[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1460387640.git.jglauber@cavium.com>
Date: Mon, 11 Apr 2016 17:28:31 +0200
From: Jan Glauber <jglauber@...ium.com>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
David Daney <ddaney@...iumnetworks.com>,
Jan Glauber <jglauber@...ium.com>
Subject: [PATCH v6 00/19] i2c-octeon and i2c-thunderx drivers
Hi Wolfram,
in the meantime I've converted the octeon driver to use the i2c
recovery framework. I thing this makes the code easier to follow.
I've also cleaned up some other aspects, like the register access
and fixed some bugs I found while going over the code again.
This series for the Octeon i2c driver is an attempt to upstream some
bug fixes and features that accumulated for some time.
On top of the Octeon changes a i2c driver for the ThunderX SOC is
added which uses the same functional block as the Octeon driver.
Patches are on top of 4.6-rc3 and were tested on OCTEON, OCTEON-78
and ThunderX.
Changes to v5:
- Switch to i2c recovery framework
- Clean-up register access, introduce new helper functions
- Fixed ready bit check in combined write
- Fixed IFLG clear in hlc_enable
- Removed complicated last phase logic, not needed when we send
START for every message part
Changes to v4:
- Splitted the High-Level Controller patch into several patches
- Reworded some commit messages
Changes to v3:
- Added more functionality flags for SMBUS
- Removed both module parameters
- Make xfer return also other errors than EGAIN
- Return EPROTO on invalid SMBUS block length
- Use devm_ioremap_resource
- Added rename-only patch
- Removed kerneldoc patch from series
- Improved defines
Changes to v2:
- Split clenaup patch into several patches
- Strictly moved functional changes to later patches
- Fixed do-while checkpatch errors
- Moved defines to the patches that use them
- Use BIT_ULL macro
- Split ThunderX patch into 2 patches
Changes to v1:
- Fixed compile error on x86_64
- Disabled thunderx driver on MIPS
- Re-ordered some thunderx probe functions for readability
- Fix missing of_irq.h and i2c-smbus.h includes
- Use IS_ENABLED for CONFIG options
Jan
-------------------------------------------------
David Daney (3):
i2c: octeon: Enable High-Level Controller
i2c: octeon: Add support for cn78xx chips
i2c: octeon: Add workaround for broken irqs on CN3860
Jan Glauber (14):
i2c: octeon: Increase retry default and use fixed timeout value
i2c: octeon: Move set-clock and init-lowlevel upward
i2c: octeon: Rename [read|write]_sw to reg_[read|write]
i2c: octeon: Introduce helper functions for register access
i2c: octeon: Remove superfluous check in octeon_i2c_test_iflg
i2c: octeon: Improve error status checking
i2c: octeon: Use i2c recovery framework
dt-bindings: i2c: Add Octeon cn78xx TWSI
i2c: octeon: Move read function before write
i2c: octeon: Rename driver to prepare for split
i2c: octeon: Split the driver into two parts
i2c: thunderx: Add i2c driver for ThunderX SOC
i2c: octeon,thunderx: Move register offsets to struct
i2c: thunderx: Add smbus alert support
Peter Swain (2):
i2c: octeon: Flush TWSI writes with readback
i2c: octeon: Faster operation when IFLG signals late
.../devicetree/bindings/i2c/i2c-octeon.txt | 6 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 3 +
drivers/i2c/busses/i2c-cavium.c | 805 +++++++++++++++++++++
drivers/i2c/busses/i2c-cavium.h | 218 ++++++
drivers/i2c/busses/i2c-octeon-core.c | 288 ++++++++
drivers/i2c/busses/i2c-octeon.c | 600 ---------------
drivers/i2c/busses/i2c-thunderx-core.c | 308 ++++++++
8 files changed, 1638 insertions(+), 600 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-cavium.c
create mode 100644 drivers/i2c/busses/i2c-cavium.h
create mode 100644 drivers/i2c/busses/i2c-octeon-core.c
delete mode 100644 drivers/i2c/busses/i2c-octeon.c
create mode 100644 drivers/i2c/busses/i2c-thunderx-core.c
--
1.9.1
Powered by blists - more mailing lists