| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1459944577-6423-2-git-send-email-keguang.zhang@gmail.com>
Date: Wed, 6 Apr 2016 20:09:31 +0800
From: Keguang Zhang <keguang.zhang@...il.com>
To: linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
linux-clk@...r.kernel.org, linux-pm@...r.kernel.org,
dmaengine@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-mtd@...ts.infradead.org
Cc: Ralf Baechle <ralf@...ux-mips.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
Vinod Koul <vinod.koul@...el.com>,
Dan Williams <dan.j.williams@...el.com>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Kelvin Cheung <keguang.zhang@...il.com>
Subject: [PATCH 1/7] clk: Loongson1: Update clocks of Loongson1B
From: Kelvin Cheung <keguang.zhang@...il.com>
- Rename the file to clk-loongson1.c
- Add AC97, DMA and NAND clock
- Update clock names
- Remove superfluous error messages
Signed-off-by: Kelvin Cheung <keguang.zhang@...il.com>
---
drivers/clk/Makefile | 2 +-
drivers/clk/clk-loongson1.c | 163 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/clk-ls1x.c | 162 -------------------------------------------
3 files changed, 164 insertions(+), 163 deletions(-)
create mode 100644 drivers/clk/clk-loongson1.c
delete mode 100644 drivers/clk/clk-ls1x.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 46869d6..5845b2c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
-obj-$(CONFIG_MACH_LOONGSON32) += clk-ls1x.o
+obj-$(CONFIG_MACH_LOONGSON32) += clk-loongson1.o
obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o
diff --git a/drivers/clk/clk-loongson1.c b/drivers/clk/clk-loongson1.c
new file mode 100644
index 0000000..ce2135c
--- /dev/null
+++ b/drivers/clk/clk-loongson1.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2012-2016 Zhang, Keguang <keguang.zhang@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <loongson1.h>
+
+#define OSC (33 * 1000000)
+#define DIV_APB 2
+
+static DEFINE_SPINLOCK(_lock);
+
+static int ls1x_pll_clk_enable(struct clk_hw *hw)
+{
+ return 0;
+}
+
+static void ls1x_pll_clk_disable(struct clk_hw *hw)
+{
+}
+
+static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 pll, rate;
+
+ pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+ rate = 12 + (pll & 0x3f) + (((pll >> 8) & 0x3ff) >> 10);
+ rate *= OSC;
+ rate >>= 1;
+
+ return rate;
+}
+
+static const struct clk_ops ls1x_pll_clk_ops = {
+ .enable = ls1x_pll_clk_enable,
+ .disable = ls1x_pll_clk_disable,
+ .recalc_rate = ls1x_pll_recalc_rate,
+};
+
+static struct clk *__init clk_register_pll(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags)
+{
+ struct clk_hw *hw;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the divider */
+ hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &ls1x_pll_clk_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ hw->init = &init;
+
+ /* register the clock */
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ kfree(hw);
+
+ return clk;
+}
+
+static const char *const cpu_parents[] = { "cpu_clk_div", "osc_33m_clk", };
+static const char *const ahb_parents[] = { "ahb_clk_div", "osc_33m_clk", };
+static const char *const dc_parents[] = { "dc_clk_div", "osc_33m_clk", };
+
+void __init ls1x_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "osc_33m_clk", NULL, CLK_IS_ROOT,
+ OSC);
+ clk_register_clkdev(clk, "osc_33m_clk", NULL);
+
+ /* clock derived from 33 MHz OSC clk */
+ clk = clk_register_pll(NULL, "pll_clk", "osc_33m_clk", 0);
+ clk_register_clkdev(clk, "pll_clk", NULL);
+
+ /* clock derived from PLL clk */
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ CPU CLK
+ * \___ PLL ___ CPU DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "cpu_clk_div", "pll_clk",
+ CLK_GET_RATE_NOCACHE, LS1X_CLK_PLL_DIV,
+ DIV_CPU_SHIFT, DIV_CPU_WIDTH,
+ CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ROUND_CLOSEST, &_lock);
+ clk_register_clkdev(clk, "cpu_clk_div", NULL);
+ clk = clk_register_mux(NULL, "cpu_clk", cpu_parents,
+ ARRAY_SIZE(cpu_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_CPU_SHIFT, BYPASS_CPU_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ DC CLK
+ * \___ PLL ___ DC DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "dc_clk_div", "pll_clk",
+ 0, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+ DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_register_clkdev(clk, "dc_clk_div", NULL);
+ clk = clk_register_mux(NULL, "dc_clk", dc_parents,
+ ARRAY_SIZE(dc_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_DC_SHIFT, BYPASS_DC_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "dc_clk", NULL);
+
+ /* _____
+ * _______________________| |
+ * OSC ___/ | MUX |___ DDR CLK
+ * \___ PLL ___ DDR DIV ___| |
+ * |_____|
+ */
+ clk = clk_register_divider(NULL, "ahb_clk_div", "pll_clk",
+ 0, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+ DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED,
+ &_lock);
+ clk_register_clkdev(clk, "ahb_clk_div", NULL);
+ clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
+ ARRAY_SIZE(ahb_parents),
+ CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
+ BYPASS_DDR_SHIFT, BYPASS_DDR_WIDTH, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+ clk_register_clkdev(clk, "ls1x-dma", NULL);
+ clk_register_clkdev(clk, "stmmaceth", NULL);
+
+ /* clock derived from AHB clk */
+ /* APB clk is always half of the AHB clk */
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
+ DIV_APB);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+ clk_register_clkdev(clk, "ls1x-ac97", NULL);
+ clk_register_clkdev(clk, "ls1x-i2c", NULL);
+ clk_register_clkdev(clk, "ls1x-nand", NULL);
+ clk_register_clkdev(clk, "ls1x-pwmtimer", NULL);
+ clk_register_clkdev(clk, "ls1x-spi", NULL);
+ clk_register_clkdev(clk, "ls1x-wdt", NULL);
+ clk_register_clkdev(clk, "serial8250", NULL);
+}
diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
deleted file mode 100644
index d4c6198..0000000
--- a/drivers/clk/clk-ls1x.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@...il.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-
-#include <loongson1.h>
-
-#define OSC (33 * 1000000)
-#define DIV_APB 2
-
-static DEFINE_SPINLOCK(_lock);
-
-static int ls1x_pll_clk_enable(struct clk_hw *hw)
-{
- return 0;
-}
-
-static void ls1x_pll_clk_disable(struct clk_hw *hw)
-{
-}
-
-static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- u32 pll, rate;
-
- pll = __raw_readl(LS1X_CLK_PLL_FREQ);
- rate = 12 + (pll & 0x3f) + (((pll >> 8) & 0x3ff) >> 10);
- rate *= OSC;
- rate >>= 1;
-
- return rate;
-}
-
-static const struct clk_ops ls1x_pll_clk_ops = {
- .enable = ls1x_pll_clk_enable,
- .disable = ls1x_pll_clk_disable,
- .recalc_rate = ls1x_pll_recalc_rate,
-};
-
-static struct clk *__init clk_register_pll(struct device *dev,
- const char *name,
- const char *parent_name,
- unsigned long flags)
-{
- struct clk_hw *hw;
- struct clk *clk;
- struct clk_init_data init;
-
- /* allocate the divider */
- hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
- if (!hw) {
- pr_err("%s: could not allocate clk_hw\n", __func__);
- return ERR_PTR(-ENOMEM);
- }
-
- init.name = name;
- init.ops = &ls1x_pll_clk_ops;
- init.flags = flags | CLK_IS_BASIC;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
- hw->init = &init;
-
- /* register the clock */
- clk = clk_register(dev, hw);
-
- if (IS_ERR(clk))
- kfree(hw);
-
- return clk;
-}
-
-static const char * const cpu_parents[] = { "cpu_clk_div", "osc_33m_clk", };
-static const char * const ahb_parents[] = { "ahb_clk_div", "osc_33m_clk", };
-static const char * const dc_parents[] = { "dc_clk_div", "osc_33m_clk", };
-
-void __init ls1x_clk_init(void)
-{
- struct clk *clk;
-
- clk = clk_register_fixed_rate(NULL, "osc_33m_clk", NULL, CLK_IS_ROOT,
- OSC);
- clk_register_clkdev(clk, "osc_33m_clk", NULL);
-
- /* clock derived from 33 MHz OSC clk */
- clk = clk_register_pll(NULL, "pll_clk", "osc_33m_clk", 0);
- clk_register_clkdev(clk, "pll_clk", NULL);
-
- /* clock derived from PLL clk */
- /* _____
- * _______________________| |
- * OSC ___/ | MUX |___ CPU CLK
- * \___ PLL ___ CPU DIV ___| |
- * |_____|
- */
- clk = clk_register_divider(NULL, "cpu_clk_div", "pll_clk",
- CLK_GET_RATE_NOCACHE, LS1X_CLK_PLL_DIV,
- DIV_CPU_SHIFT, DIV_CPU_WIDTH,
- CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ROUND_CLOSEST, &_lock);
- clk_register_clkdev(clk, "cpu_clk_div", NULL);
- clk = clk_register_mux(NULL, "cpu_clk", cpu_parents,
- ARRAY_SIZE(cpu_parents),
- CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
- BYPASS_CPU_SHIFT, BYPASS_CPU_WIDTH, 0, &_lock);
- clk_register_clkdev(clk, "cpu_clk", NULL);
-
- /* _____
- * _______________________| |
- * OSC ___/ | MUX |___ DC CLK
- * \___ PLL ___ DC DIV ___| |
- * |_____|
- */
- clk = clk_register_divider(NULL, "dc_clk_div", "pll_clk",
- 0, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
- DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
- clk_register_clkdev(clk, "dc_clk_div", NULL);
- clk = clk_register_mux(NULL, "dc_clk", dc_parents,
- ARRAY_SIZE(dc_parents),
- CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
- BYPASS_DC_SHIFT, BYPASS_DC_WIDTH, 0, &_lock);
- clk_register_clkdev(clk, "dc_clk", NULL);
-
- /* _____
- * _______________________| |
- * OSC ___/ | MUX |___ DDR CLK
- * \___ PLL ___ DDR DIV ___| |
- * |_____|
- */
- clk = clk_register_divider(NULL, "ahb_clk_div", "pll_clk",
- 0, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
- DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED,
- &_lock);
- clk_register_clkdev(clk, "ahb_clk_div", NULL);
- clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
- ARRAY_SIZE(ahb_parents),
- CLK_SET_RATE_NO_REPARENT, LS1X_CLK_PLL_DIV,
- BYPASS_DDR_SHIFT, BYPASS_DDR_WIDTH, 0, &_lock);
- clk_register_clkdev(clk, "ahb_clk", NULL);
- clk_register_clkdev(clk, "stmmaceth", NULL);
-
- /* clock derived from AHB clk */
- /* APB clk is always half of the AHB clk */
- clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
- DIV_APB);
- clk_register_clkdev(clk, "apb_clk", NULL);
- clk_register_clkdev(clk, "ls1x_i2c", NULL);
- clk_register_clkdev(clk, "ls1x_pwmtimer", NULL);
- clk_register_clkdev(clk, "ls1x_spi", NULL);
- clk_register_clkdev(clk, "ls1x_wdt", NULL);
- clk_register_clkdev(clk, "serial8250", NULL);
-}
--
1.9.1
Powered by blists - more mailing lists