| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1459424685-26965-4-git-send-email-irina.tirdea@intel.com>
Date: Thu, 31 Mar 2016 14:44:44 +0300
From: Irina Tirdea <irina.tirdea@...el.com>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org, linux-acpi@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Octavian Purdila <octavian.purdila@...el.com>,
Cristina Ciocan <cristina.ciocan@...el.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Irina Tirdea <irina.tirdea@...el.com>
Subject: [RFC PATCH 3/4] pinctrl: Add ACPI support
Add ACPI support for pin controller properties. These are
based on ACPI _DSD properties and follow the device tree
model based on states and node configurations. The states
are defined as _DSD properties and configuration nodes
are defined using the _DSD Hierarchical Properties Extension.
A configuration node supports the generic device tree properties.
The implementation is based on device tree code from devicetree.c.
Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
---
Documentation/acpi/pinctrl-properties.txt | 274 +++++++++++++++++++++++++
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/acpi.c | 322 ++++++++++++++++++++++++++++++
drivers/pinctrl/acpi.h | 32 +++
drivers/pinctrl/core.c | 26 +++
drivers/pinctrl/core.h | 2 +
6 files changed, 657 insertions(+)
create mode 100644 Documentation/acpi/pinctrl-properties.txt
create mode 100644 drivers/pinctrl/acpi.c
create mode 100644 drivers/pinctrl/acpi.h
diff --git a/Documentation/acpi/pinctrl-properties.txt b/Documentation/acpi/pinctrl-properties.txt
new file mode 100644
index 0000000..e93aaaf
--- /dev/null
+++ b/Documentation/acpi/pinctrl-properties.txt
@@ -0,0 +1,274 @@
+= _DSD Device Properties related to pin controllers =
+
+== Introduction ==
+
+This document is an extension of the pin control subsystem in Linux [1]
+and provides a way to describe pin controller properties in ACPI. It is
+based on the Device Specific Data (_DSD) configuration object [2] that
+was introduced in ACPI 5.1.
+
+Pin controllers are hardware modules that control pins by allowing pin
+multiplexing and configuration. Pin multiplexing allows using the same
+physical pins for multiple functions; for example, one pin or group of pins
+may be used for the I2C bus, SPI bus or as general-purpose GPIO pin. Pin
+configuration allows setting various properties such as pull-up/down,
+tri-state, drive-strength, etc.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. For a client device to operate correctly,
+certain pin controllers must set up certain specific pin configurations.
+Some client devices need a single static pin configuration, e.g. set up
+during initialization. Others need to reconfigure pins at run-time,
+for example to tri-state pins when the device is inactive. Hence, each
+client device can define a set of named states. Each named state is
+mapped to a pin controller configuration that describes the pin multiplexing
+or configuration for that state.
+
+In ACPI, each pin controller and each client device is represented as an
+ACPI device, just like any other hardware module. The pin controller
+properties are defined using _DSD properties [2] under these devices.
+The named states are defined using Device Properties UUID [3] under the
+ACPI client device. The configuration nodes are defined using Hierarchical
+Properties Extension UUID [4] and are split between the ACPI client device
+and the pin controller device. The configuration nodes contain properties
+that describe pin multiplexing or configuration that very similar to the
+ones used for device tree [5].
+
+== Example ==
+
+For example, let's consider an accelerometer connected to the I2C bus on
+a platform with a Baytrail pin controller. The accelerometer uses 2 GPIO
+pins for I2C (SDA, SCL) and one GPIO pin for interrupt.
+
+The name for the pins, groups and functions used are the ones defined in the
+pin controller driver, in the same way as it is done for device tree [5].
+
+For the I2C pins, the pin controller driver defines one group called
+"i2c5_grp" that can be multiplexed with functions "i2c" or "gpio".
+In our case, we need to select function "i2c" for group "i2c5_grp" in
+the ACPI description.
+
+For the GPIO pin, the pin controller driver defines the name "GPIO_S5[00]"
+for the pin with index 0 that we use. We need to configure this pin to
+pull-down with pull strength of 10000 Ohms. We might also want to disable
+the bias for the GPIO interrupt pin when entering sleep.
+
+Here is an ASL example for this device:
+
+ // Pin controller device
+ Scope (_SB.GPO0)
+ {
+ Name (MUX0, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ Package (2) {"function", "i2c"},
+ Package (2) {"groups", Package () {"i2c5_grp"}},
+ }
+ })
+
+ Name (CFG0, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ Package (2) {"pins", Package () {"GPIO_S5[00]"}},
+ Package (2) {"bias-pull-down", 10000},
+ }
+ })
+
+ Name (CFG1, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ Package (2) {"pins", Package () {"GPIO_S5[00]"}},
+ Package (2) {"bias-disable", 0},
+ }
+ })
+ }
+
+ // Accelerometer device with default pinmux and pinconfig for i2c and
+ // GPIO pins
+ Scope (_SB.I2C0)
+ {
+ Device (ACL0)
+ {
+ Name (_HID, ...)
+
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RBUF, ResourceTemplate ()
+ {
+ I2cSerialBus (...)
+ GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { 0 }
+ })
+ Return (RBUF)
+ }
+
+ Name (_DSD, Package ()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () {"pinctrl-names", Package() {"default", "sleep"}},
+ Package ()
+ {
+ "pinctrl-0",
+ Package()
+ {
+ "accel-default-mux-i2c",
+ "accel-default-cfg-int",
+ }
+ },
+ Package ()
+ {
+ "pinctrl-1",
+ Package()
+ {
+ "accel-sleep-cfg-int",
+ }
+ },
+
+ },
+ ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package ()
+ {
+ Package (2) {"accel-default-mux-i2c", "\\_SB.GPO0.MUX0"},
+ Package (2) {"accel-default-cfg-int", "\\_SB.GPO0.CFG0"},
+ Package (2) {"accel-sleep-cfg-int", "\\_SB.GPO0.CFG1"},
+ },
+ })
+ }
+ }
+
+In the ASL excerpt, the accelerometer device has 2 states:
+ - a default state with 2 pin configurations:
+ - a pin multiplexing node for the i2c pins that sets function "i2c"
+ for the "i2c5_grp" pin group
+ - a pin configuration node for the GPIO interrupt pin that pull down
+ the "GPIO_S5[00]" pin and sets a pull strength of 10000 Ohms
+ - a sleep state with 1 pin configuration:
+ - a pin configuration node for pin "GPIO_S5[00]" that disables pin
+ bias
+
+== _DSD pinctrl properties format ==
+
+=== Pin controller client device states ===
+
+The pinctrl states are defined under the device node they apply to.
+The format of the pinctrl states is:
+
+ Name (_DSD, Package ()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () {"pinctrl-names", Package() {statename0, statename1, ...}},
+ Package () {"pinctrl-0", Package() {cfgname0, cfgname1, ...}},
+ Package () {"pinctrl-1", Package() {cfgname2, cfgname3, ...}},
+ }
+ }
+
+ statename - name of the pinctrl device state (e.g.: default, sleep, etc.).
+ These names are associated with the lists of configurations
+ defined below: statename0 defines the name for configuration
+ property "pinctrl-0", statename1 defines the name for
+ configuration property "pinctrl-1", etc.
+ cfgname - name for the configuration data-only subnode.
+
+=== Pin controller configuration nodes ===
+
+The configuration data-only subnodes are defined using the Hierarchical
+Properties Extension UUID [4]. Their definition is split between the device
+node and the pin controller node. The format for these subnodes is:
+
+ Scope (DEV0)
+ {
+ Name (_DSD, Package ()
+ {
+ ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package ()
+ {
+ Package (2) {cfgname0, "\\GPO0.DNP0"},
+ Package (2) {cfgname1, "\\GPO0.DNP1"},
+ },
+ })
+ }
+
+ Scope (GPO0)
+ {
+ Name (DPN0, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package() {...}
+ })
+ Name (DPN1, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package() {...}
+ })
+ }
+
+Each DPN data subnode is a regular _DSD node that uses Device Properties
+UUID [3]. There are 2 types of subnodes, depending on the properties it
+contains: pin multiplexing nodes and pin configuration nodes.
+
+==== Pin multiplexing nodes ====
+
+The pin multiplexing nodes must contain a property named "function" and
+define a mux function to be applied to a list of pin groups. The properties
+supported by this node are the same as for device tree [5]. The name for the
+pins, groups and functions used are the ones defined in the pin controller
+driver, in the same way as it is done for device tree [5]. The format for
+this data subnode is:
+
+ Name (DPN0, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ Package (2) {"function", functioname},
+ Package (2) {"groups", Package () {groupname1, groupname2, ...}},
+ }
+ })
+
+ functioname - the pinmux function to select.
+ groups - the list of groups to select with this function
+
+==== Pin configuration nodes ====
+
+The pin configuration nodes do not contain a property named "function".
+They must contain a property named "group" or "pins". They will also
+contain one or more configuration properties like bias-pull-up,
+drive-open-drain, etc. The properties supported by this node are the
+same as for device tree. Standard pinctrl properties are defined in the
+device tree documentation [5] and in <include/linux/pinctrl/pinconf-generic.h>.
+Pinctrl drivers may also define their own custom properties. The name for the
+pins/groups used are the ones defined in the pin controller driver, in the
+same way as it is done for device tree [5]. The format for the data subnode is:
+
+ Name (DPN0, Package()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package()
+ {
+ Package (2) {"pins", Package () {pin1, pin2, ...}},
+ Package (2) {configname1, configval1},
+ Package (2) {configname2, configval2},
+ }
+ })
+
+ pins - list of pins that properties in the node apply to
+ configname - name of the pin configuration property
+ configval - value of the pin configuration property
+
+== References ==
+
+[1] Documentation/pinctrl.txt
+[2] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm
+[3] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+[4] http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf
+[5] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e4bc115..12d3af6 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -6,6 +6,7 @@ obj-y += core.o pinctrl-utils.o
obj-$(CONFIG_PINMUX) += pinmux.o
obj-$(CONFIG_PINCONF) += pinconf.o
obj-$(CONFIG_OF) += devicetree.o
+obj-$(CONFIG_ACPI) += acpi.o
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o
obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
diff --git a/drivers/pinctrl/acpi.c b/drivers/pinctrl/acpi.c
new file mode 100644
index 0000000..bed1d88
--- /dev/null
+++ b/drivers/pinctrl/acpi.c
@@ -0,0 +1,322 @@
+/*
+ * ACPI integration for the pin control subsystem
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * Derived from:
+ * devicetree.c - Copyright (C) 2012 NVIDIA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "acpi.h"
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+/**
+ * struct pinctrl_acpi_map - mapping table chunk parsed from ACPI
+ * @node: list node for struct pinctrl's @fw_maps field
+ * @pctldev: the pin controller that allocated this struct, and will free it
+ * @maps: the mapping table entries
+ */
+struct pinctrl_acpi_map {
+ struct list_head node;
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_map *map;
+ unsigned num_maps;
+};
+
+static void acpi_maps_list_dh(acpi_handle handle, void *data)
+{
+ /* The address of this function is used as a key. */
+}
+
+static struct list_head *acpi_get_maps(struct device *dev)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct list_head *maps;
+ acpi_status status;
+
+ status = acpi_get_data(handle, acpi_maps_list_dh, (void **)&maps);
+ if (ACPI_FAILURE(status))
+ return NULL;
+
+ return maps;
+}
+
+static void acpi_free_maps(struct device *dev, struct list_head *maps)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+
+ acpi_detach_data(handle, acpi_maps_list_dh);
+ kfree(maps);
+}
+
+static int acpi_init_maps(struct device *dev)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct list_head *maps;
+ acpi_status status;
+
+ maps = kzalloc(sizeof(*maps), GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(maps);
+
+ status = acpi_attach_data(handle, acpi_maps_list_dh, maps);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return 0;
+}
+
+void pinctrl_acpi_free_maps(struct pinctrl *p)
+{
+ struct pinctrl_acpi_map *map, *_map;
+ struct list_head *maps;
+
+ maps = acpi_get_maps(p->dev);
+ if (!maps)
+ goto out;
+
+ list_for_each_entry_safe(map, _map, maps, node) {
+ pinctrl_unregister_map(map->map);
+ list_del(&map->node);
+ pinctrl_utils_free_map(map->pctldev, map->map, map->num_maps);
+ kfree(map);
+ }
+
+ acpi_free_maps(p->dev, maps);
+out:
+ acpi_bus_put_acpi_device(ACPI_COMPANION(p->dev));
+}
+
+static int acpi_remember_or_free_map(struct pinctrl *p, const char *statename,
+ struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ struct pinctrl_acpi_map *acpi_map;
+ struct list_head *acpi_maps;
+ unsigned int i;
+
+ acpi_maps = acpi_get_maps(p->dev);
+ if (!acpi_maps)
+ return -EINVAL;
+
+ /* Initialize common mapping table entry fields */
+ for (i = 0; i < num_maps; i++) {
+ map[i].dev_name = dev_name(p->dev);
+ map[i].name = statename;
+ if (pctldev)
+ map[i].ctrl_dev_name = dev_name(pctldev->dev);
+ }
+
+ /* Remember the converted mapping table entries */
+ acpi_map = kzalloc(sizeof(*acpi_map), GFP_KERNEL);
+ if (!acpi_map) {
+ pinctrl_utils_free_map(pctldev, map, num_maps);
+ return -ENOMEM;
+ }
+
+ acpi_map->pctldev = pctldev;
+ acpi_map->map = map;
+ acpi_map->num_maps = num_maps;
+ list_add_tail(&acpi_map->node, acpi_maps);
+
+ return pinctrl_register_map(map, num_maps, false);
+}
+
+static int acpi_remember_dummy_state(struct pinctrl *p, const char *statename)
+{
+ struct pinctrl_map *map;
+
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
+ if (!map)
+ return -ENOMEM;
+
+ /* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */
+ map->type = PIN_MAP_TYPE_DUMMY_STATE;
+
+ return acpi_remember_or_free_map(p, statename, NULL, map, 1);
+}
+
+static struct pinctrl_dev *acpi_find_pctldev(struct fwnode_handle *fw_config)
+{
+ struct acpi_buffer path = {ACPI_ALLOCATE_BUFFER, NULL};
+ acpi_handle pctrl_handle, cfg_handle;
+ struct acpi_data_node *dn;
+ acpi_status status;
+ int ret;
+
+ /*
+ * In ACPI, the pinctrl device is the parent of the configuration
+ * node. In the kernel internal representation, the device node is
+ * the parent of the configuration node. We need to extract the
+ * original path for the configuration node and search for its parent
+ * in the ACPI hierarchy.
+ */
+ dn = to_acpi_data_node(fw_config);
+ if (!dn)
+ return ERR_PTR(-EINVAL);
+
+ ret = acpi_get_name(dn->handle, ACPI_FULL_PATHNAME, &path);
+ if (ret)
+ return ERR_PTR(ret);
+
+ status = acpi_get_handle(NULL, (char *)path.pointer, &cfg_handle);
+ kfree(path.pointer);
+ if (ACPI_FAILURE(status))
+ return ERR_PTR(-EINVAL);
+
+ status = acpi_get_parent(cfg_handle, &pctrl_handle);
+ if (ACPI_FAILURE(status))
+ return ERR_PTR(-EINVAL);
+
+ return get_pinctrl_dev_from_acpi(pctrl_handle);
+}
+
+static int acpi_to_map_one_config(struct pinctrl *p, const char *statename,
+ struct fwnode_handle *fw_config)
+{
+ struct pinctrl_map *map;
+ struct pinctrl_dev *pctldev;
+ unsigned num_maps;
+ int ret;
+
+ /* Find the pin controller containing fw_config */
+ pctldev = acpi_find_pctldev(fw_config);
+ if (!pctldev)
+ return -ENODEV;
+ if (IS_ERR(pctldev))
+ return PTR_ERR(pctldev);
+
+ /* Parse ACPI node and generate mapping table entries */
+ ret = pinconf_generic_fwnode_to_map(pctldev, fw_config, &map, &num_maps,
+ PIN_MAP_TYPE_INVALID);
+ if (ret < 0)
+ return ret;
+
+ /* Stash the mapping table chunk away for later use */
+ return acpi_remember_or_free_map(p, statename, pctldev, map, num_maps);
+}
+
+static struct fwnode_handle *acpi_find_config_prop(struct device *dev,
+ char *propname)
+{
+ struct fwnode_handle *child;
+ struct acpi_data_node *dn;
+
+ /*
+ * Pinctrl configuration properties are described with ACPI data
+ * nodes using _DSD Hierarchical Properties Extension.
+ */
+ device_for_each_child_node(dev, child) {
+ dn = to_acpi_data_node(child);
+ if (!dn)
+ continue;
+ if (!strcmp(dn->name, propname))
+ break;
+ }
+
+ return child;
+}
+
+int pinctrl_acpi_to_map(struct pinctrl *p)
+{
+ const union acpi_object *prop, *statenames, *configs;
+ unsigned int state, nstates, nconfigs, config;
+ char *statename, *propname, *configname;
+ struct fwnode_handle *fw_prop;
+ struct acpi_device *adev;
+ int ret;
+
+ /* We may store pointers to property names within the node */
+ adev = acpi_bus_get_acpi_device(ACPI_HANDLE(p->dev));
+ if (!adev)
+ return -ENODEV;
+
+ /* Only allow named states (device must have prop 'pinctrl-names') */
+ ret = acpi_dev_get_property(adev, "pinctrl-names", ACPI_TYPE_PACKAGE,
+ &prop);
+ if (ret) {
+ acpi_bus_put_acpi_device(adev);
+ /* No pinctrl properties */
+ return 0;
+ }
+ statenames = prop->package.elements;
+ nstates = prop->package.count;
+
+ ret = acpi_init_maps(p->dev);
+ if (ret)
+ return ret;
+
+ /* For each defined state ID */
+ for (state = 0; state < nstates; state++) {
+ /* Get state name */
+ if (statenames[state].type != ACPI_TYPE_STRING) {
+ ret = -EINVAL;
+ goto err_free_map;
+ }
+ statename = statenames[state].string.pointer;
+
+ /* Retrieve the pinctrl-* property */
+ propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state);
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_PACKAGE,
+ &prop);
+ kfree(propname);
+ if (ret)
+ break;
+ configs = prop->package.elements;
+ nconfigs = prop->package.count;
+
+ /* For every referenced pin configuration node in it */
+ for (config = 0; config < nconfigs; config++) {
+ if (configs[config].type != ACPI_TYPE_STRING) {
+ ret = -EINVAL;
+ goto err_free_map;
+ }
+ configname = configs[config].string.pointer;
+
+ /*
+ * Look up the pin configuration node as
+ * an ACPI data node in the device node.
+ */
+ fw_prop = acpi_find_config_prop(p->dev, configname);
+ if (!fw_prop) {
+ ret = -EINVAL;
+ goto err_free_map;
+ }
+
+ /* Parse the configuration node */
+ ret = acpi_to_map_one_config(p, statename, fw_prop);
+ if (ret < 0)
+ goto err_free_map;
+ }
+ /* No entries in ACPI? Generate a dummy state table entry */
+ if (!nconfigs) {
+ ret = acpi_remember_dummy_state(p, statename);
+ if (ret < 0)
+ goto err_free_map;
+ }
+ }
+
+ return 0;
+
+err_free_map:
+ pinctrl_acpi_free_maps(p);
+ return ret;
+}
diff --git a/drivers/pinctrl/acpi.h b/drivers/pinctrl/acpi.h
new file mode 100644
index 0000000..fb9f6ed
--- /dev/null
+++ b/drivers/pinctrl/acpi.h
@@ -0,0 +1,32 @@
+/*
+ * Internal interface to pinctrl ACPI integration
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifdef CONFIG_ACPI
+
+void pinctrl_acpi_free_maps(struct pinctrl *p);
+int pinctrl_acpi_to_map(struct pinctrl *p);
+
+#else
+
+static inline int pinctrl_acpi_to_map(struct pinctrl *p)
+{
+ return 0;
+}
+
+static inline void pinctrl_acpi_free_maps(struct pinctrl *p)
+{
+}
+
+#endif
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index f67a8b7..1bf3774 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -36,6 +36,7 @@
#include "devicetree.h"
#include "pinmux.h"
#include "pinconf.h"
+#include "acpi.h"
static bool pinctrl_dummy_state;
@@ -137,6 +138,23 @@ struct pinctrl_dev *get_pinctrl_dev_from_of_node(struct device_node *np)
return NULL;
}
+struct pinctrl_dev *get_pinctrl_dev_from_acpi(acpi_handle handle)
+{
+ struct pinctrl_dev *pctldev;
+
+ mutex_lock(&pinctrldev_list_mutex);
+
+ list_for_each_entry(pctldev, &pinctrldev_list, node)
+ if (ACPI_HANDLE(pctldev->dev) == handle) {
+ mutex_unlock(&pinctrldev_list_mutex);
+ return pctldev;
+ }
+
+ mutex_unlock(&pinctrldev_list_mutex);
+
+ return NULL;
+}
+
/**
* pin_get_from_name() - look up a pin number from a name
* @pctldev: the pin control device to lookup the pin on
@@ -827,6 +845,12 @@ static struct pinctrl *create_pinctrl(struct device *dev)
return ERR_PTR(ret);
}
+ ret = pinctrl_acpi_to_map(p);
+ if (ret < 0) {
+ kfree(p);
+ return ERR_PTR(ret);
+ }
+
devname = dev_name(dev);
mutex_lock(&pinctrl_maps_mutex);
@@ -937,6 +961,8 @@ static void pinctrl_free(struct pinctrl *p, bool inlist)
pinctrl_dt_free_maps(p);
+ pinctrl_acpi_free_maps(p);
+
if (inlist)
list_del(&p->node);
kfree(p);
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index ca08723..797ab8b 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -14,6 +14,7 @@
#include <linux/radix-tree.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/machine.h>
+#include <linux/acpi.h>
struct pinctrl_gpio_range;
@@ -171,6 +172,7 @@ struct pinctrl_maps {
struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name);
struct pinctrl_dev *get_pinctrl_dev_from_of_node(struct device_node *np);
+struct pinctrl_dev *get_pinctrl_dev_from_acpi(acpi_handle handle);
int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin);
int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
--
1.9.1
Powered by blists - more mailing lists