lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459427625-15568-2-git-send-email-LW@KARO-electronics.de>
Date:	Thu, 31 Mar 2016 14:33:41 +0200
From:	Lothar Waßmann <LW@...O-electronics.de>
To:	Dan Williams <dan.j.williams@...el.com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Mark Rutland <mark.rutland@....com>,
	Pawel Moll <pawel.moll@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Russell King <linux@....linux.org.uk>,
	Sascha Hauer <kernel@...gutronix.de>,
	Shawn Guo <shawnguo@...nel.org>,
	Vinod Koul <vinod.koul@...el.com>, devicetree@...r.kernel.org,
	dmaengine@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Cc:	Lothar Waßmann <LW@...O-electronics.de>
Subject: [PATCHv3 1/5] ARM: dts: imx6-tx6: remove regulator bus

DT maintainers don't like the 'simple-bus' container around the
regulator nodes. So remove it.

Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
 arch/arm/boot/dts/imx6qdl-tx6.dtsi | 166 +++++++++++++++++--------------------
 1 file changed, 75 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index afc6022..a3e37a7 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -93,104 +93,88 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3_etn: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3_ETN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy_power>;
-			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_3v3_etn: regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_2v5: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2V5";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
 
-		reg_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_flexcan_xcvr>;
-			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-			enable-active-low;
-		};
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-low;
+	};
 
-		reg_lcd0_pwr: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "LCD0 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd0_pwr>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	reg_lcd0_pwr: regulator-lcd0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		reg_lcd1_pwr: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD1 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd1_pwr>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	reg_lcd1_pwr: regulator-lcd1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		reg_usbh1_vbus: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usbotg_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "usbotg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg_vbus>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ