| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1459354505-32551-39-git-send-email-boris.brezillon@free-electrons.com>
Date: Wed, 30 Mar 2016 18:14:53 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>
Cc: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Ralf Baechle <ralf@...ux-mips.org>, linux-mips@...ux-mips.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Wenyou Yang <wenyou.yang@...el.com>,
Josh Wu <rainyfeeling@...look.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, linux-sunxi@...glegroups.com,
Stefan Agner <stefan@...er.ch>,
Kyungmin Park <kyungmin.park@...sung.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
punnaiah choudary kalluri <punnaia@...inx.com>,
Priit Laes <plaes@...es.org>,
Kamal Dasu <kdasu.kdev@...il.com>,
bcm-kernel-feedback-list@...adcom.com, linux-api@...r.kernel.org,
Harvey Hunt <harvey.hunt@...tec.com>,
Archit Taneja <architt@...eaurora.org>,
Han Xu <b45815@...escale.com>,
Huang Shijie <shijie.huang@....com>
Subject: [PATCH v5 38/50] mtd: nand: mxc: switch to mtd_ooblayout_ops
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
drivers/mtd/nand/mxc_nand.c | 212 ++++++++++++++++++++++----------------------
1 file changed, 105 insertions(+), 107 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 854c832..628f834 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -149,7 +149,7 @@ struct mxc_nand_devtype_data {
int (*check_int)(struct mxc_nand_host *);
void (*irq_control)(struct mxc_nand_host *, int);
u32 (*get_ecc_status)(struct mxc_nand_host *);
- struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ const struct mtd_ooblayout_ops *ooblayout;
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
@@ -200,73 +200,6 @@ struct mxc_nand_host {
struct mxc_nand_platform_data pdata;
};
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
- .eccbytes = 5,
- .eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {12, 4}, }
-};
-
-static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
-};
-
-/* OOB description for 512 byte pages with 16 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
- .eccbytes = 1 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15
- },
- .oobfree = {
- {.offset = 0, .length = 5}
- }
-};
-
-/* OOB description for 2048 byte pages with 64 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
- .eccbytes = 4 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7}
- }
-};
-
-/* OOB description for 4096 byte pages with 128 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_4k = {
- .eccbytes = 8 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7},
- {.offset = 64, .length = 7},
- {.offset = 80, .length = 7},
- {.offset = 96, .length = 7},
- {.offset = 112, .length = 7},
- }
-};
-
static const char * const part_probes[] = {
"cmdlinepart", "RedBoot", "ofpart", NULL };
@@ -942,6 +875,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = ((section - 1) * 16) +
+ nand_chip->ecc.bytes + 6;
+ if (section < nand_chip->ecc.steps)
+ oobregion->length = (section * 16) + 6 -
+ oobregion->offset;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
+ .ecc = mxc_v1_ooblayout_ecc,
+ .free = mxc_v1_ooblayout_free,
+};
+
+static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * stepsize) + 7;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = section * stepsize;
+ oobregion->length = 7;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
+ .ecc = mxc_v2_ooblayout_ecc,
+ .free = mxc_v2_ooblayout_free,
+};
+
/*
* v2 and v3 type controllers can do 4bit or 8bit ecc depending
* on how much oob the nand chip has. For 8bit ecc we need at least
@@ -959,23 +985,6 @@ static int get_eccsize(struct mtd_info *mtd)
return 8;
}
-static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
-{
- int i, j;
-
- layout->eccbytes = 8*18;
- for (i = 0; i < 8; i++)
- for (j = 0; j < 18; j++)
- layout->eccpos[i*18 + j] = i*26 + j + 7;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = 4;
- for (i = 1; i < 8; i++) {
- layout->oobfree[i].offset = i*26;
- layout->oobfree[i].length = 7;
- }
-}
-
static void preset_v1(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
@@ -1269,9 +1278,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 1,
@@ -1294,9 +1301,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 0,
@@ -1320,9 +1325,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v2,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v2,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1346,9 +1349,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1373,9 +1374,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1576,7 +1575,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->select_chip = host->devtype_data->select_chip;
this->ecc.size = 512;
- this->ecc.layout = host->devtype_data->ecclayout_512;
+ mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
@@ -1649,12 +1648,11 @@ static int mxcnd_probe(struct platform_device *pdev)
/* Call preset again, with correct writesize this time */
host->devtype_data->preset(mtd);
- if (mtd->writesize == 2048)
- this->ecc.layout = host->devtype_data->ecclayout_2k;
- else if (mtd->writesize == 4096) {
- this->ecc.layout = host->devtype_data->ecclayout_4k;
- if (get_eccsize(mtd) == 8)
- ecc_8bit_layout_4k(this->ecc.layout);
+ if (!this->ecc.bytes) {
+ if (host->eccsize == 8)
+ this->ecc.bytes = 18;
+ else if (host->eccsize == 4)
+ this->ecc.bytes = 9;
}
/*
--
2.5.0
Powered by blists - more mailing lists