Message-ID: <1459845266-2771-1-git-send-email-akarwar@marvell.com>
Date:	Tue, 5 Apr 2016 01:34:26 -0700
From:	Amitkumar Karwar <akarwar@...vell.com>
To:	<linux-bluetooth@...r.kernel.org>
CC:	<linux-kernel@...r.kernel.org>, Ganapathi Bhat <gbhat@...vell.com>,
	Amitkumar Karwar <akarwar@...vell.com>
Subject: [PATCH v7] Bluetooth: hci_uart: Support firmware download for Marvell

From: Ganapathi Bhat <gbhat@...vell.com>

This patch implement firmware download feature for
Marvell Bluetooth devices. If firmware is already
downloaded, it will skip downloading.

Signed-off-by: Ganapathi Bhat <gbhat@...vell.com>
Signed-off-by: Amitkumar Karwar <akarwar@...vell.com>
---
v2: Fixed compilation warning reported by kbuild test robot
v3: Addressed review comments from Marcel Holtmann
    a) Removed vendor specific code from hci_ldisc.c
    b) Get rid of static forward declaration
    c) Removed unnecessary heavy nesting
    d) Git rid of module parameter and global variables
    e) Add logic to pick right firmware image
v4: Addresses review comments from Alan
    a) Use existing kernel helper APIs instead of writing own.
    b) Replace mdelay() with msleep()
v5: Addresses review comments from Loic Poulain
    a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG
    b) Used static functions where required and removed forward delcarations
    c) Edited comments for the function hci_uart_recv_data
    d) Made HCI_UART_DNLD_FW flag a part of driver private data
v6: Addresses review comments from Loic Poulain
    a) Used skb instead of array to store firmware data during download
    b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write
    c) Used GFP_KERNEL instead of GFP_ATOMIC
v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change resolves
    errors reported by kbuild test robot.
---
 drivers/bluetooth/Kconfig     |  11 +
 drivers/bluetooth/Makefile    |   1 +
 drivers/bluetooth/btmrvl.h    |  43 ++++
 drivers/bluetooth/hci_ldisc.c |   6 +
 drivers/bluetooth/hci_mrvl.c  | 568 ++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/hci_uart.h  |   8 +-
 6 files changed, 636 insertions(+), 1 deletion(-)
 create mode 100644 drivers/bluetooth/btmrvl.h
 create mode 100644 drivers/bluetooth/hci_mrvl.c

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index cf50fd2..daafd0c 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX
 
 	  Say Y here to compile support for Intel AG6XX protocol.
 
+config BT_HCIUART_MRVL
+	bool "Marvell protocol support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	help
+	  Marvell is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Marvell Bluetooth
+	  devices with UART interface.
+
+	  Say Y here to compile support for HCI MRVL protocol.
+
 config BT_HCIBCM203X
 	tristate "HCI BCM203x USB driver"
 	depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 9c18939..364dbb6 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -37,6 +37,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
 hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
 hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
 hci_uart-$(CONFIG_BT_HCIUART_AG6XX)	+= hci_ag6xx.o
+hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
 hci_uart-objs				:= $(hci_uart-y)
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/btmrvl.h b/drivers/bluetooth/btmrvl.h
new file mode 100644
index 0000000..66855de
--- /dev/null
+++ b/drivers/bluetooth/btmrvl.h
@@ -0,0 +1,43 @@
+/* Bluetooth support for Marvell devices
+ *
+ * Copyright (C) 2016, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+struct fw_data {
+	wait_queue_head_t init_wait_q __aligned(4);
+	u8 wait_fw;
+	int next_len;
+	u8 five_bytes[5];
+	u8 next_index;
+	u8 last_ack;
+	u8 expected_ack;
+	struct ktermios old_termios;
+	u8 chip_id;
+	u8 chip_rev;
+	struct sk_buff *skb;
+};
+
+#define MRVL_HELPER_NAME	"mrvl/helper_uart_3000000.bin"
+#define MRVL_8997_FW_NAME	"mrvl/uart8997_bt.bin"
+#define MRVL_WAIT_TIMEOUT	12000
+#define MRVL_MAX_FW_BLOCK_SIZE	1024
+#define MRVL_MAX_RETRY_SEND	12
+#define MRVL_DNLD_DELAY		100
+#define MRVL_ACK		0x5A
+#define MRVL_NAK		0xBF
+#define MRVL_HDR_REQ_FW		0xA5
+#define MRVL_HDR_CHIP_VER	0xAA
+#define MRVL_HCI_OP_SET_BAUD	0xFC09
+#define MRVL_FW_HDR_LEN		5
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c00168a..b858758 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -807,6 +807,9 @@ static int __init hci_uart_init(void)
 #ifdef CONFIG_BT_HCIUART_AG6XX
 	ag6xx_init();
 #endif
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_init();
+#endif
 
 	return 0;
 }
@@ -842,6 +845,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_AG6XX
 	ag6xx_deinit();
 #endif
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_deinit();
+#endif
 
 	/* Release tty registration of line discipline */
 	err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c
new file mode 100644
index 0000000..bca47fd
--- /dev/null
+++ b/drivers/bluetooth/hci_mrvl.c
@@ -0,0 +1,568 @@
+/* Bluetooth HCI UART driver for Marvell devices
+ *
+ * Copyright (C) 2016, Marvell International Ltd.
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+#include <linux/firmware.h>
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btmrvl.h"
+
+#define HCI_UART_DNLD_FW	2
+
+struct mrvl_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct fw_data *fwdata;
+	unsigned long flags;
+};
+
+static int get_cts(struct hci_uart *hu)
+{
+	struct tty_struct *tty = hu->tty;
+	u32 state;
+
+	if (tty->ops->tiocmget) {
+		state = tty->ops->tiocmget(tty);
+		if (state & TIOCM_CTS) {
+			bt_dev_dbg(hu->hdev, "CTS is low");
+			return 1;
+		}
+		bt_dev_dbg(hu->hdev, "CTS is high");
+		return 0;
+	}
+	return -1;
+}
+
+/* Initialize protocol */
+static int mrvl_open(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
+	if (!mrvl)
+		return -ENOMEM;
+
+	skb_queue_head_init(&mrvl->txq);
+	hu->priv = mrvl;
+
+	return 0;
+}
+
+/* Flush protocol data */
+static int mrvl_flush(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	skb_queue_purge(&mrvl->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int mrvl_close(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	skb_queue_purge(&mrvl->txq);
+	kfree_skb(mrvl->rx_skb);
+	kfree(mrvl->fwdata);
+	hu->priv = NULL;
+	kfree(mrvl);
+
+	return 0;
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) */
+static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags))
+		return -EBUSY;
+
+	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&mrvl->txq, skb);
+
+	return 0;
+}
+
+static const struct h4_recv_pkt mrvl_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+/* Send ACK/NAK to the device */
+static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack)
+{
+	struct tty_struct *tty = hu->tty;
+
+	tty->ops->write(tty, &ack, sizeof(ack));
+}
+
+/* Validate the feedback data from device */
+static void mrvl_pkt_complete(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+	u8 buf[MRVL_FW_HDR_LEN];
+	u16 lhs, rhs;
+
+	memcpy(buf, skb->data, skb->len);
+
+	lhs = le16_to_cpu(*((__le16 *)(&buf[1])));
+	rhs = le16_to_cpu(*((__le16 *)(&buf[3])));
+	if ((lhs ^ rhs) == 0xffff) {
+		mrvl_send_ack(hu, MRVL_ACK);
+		fw_data->wait_fw = 1;
+		fw_data->next_len = lhs;
+		/*firmware download is done, send the last ack*/
+		if (!lhs)
+			fw_data->last_ack = 1;
+
+		if (unlikely(fw_data->expected_ack == MRVL_HDR_CHIP_VER)) {
+			fw_data->chip_id = *((u8 *)(&buf[1]));
+			fw_data->chip_rev = *((u8 *)(&buf[2]));
+		}
+		wake_up_interruptible(&fw_data->init_wait_q);
+	} else {
+		mrvl_send_ack(hu, MRVL_NAK);
+	}
+}
+
+/* This function receives data from the uart device during firmware download.
+ * Driver expects 5 bytes of data as per the protocal in the below format:
+ * <HEADER><BYTE_1><BYTE_2><BYTE_3><BYTE_4>
+ * BYTE_3 and BYTE_4 are compliment of BYTE_1 an BYTE_2. Data can come in chunks
+ * of any length. If length received is < 5, accumulate the data in an array,
+ * until we have a sequence of 5 bytes, starting with the expected HEADER. If
+ * the length received is > 5  bytes, then get the first 5 bytes, starting with
+ * the HEADER and process the same, ignoring the rest of the bytes as per the
+ * protocal.
+ */
+static struct sk_buff *mrvl_process_fw_data(struct hci_uart *hu,
+					    struct sk_buff *skb,
+					    u8 *buf, int count)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+	int i = 0, len;
+
+	if (!skb) {
+		while (buf[i] != fw_data->expected_ack && i < count)
+			i++;
+		if (i == count)
+			return ERR_PTR(-EILSEQ);
+
+		skb = bt_skb_alloc(MRVL_FW_HDR_LEN, GFP_KERNEL);
+	}
+
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	len = count - i;
+	memcpy(skb_put(skb, len), &buf[i], len);
+
+	if (skb->len == MRVL_FW_HDR_LEN) {
+		mrvl_pkt_complete(hu, skb);
+		kfree_skb(skb);
+		skb = NULL;
+	}
+
+	return skb;
+}
+
+/* Receive data */
+static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags)) {
+		mrvl->fwdata->skb = mrvl_process_fw_data(hu, mrvl->fwdata->skb,
+							 (u8 *)data, count);
+		if (IS_ERR(mrvl->fwdata->skb)) {
+			int err = PTR_ERR(mrvl->fwdata->skb);
+
+			bt_dev_err(hu->hdev,
+				   "Receive firmware data failed (%d)", err);
+			mrvl->fwdata->skb = NULL;
+			return err;
+		}
+		return 0;
+	}
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
+				   mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts));
+	if (IS_ERR(mrvl->rx_skb)) {
+		int err = PTR_ERR(mrvl->rx_skb);
+
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		mrvl->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	return skb_dequeue(&mrvl->txq);
+}
+
+static int mrvl_init_fw_data(struct hci_uart *hu)
+{
+	struct fw_data *fwdata;
+	struct mrvl_data *mrvl = hu->priv;
+
+	fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL);
+
+	if (!fwdata)
+		return -ENOMEM;
+
+	mrvl->fwdata = fwdata;
+	init_waitqueue_head(&fwdata->init_wait_q);
+
+	return 0;
+}
+
+/* Wait for the header from device */
+static int mrvl_wait_for_hdr(struct hci_uart *hu, u8 header)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	fw_data->expected_ack = header;
+	fw_data->wait_fw = 0;
+
+	if (!wait_event_interruptible_timeout(fw_data->init_wait_q,
+					      fw_data->wait_fw,
+					((MRVL_WAIT_TIMEOUT) * HZ / 1000))) {
+		bt_dev_err(hu->hdev, "TIMEOUT, waiting for:0x%x",
+			   fw_data->expected_ack);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Send bytes to device */
+static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	skb_queue_head(&mrvl->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1)
+		return -1;
+
+	return 0;
+}
+
+static struct sk_buff *mrvl_alloc_skb(struct hci_dev *hdev)
+{
+	struct sk_buff *skb = NULL;
+
+	skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_KERNEL);
+	if (!skb)
+		bt_dev_err(hdev, "cannot allocate memory for skb");
+	else
+		skb->dev = (void *)hdev;
+
+	return skb;
+}
+
+/* Download firmware to the device */
+static int mrvl_dnld_fw(struct hci_uart *hu, const char *file_name)
+{
+	struct hci_dev *hdev = hu->hdev;
+	const struct firmware *fw = NULL;
+	struct sk_buff *skb = NULL;
+	int offset = 0;
+	int ret, tx_len;
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	ret = request_firmware(&fw, file_name, &hdev->dev);
+	if (ret < 0) {
+		bt_dev_err(hu->hdev, "request_firmware() failed");
+		return -1;
+	}
+
+	bt_dev_info(hu->hdev, "Downloading FW (%d bytes)", (u16)fw->size);
+
+	fw_data->last_ack = 0;
+
+	do {
+		if ((offset >= fw->size) || (fw_data->last_ack))
+			break;
+		tx_len = fw_data->next_len;
+		if ((fw->size - offset) < tx_len)
+			tx_len = fw->size - offset;
+
+		skb = mrvl_alloc_skb(hdev);
+		if (!skb) {
+			ret = -1;
+			goto done;
+		}
+
+		memcpy(skb->data, &fw->data[offset], tx_len);
+		skb_put(skb, tx_len);
+		if (mrvl_send_data(hu, skb) != 0) {
+			bt_dev_err(hu->hdev, "fail to download firmware");
+			ret = -1;
+			goto done;
+		}
+		offset += tx_len;
+	} while (1);
+
+	bt_dev_info(hu->hdev, "downloaded %d byte firmware", offset);
+done:
+	release_firmware(fw);
+
+	return ret;
+}
+
+/* Set the baud rate */
+static int mrvl_set_dev_baud(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00 };
+	int err;
+
+	skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, sizeof(baud_param),
+			     baud_param, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Set device baudrate failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+/* Reset device */
+static int mrvl_reset(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Reset device failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int mrvl_set_baud(struct hci_uart *hu)
+{
+	int err;
+
+	hci_uart_set_baudrate(hu, 115200);
+	hci_uart_set_flow_control(hu, false);
+
+	err = mrvl_reset(hu);
+	if (err)
+		goto set_term_baud;
+	else
+		goto set_dev_baud;
+
+set_dev_baud:
+	err = mrvl_set_dev_baud(hu);
+	if (err)
+		return -1;
+
+set_term_baud:
+	hci_uart_set_baudrate(hu, 3000000);
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static int mrvl_get_fw_name(struct hci_uart *hu, char *fw_name)
+{
+	int ret;
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER);
+	if (ret) {
+		ret = -1;
+		bt_dev_err(hu->hdev, "Could not read chip id and revision");
+		goto fail;
+	}
+
+	bt_dev_dbg(hu->hdev, "chip_id=0x%x, chip_rev=0x%x",
+		   fw_data->chip_id, fw_data->chip_rev);
+
+	if (fw_data->chip_id == 0x50) {
+		memcpy(fw_name, MRVL_8997_FW_NAME, sizeof(MRVL_8997_FW_NAME));
+	} else {
+		ret = -1;
+		bt_dev_err(hu->hdev, "Invalid chip id");
+	}
+fail:
+	return ret;
+}
+
+/* Download helper and firmare to device */
+static int hci_uart_dnld_fw(struct hci_uart *hu)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios new_termios;
+	struct ktermios old_termios;
+	struct mrvl_data *mrvl = hu->priv;
+	char fw_name[128];
+	int ret;
+
+	old_termios = tty->termios;
+
+	if (get_cts(hu)) {
+		bt_dev_info(hu->hdev, "fw is running");
+		clear_bit(HCI_UART_DNLD_FW, &mrvl->flags);
+		goto set_baud;
+	}
+
+	hci_uart_set_baudrate(hu, 115200);
+	hci_uart_set_flow_control(hu, true);
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_dnld_fw(hu, MRVL_HELPER_NAME);
+	if (ret)
+		goto fail;
+
+	msleep(MRVL_DNLD_DELAY);
+
+	hci_uart_set_baudrate(hu, 3000000);
+	hci_uart_set_flow_control(hu, false);
+
+	ret = mrvl_get_fw_name(hu, fw_name);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_dnld_fw(hu, fw_name);
+	if (ret)
+		goto fail;
+
+	msleep(MRVL_DNLD_DELAY);
+	/* restore uart settings */
+	new_termios = tty->termios;
+	tty->termios.c_cflag = old_termios.c_cflag;
+	tty_set_termios(tty, &new_termios);
+	clear_bit(HCI_UART_DNLD_FW, &mrvl->flags);
+
+set_baud:
+	ret = mrvl_set_baud(hu);
+	if (ret)
+		goto fail;
+
+	msleep(MRVL_DNLD_DELAY);
+
+	return ret;
+fail:
+	/* restore uart settings */
+	new_termios = tty->termios;
+	tty->termios.c_cflag = old_termios.c_cflag;
+	tty_set_termios(tty, &new_termios);
+	clear_bit(HCI_UART_DNLD_FW, &mrvl->flags);
+
+	return ret;
+}
+
+static int mrvl_setup(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	mrvl_init_fw_data(hu);
+	set_bit(HCI_UART_DNLD_FW, &mrvl->flags);
+
+	return hci_uart_dnld_fw(hu);
+}
+
+static const struct hci_uart_proto mrvlp = {
+	.id		= HCI_UART_MRVL,
+	.name		= "MRVL",
+	.open		= mrvl_open,
+	.close		= mrvl_close,
+	.recv		= mrvl_recv,
+	.enqueue	= mrvl_enqueue,
+	.dequeue	= mrvl_dequeue,
+	.flush		= mrvl_flush,
+	.setup		= mrvl_setup,
+};
+
+int __init mrvl_init(void)
+{
+	return hci_uart_register_proto(&mrvlp);
+}
+
+int __exit mrvl_deinit(void)
+{
+	return hci_uart_unregister_proto(&mrvlp);
+}
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 4814ff0..8b1f744 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
 #define HCIUARTGETFLAGS		_IOR('U', 204, int)
 
 /* UART protocols */
-#define HCI_UART_MAX_PROTO	10
+#define HCI_UART_MAX_PROTO	11
 
 #define HCI_UART_H4	0
 #define HCI_UART_BCSP	1
@@ -47,6 +47,7 @@
 #define HCI_UART_BCM	7
 #define HCI_UART_QCA	8
 #define HCI_UART_AG6XX	9
+#define HCI_UART_MRVL	10
 
 #define HCI_UART_RAW_DEVICE	0
 #define HCI_UART_RESET_ON_INIT	1
@@ -188,3 +189,8 @@ int qca_deinit(void);
 int ag6xx_init(void);
 int ag6xx_deinit(void);
 #endif
+
+#ifdef CONFIG_BT_HCIUART_MRVL
+int mrvl_init(void);
+int mrvl_deinit(void);
+#endif
-- 
1.9.1

Powered by blists - more mailing lists