linux-kernel - [RFC PATCH v2 0/2] [media] tvp515p: Proposal for MC input connector support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 12 Apr 2016 18:42:51 -0400
From:	Javier Martinez Canillas <javier@....samsung.com>
To:	linux-kernel@...r.kernel.org
Cc:	Mauro Carvalho Chehab <mchehab@....samsung.com>,
	Shuah Khan <shuahkh@....samsung.com>,
	Sakari Ailus <sakari.ailus@...ux.intel.com>,
	Laurent Pinchart <laurent.pinchart@...asonboard.com>,
	Hans Verkuil <hans.verkuil@...co.com>,
	linux-media@...r.kernel.org,
	Javier Martinez Canillas <javier@....samsung.com>
Subject: [RFC PATCH v2 0/2] [media] tvp515p: Proposal for MC input connector support

Hello,

This is a second version of an RFC patch series that adds MC input connector
support to the tvp5150 driver. The first RFC version was [0].

The patches are RFC because a previous version was merged and later reverted
since the approach was found to be inadequate. So I preferred to post this
approach as RFC to discuss it first.

The main difference with v1 is that a single sink pad is used for the tvp5150
(instead of using a pad per each input pin) as suggested by Mauro and Hans.

The mc_nextgen_test dot output after applying the series can be found at [1]
and the graph png generated using the dot tool is at [2].

I tested these patches on an IGEPv2 by capturing using both Composite inputs.

[0]: https://www.mail-archive.com/linux-media@vger.kernel.org/msg95389.html
[1]: http://hastebin.com/yiduhonome.tex
[2]: http://i.imgur.com/EyFtVtJ.png?1

Best regards,
Javier

Changes in v2:
- Remove from the changelog a mention of devices that multiplex the
  physical RCA connectors to be used for the S-Video Y and C signals
  since it's a special case and it doesn't really work on the IGEPv2.
- Use a single sink pad for the demod and map the connectors as entities
  so the mux is made via links. Suggested by Mauro and Hans.

Javier Martinez Canillas (2):
  [media] tvp5150: Add input connectors DT bindings
  [media] tvp5150: Replace connector support according to DT binding

 .../devicetree/bindings/media/i2c/tvp5150.txt      |  59 ++++++++
 drivers/media/i2c/tvp5150.c                        | 155 +++++++++++++++------
 2 files changed, 170 insertions(+), 44 deletions(-)

-- 
2.5.5