linux-kernel - [RFC 3/3] mfd: dt-bindings: Add RK818 device tree bindings document

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1460108861-32818-4-git-send-email-w.egorov@phytec.de>
Date:	Fri, 8 Apr 2016 11:47:41 +0200
From:	Wadim Egorov <w.egorov@...tec.de>
To:	linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
	devicetree@...r.kernel.org
Cc:	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	lee.jones@...aro.org, lgirdwood@...il.com, broonie@...nel.org,
	dianders@...omium.org, zyw@...k-chips.com
Subject: [RFC 3/3] mfd: dt-bindings: Add RK818 device tree bindings document

Add device tree bindings documentation for rockchip's RK818 pmic.

Signed-off-by: Wadim Egorov <w.egorov@...tec.de>
---
 Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 4ca6aab..8cceb07 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8xx Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818
 
 Required properties:
-- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -13,6 +17,8 @@ Optional properties:
   default output clock name
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
+
+Optional rk808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
 - vcc3-supply:  The input supply for DCDC_REG3
@@ -29,7 +35,20 @@ Optional properties:
   the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
   very quickly with no slow ramp time.
 
-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional rk818 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply:  The input supply for HDMI_SWITCH
+- usb-supply:   The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8xx to be instantiated shall be
 listed in a child node named 'regulators'. Each regulator is represented
 by a child node of the 'regulators' node.
 
@@ -48,6 +67,18 @@ number as described in RK808 datasheet.
 	- SWITCH_REGn
 		- valid values for n are 1 to 2
 
+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 9.
+	- SWITCH_REG
+	- HDMI_SWITCH
+	- OTG_SWITCH
+
 Standard regulator bindings are used inside regulator subnodes. Check
   Documentation/devicetree/bindings/regulator/regulator.txt
 for more details
-- 
1.9.1