[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1459881004-13992-1-git-send-email-danielwa@cisco.com>
Date: Tue, 5 Apr 2016 11:30:03 -0700
From: Daniel Walker <danielwa@...co.com>
To: dima.ruinskiy@...el.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Shannon Nelson <shannon.nelson@...el.com>,
Carolyn Wyborny <carolyn.wyborny@...el.com>,
Don Skidmore <donald.c.skidmore@...el.com>,
Bruce Allan <bruce.w.allan@...el.com>,
John Ronciak <john.ronciak@...el.com>,
Mitch Williams <mitch.a.williams@...el.com>
Cc: Steve Shih <sshih@...co.com>, xe-kernel@...ernal.cisco.com,
Daniel Walker <dwalker@...o99.com>,
intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH -v2] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for non-copper
From: Steve Shih <sshih@...co.com>
This patch fixes the issues for disabling auto-negotiation and forcing
speed and duplex settings for the non-copper media.
For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for
eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
call would not fail with -EOPNOTSUPP.
e1000_set_spd_dplx should not automatically turn autoneg back on for forced
1000 Mbps full duplex settings for non-copper media.
Cc: xe-kernel@...ernal.cisco.com
Cc: Daniel Walker <dwalker@...o99.com>
Signed-off-by: Steve Shih <sshih@...co.com>
---
drivers/net/ethernet/intel/e1000e/ethtool.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 6cab1f3..b6b8290 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
else
ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+ if (hw->phy.media_type != e1000_media_type_copper)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
+
return 0;
}
@@ -236,8 +239,12 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
mac->forced_speed_duplex = ADVERTISE_100_FULL;
break;
case SPEED_1000 + DUPLEX_FULL:
- mac->autoneg = 1;
- adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised =
+ ADVERTISE_1000_FULL;
+ } else
+ mac->forced_speed_duplex = ADVERTISE_1000_FULL;
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
--
2.5.0
Powered by blists - more mailing lists