[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459589383-16914-8-git-send-email-guodong.xu@linaro.org>
Date: Sat, 2 Apr 2016 17:29:34 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: xuwei5@...ilicon.com, mark.rutland@....com, robh@...nel.org,
grant.likely@...retlab.ca, linus.walleij@...aro.org,
arnd.bergmann@...aro.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
kong.kongxinwei@...ilicon.com, Chen Feng <puck.chen@...ilicon.com>
Subject: [PATCH v2 07/16] arm64: dts: add all hi6220 i2c nodes
From: Xinwei Kong <kong.kongxinwei@...ilicon.com>
This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.
Signed-off-by: Xinwei Kong <kong.kongxinwei@...ilicon.com>
Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
Signed-off-by: Wei Xu <xuwei5@...ilicon.com>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 33 +++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index dcca83b..664cc7a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -600,5 +600,38 @@
cs-gpios = <&gpio6 2 0>;
status = "ok";
};
+
+ i2c0: i2c@...00000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7100000 0x0 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...01000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7101000 0x0 0x1000>;
+ clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+ interrupts = <0 45 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...02000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7102000 0x0 0x1000>;
+ clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+ interrupts = <0 46 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "disabled";
+ };
};
};
--
1.9.1
Powered by blists - more mailing lists