| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1459616843-23829-12-git-send-email-greg@chown.ath.cx>
Date: Sat, 2 Apr 2016 19:07:20 +0200
From: Grigori Goronzy <greg@...wn.ath.cx>
To: Johan Hovold <johan@...nel.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Grigori Goronzy <greg@...wn.ath.cx>
Subject: [PATCH v2 11/14] USB: ch341: clean up messages
No functional change. Remove explicit function name printing, it's
easy to use dynamic debug to print it every time, if required.
Fix capitalization and phrasing in some cases. Drop useless
information like a USB buffer pointer, which is not helpful.
Signed-off-by: Grigori Goronzy <greg@...wn.ath.cx>
---
drivers/usb/serial/ch341.c | 48 +++++++++++++++++++++-------------------------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 980dcea..ba654e1 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -107,7 +107,7 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
{
int r;
- dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n",
+ dev_dbg(&dev->dev, "control_out(%02x,%02x,%04x,%04x)\n",
USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
@@ -123,9 +123,9 @@ static int ch341_control_in(struct usb_device *dev,
{
int r;
- dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n",
+ dev_dbg(&dev->dev, "control_in(%02x,%02x,%04x,%04x,%u)\n",
USB_DIR_IN|0x40, (int)request, (int)value, (int)index,
- buf, (int)bufsize);
+ (int)bufsize);
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
@@ -330,11 +330,11 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
if (tty)
ch341_set_termios(tty, port, NULL);
- dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__);
+ dev_dbg(&port->dev, "Submitting interrupt URB\n");
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
- dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
- __func__, r);
+ dev_err(&port->dev,
+ "Failed to submit interrupt URB: %d\n", r);
goto out;
}
@@ -416,8 +416,7 @@ static void ch341_set_termios(struct tty_struct *tty,
CH341_REG_RTSCTS | ((uint16_t)CH341_REG_RTSCTS << 8),
0x0101);
if (r < 0) {
- dev_err(&port->dev, "%s - USB control write error (%d)\n",
- __func__, r);
+ dev_err(&port->dev, "USB control write error: %d\n", r);
tty->termios.c_cflag &= ~CRTSCTS;
}
}
@@ -439,29 +438,27 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
ch341_break_reg, 0, break_reg, 2);
if (r < 0) {
- dev_err(&port->dev, "%s - USB control read error (%d)\n",
- __func__, r);
+ dev_err(&port->dev, "USB control read error: %d\n", r);
goto out;
}
- dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
- __func__, break_reg[0], break_reg[1]);
+ dev_dbg(&port->dev, "Initial break register contents - reg1: %x, reg2: %x\n",
+ break_reg[0], break_reg[1]);
if (break_state != 0) {
- dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
+ dev_dbg(&port->dev, "Enter break state requested\n");
break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
break_reg[1] &= ~CH341_LCR_ENABLE_TX;
} else {
- dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
+ dev_dbg(&port->dev, "Leave break state requested\n");
break_reg[0] |= CH341_NBREAK_BITS_REG1;
break_reg[1] |= CH341_LCR_ENABLE_TX;
}
- dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
- __func__, break_reg[0], break_reg[1]);
+ dev_dbg(&port->dev, "New break register contents - reg1: %x, reg2: %x\n",
+ break_reg[0], break_reg[1]);
reg_contents = get_unaligned_le16(break_reg);
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
ch341_break_reg, reg_contents);
if (r < 0)
- dev_err(&port->dev, "%s - USB control write error (%d)\n",
- __func__, r);
+ dev_err(&port->dev, "USB control write error: %d\n", r);
out:
kfree(break_reg);
}
@@ -509,7 +506,7 @@ static void ch341_update_line_status(struct usb_serial_port *port,
spin_unlock_irqrestore(&priv->lock, flags);
if (data[1] & CH341_MULT_STAT)
- dev_dbg(&port->dev, "%s - multiple status change\n", __func__);
+ dev_dbg(&port->dev, "Multiple status change\n");
if (!delta)
return;
@@ -548,12 +545,12 @@ static void ch341_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
- __func__, urb->status);
+ dev_dbg(&urb->dev->dev, "URB shutting down: %d\n",
+ urb->status);
return;
default:
- dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
- __func__, urb->status);
+ dev_dbg(&urb->dev->dev, "Nonzero URB status: %d\n",
+ urb->status);
goto exit;
}
@@ -562,8 +559,7 @@ static void ch341_read_int_callback(struct urb *urb)
exit:
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- dev_err(&urb->dev->dev, "%s - usb_submit_urb failed: %d\n",
- __func__, status);
+ dev_err(&urb->dev->dev, "URB submit failed: %d\n", status);
}
}
@@ -588,7 +584,7 @@ static int ch341_tiocmget(struct tty_struct *tty)
| ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
| ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
- dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
+ dev_dbg(&port->dev, "Result = %x\n", result);
return result;
}
--
1.9.1
Powered by blists - more mailing lists