linux-kernel - [PATCH v3 02/13] USB: ch341: add LCR register definitions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1460331833-19836-3-git-send-email-greg@chown.ath.cx>
Date:	Mon, 11 Apr 2016 01:43:42 +0200
From:	Grigori Goronzy <greg@...wn.ath.cx>
To:	Johan Hovold <johan@...nel.org>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Grigori Goronzy <greg@...wn.ath.cx>
Subject: [PATCH v3 02/13] USB: ch341: add LCR register definitions

BREAK2 seems to be a misnomer, the register configures various aspects
of the UART configuration.

Signed-off-by: Grigori Goronzy <greg@...wn.ath.cx>
---
 drivers/usb/serial/ch341.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 63df8ce..1ab4384 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -64,10 +64,19 @@
 #define CH341_REQ_WRITE_REG    0x9A
 #define CH341_REQ_READ_REG     0x95
 #define CH341_REG_BREAK1       0x05
-#define CH341_REG_BREAK2       0x18
+#define CH341_REG_LCR          0x18
 #define CH341_NBREAK_BITS_REG1 0x01
-#define CH341_NBREAK_BITS_REG2 0x40
 
+#define CH341_LCR_ENABLE_RX    0x80
+#define CH341_LCR_ENABLE_TX    0x40
+#define CH341_LCR_MARK_SPACE   0x20
+#define CH341_LCR_PAR_EVEN     0x10
+#define CH341_LCR_ENABLE_PAR   0x08
+#define CH341_LCR_STOP_BITS_2  0x04
+#define CH341_LCR_CS8          0x03
+#define CH341_LCR_CS7          0x02
+#define CH341_LCR_CS6          0x01
+#define CH341_LCR_CS5          0x00
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
@@ -370,7 +379,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 {
 	const uint16_t ch341_break_reg =
-		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_LCR << 8);
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;
@@ -392,11 +401,11 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	if (break_state != 0) {
 		dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
 		break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
-		break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
+		break_reg[1] &= ~CH341_LCR_ENABLE_TX;
 	} else {
 		dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
 		break_reg[0] |= CH341_NBREAK_BITS_REG1;
-		break_reg[1] |= CH341_NBREAK_BITS_REG2;
+		break_reg[1] |= CH341_LCR_ENABLE_TX;
 	}
 	dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
 		__func__, break_reg[0], break_reg[1]);
-- 
1.9.1