[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1460023715-19332-11-git-send-email-rogerq@ti.com>
Date: Thu, 7 Apr 2016 13:08:28 +0300
From: Roger Quadros <rogerq@...com>
To: <tony@...mide.com>, <computersforpeace@...il.com>,
<boris.brezillon@...e-electrons.com>
CC: <dwmw2@...radead.org>, <ezequiel@...guardiasur.com.ar>,
<javier@...hile0.org>, <fcooper@...com>, <nsekhar@...com>,
<linux-mtd@...ts.infradead.org>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Roger Quadros <rogerq@...com>
Subject: [PATCH v6 10/17] mtd: nand: omap: Update DT binding documentation
Add compatible id and interrupts. The NAND interrupts are
provided by the GPMC controller node.
Signed-off-by: Roger Quadros <rogerq@...com>
Acked-by: Rob Herring <robh@...nel.org>
Acked-by: Brian Norris <computersforpeace@...il.com>
---
Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index fb733c4..ff3215d2 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt
Required properties:
- - reg: The CS line the peripheral is connected to
+ - compatible: "ti,omap2-nand"
+ - reg: range id (CS number), base offset and length of the
+ NAND I/O space
+ - interrupt-parent: must point to gpmc node
+ - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
Optional properties:
@@ -55,17 +59,22 @@ Example for an AM33xx board:
gpmc: gpmc@...00000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
- reg = <0x50000000 0x1000000>;
+ reg = <0x50000000 0x36c>;
interrupts = <100>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x08000000 0x2000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */
elm_id = <&elm>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
--
2.5.0
Powered by blists - more mailing lists