[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459520174-12897-3-git-send-email-narmstrong@baylibre.com>
Date: Fri, 1 Apr 2016 16:16:14 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
p.zabel@...gutronix.de, devicetree@...r.kernel.org
Cc: Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH 2/2] dt-bindings: Add Oxford Semiconductor Reset Controller bindings
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
.../devicetree/bindings/reset/oxnas,reset.txt | 58 ++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/oxnas,reset.txt
diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt
new file mode 100644
index 0000000..6f06db9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt
@@ -0,0 +1,58 @@
+Oxford Semiconductor OXNAS SoC Family RESET Controller
+================================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-reset"
+- #reset-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+
+For OX810SE, the indices are :
+ - 0 : ARM
+ - 1 : COPRO
+ - 2 : Reserved
+ - 3 : Reserved
+ - 4 : USBHS
+ - 5 : USBHSPHY
+ - 6 : MAC
+ - 7 : PCI
+ - 8 : DMA
+ - 9 : DPE
+ - 10 : DDR
+ - 11 : SATA
+ - 12 : SATA_LINK
+ - 13 : SATA_PHY
+ - 14 : Reserved
+ - 15 : NAND
+ - 16 : GPIO
+ - 17 : UART1
+ - 18 : UART2
+ - 19 : MISC
+ - 20 : I2S
+ - 21 : AHB_MON
+ - 22 : UART3
+ - 23 : UART4
+ - 24 : SGDMA
+ - 25 : Reserved
+ - 26 : Reserved
+ - 27 : Reserved
+ - 28 : Reserved
+ - 29 : Reserved
+ - 30 : Reserved
+ - 31 : BUS
+
+example:
+
+sys: sys-ctrl@...000 {
+ compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+ reg = <0x000000 0x100000>;
+
+ reset: reset-controller {
+ compatible = "oxsemi,ox810se-reset";
+ #reset-cells = <1>;
+ };
+};
--
1.9.1
Powered by blists - more mailing lists