lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459862860-9775-17-git-send-email-guodong.xu@linaro.org>
Date:	Tue,  5 Apr 2016 21:27:40 +0800
From:	Guodong Xu <guodong.xu@...aro.org>
To:	xuwei5@...ilicon.com, mark.rutland@....com, robh@...nel.org,
	grant.likely@...retlab.ca, linus.walleij@...aro.org,
	arnd.bergmann@...aro.org
Cc:	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	kong.kongxinwei@...ilicon.com, Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v3 16/16] arm64: dts: add wifi nodes support for hi6220-hikey

Add wifi nodes support for hi6220-hikey

Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index a6dffa8..78ce994 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -48,6 +48,7 @@
 		i2c0: i2c@...00000 {
 			status = "ok";
 		};
+
 		i2c1: i2c@...01000 {
 			status = "ok";
 		};
@@ -63,6 +64,35 @@
 		uart3: uart@...13000 {
 			status = "ok";
 		};
+
+		dwmmc_2: dwmmc2@...3f000 {
+			ti,non-removable;
+			non-removable;
+			/* WL_EN */
+			vmmc-supply = <&wlan_en_reg>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			wlcore: wlcore@2 {
+				compatible = "ti,wl1835";
+				reg = <2>;	/* sdio func num */
+				/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+				interrupt-parent = <&gpio1>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		wlan_en_reg: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "wlan-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			/* WLAN_EN GPIO */
+			gpio = <&gpio0 5 0>;
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
 	};
 
 	leds {
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ