Message-Id: <1460405379-25294-1-git-send-email-Waiman.Long@hpe.com>
Date:	Mon, 11 Apr 2016 16:09:39 -0400
From:	Waiman Long <Waiman.Long@....com>
To:	Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>,
	"H. Peter Anvin" <hpa@...or.com>, Jonathan Corbet <corbet@....net>
Cc:	linux-kernel@...r.kernel.org, linux-doc@...nel.org, x86@...nel.org,
	Jiang Liu <jiang.liu@...ux.intel.com>,
	Borislav Petkov <bp@...e.de>,
	Andy Lutomirski <luto@...nel.org>,
	Scott J Norton <scott.norton@....com>,
	Douglas Hatch <doug.hatch@....com>,
	Randy Wright <rwright@....com>,
	Waiman Long <Waiman.Long@....com>
Subject: [PATCH v3] x86/hpet: Reduce HPET counter read contention

On a large system with many CPUs, using HPET as the clock source can
have a significant impact on the overall system performance because
of the following reasons:
 1) There is a single HPET counter shared by all the CPUs.
 2) HPET counter reading is a very slow operation.

Using HPET as the default clock source may happen when, for example,
the TSC clock calibration exceeds the allowable tolerance. Something
the performance slowdown can be so severe that the system may crash
because of a NMI watchdog soft lockup, for example.

This patch attempts to reduce HPET read contention by using the fact
that if more than one CPUs are trying to access HPET at the same time,
it will be more efficient if one CPU in the group reads the HPET
counter and shares it with the rest of the group instead of each
group member reads the HPET counter individually.

This is done by using a combination word with a sequence number and
a bit lock. The CPU that gets the bit lock will be responsible for
reading the HPET counter and update the sequence number. The others
will monitor the change in sequence number and grab the HPET counter
accordingly. This change is enabled on SMP configuration.

On a 4-socket Haswell-EX box with 72 cores (HT off), running the
AIM7 compute workload (1500 users) on a 4.6-rc1 kernel (HZ=1000)
with and without the patch has the following performance numbers
(with HPET or TSC as clock source):

TSC		= 646515 jobs/min
HPET w/o patch	= 566708 jobs/min
HPET with patch	= 638791 jobs/min

The perf profile showed a reduction of the %CPU time consumed by
read_hpet from 4.99% without patch to 1.41% with patch.

On a 16-socket IvyBridge-EX system with 240 cores (HT on), on the
other hand, the performance numbers of the same benchmark were:

TSC		= 3145329 jobs/min
HPET w/o patch	= 1108537 jobs/min
HPET with patch	= 3019934 jobs/min

The corresponding perf profile showed a drop of CPU consumption of
the read_hpet function from more than 34% to just 2.96%.

Signed-off-by: Waiman Long <Waiman.Long@....com>
---
 v2->v3:
  - Make the hpet optimization the default for SMP configuration. So
    no documentation change is needed.
  - Remove threshold checking code as it should not be necessary and
    can be potentially unsafe.

 v1->v2:
  - Reduce the CPU threshold to 32.
  - Add a kernel parameter to explicitly enable or disable hpet
    optimization.
  - Change hpet_save.hpet type to u32 to make sure that read & write
    is atomic on i386.

 arch/x86/kernel/hpet.c |   83 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 83 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a1f0e4a..ff1f140 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -759,12 +759,95 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 #endif
 
 /*
+ * Reading the HPET counter is a very slow operation. If a large number of
+ * CPUs are trying to access the HPET counter simultaneously, it can cause
+ * massive delay and slow down system performance dramatically. This may
+ * happen when HPET is the default clock source instead of TSC. For a
+ * really large system with hundreds of CPUs, the slowdown may be so
+ * severe that it may actually crash the system because of a NMI watchdog
+ * soft lockup, for example.
+ *
+ * If multiple CPUs are trying to access the HPET counter at the same time,
+ * we don't actually need to read the counter multiple times. Instead, the
+ * other CPUs can use the counter value read by the first CPU in the group.
+ *
+ * A sequence number whose lsb is a lock bit is used to control which CPU
+ * has the right to read the HPET counter directly and which CPUs are going
+ * to get the indirect value read by the lock holder. For the later group,
+ * if the sequence number differs from the expected locked value, they
+ * can assume that the saved HPET value is up-to-date and return it.
+ */
+static struct {
+	/* Sequence number + bit lock */
+	int seq ____cacheline_aligned_in_smp;
+
+	/* Current HPET value		*/
+	u32 hpet ____cacheline_aligned_in_smp;
+} hpet_save;
+#define HPET_SEQ_LOCKED(seq)	((seq) & 1)	/* Odd == locked */
+
+/*
  * Clock source related code
  */
+#ifdef CONFIG_SMP
+static cycle_t read_hpet(struct clocksource *cs)
+{
+	int seq;
+
+	seq = READ_ONCE(hpet_save.seq);
+	if (!HPET_SEQ_LOCKED(seq)) {
+		int old, new = seq + 1;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		/*
+		 * Set the lock bit (lsb) to get the right to read HPET
+		 * counter directly. If successful, read the counter, save
+		 * its value, and increment the sequence number. Otherwise,
+		 * increment the sequnce number to the expected locked value
+		 * for comparison later on.
+		 */
+		old = cmpxchg(&hpet_save.seq, seq, new);
+		if (old == seq) {
+			u32 time = hpet_readl(HPET_COUNTER);
+
+			WRITE_ONCE(hpet_save.hpet, time);
+
+			/* Unlock */
+			smp_store_release(&hpet_save.seq, new + 1);
+			local_irq_restore(flags);
+			return (cycle_t)time;
+		}
+		local_irq_restore(flags);
+		seq = new;
+	}
+
+	/*
+	 * Wait until the locked sequence number changes which indicates
+	 * that the saved HPET value is up-to-date.
+	 */
+	while (READ_ONCE(hpet_save.seq) == seq) {
+		/*
+		 * Since reading the HPET is much slower than a single
+		 * cpu_relax() instruction, we use two here in an attempt
+		 * to reduce the amount of cacheline contention in the
+		 * hpet_save.seq cacheline.
+		 */
+		cpu_relax();
+		cpu_relax();
+	}
+
+	return (cycle_t)READ_ONCE(hpet_save.hpet);
+}
+#else /* CONFIG_SMP */
+/*
+ * For UP
+ */
 static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)hpet_readl(HPET_COUNTER);
 }
+#endif /* CONFIG_SMP */
 
 static struct clocksource clocksource_hpet = {
 	.name		= "hpet",
-- 
1.7.1

Powered by blists - more mailing lists