linux-kernel - Re: [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for fiber

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <56FC2A62.6040206@cisco.com>
Date:	Wed, 30 Mar 2016 12:34:58 -0700
From:	Daniel Walker <danielwa@...co.com>
To:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Shannon Nelson <shannon.nelson@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Bruce Allan <bruce.w.allan@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	Mitch Williams <mitch.a.williams@...el.com>
Cc:	Steve Shih <sshih@...co.com>, danielwa@...o99.com,
	xe-kernel@...ernal.cisco.com, intel-wired-lan@...ts.osuosl.org,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool
 autoneg off for fiber


So Intel maintainers (Jeff, Jesse, Shannon, Carolyn, Don, Bruce, and John)

I'm assuming no comments means this patch is acceptable , and I will 
resubmit it without the RFC. Is that acceptable ?


On 03/25/2016 02:58 PM, Daniel Walker wrote:
> From: Steve Shih <sshih@...co.com>
>
> This patch fixes the issues for disabling auto-negotiation and forcing
> speed and duplex settings for the fiber media.
>
> For fiber media, e1000_get_settings should return ETH_TP_MDI_INVALID for
> eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
> call would not fail with -EOPNOTSUPP.
>
> e1000_set_spd_dplx should not automatically turn autoneg back on for forced
> 1000 Mbps full duplex settings.
>
> Cc: danielwa@...o99.com
> Cc: xe-kernel@...ernal.cisco.com
> Signed-off-by: Steve Shih <sshih@...co.com>
> ---
>   drivers/net/ethernet/intel/e1000e/ethtool.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
> index 6cab1f3..cd03dcd 100644
> --- a/drivers/net/ethernet/intel/e1000e/ethtool.c
> +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
> @@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
>   	else
>   		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
>   
> +	if (hw->phy.media_type != e1000_media_type_copper)
> +		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
> +
>   	return 0;
>   }
>   
> @@ -236,8 +239,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
>   		mac->forced_speed_duplex = ADVERTISE_100_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_FULL:
> -		mac->autoneg = 1;
> -		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
> +		mac->forced_speed_duplex = ADVERTISE_1000_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
>   	default: