[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1460453642-5809-9-git-send-email-srinivas.kandagatla@linaro.org>
Date: Tue, 12 Apr 2016 10:33:57 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andy Gross <andy.gross@...aro.org>, linux-arm-msm@...r.kernel.org
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-soc@...r.kernel.org,
srinivas.kandagatla@...aro.org
Subject: [PATCH v2 08/13] ARM: dts: db600c: add pcie support
This patch adds pcie and regulators required to get on board ATL1C
ethernet working.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
.../boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 12 +++++++++++
arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 24 ++++++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi
index 7339919..0610f00 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi
@@ -6,4 +6,16 @@
bias-disable;
};
};
+
+ pcie_pins: pcie-pinmux {
+ mux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+ conf {
+ pins = "gpio27";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
index 2c563df..4f2218c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
@@ -21,6 +21,16 @@
regulator-type = "voltage";
regulator-boot-on;
};
+
+ /* on board fixed 3.3v supply */
+ vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
};
soc {
@@ -109,6 +119,10 @@
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
+
+ lvs6 {
+ bias-pull-down;
+ };
};
};
@@ -135,6 +149,16 @@
};
};
+ pci@...00000 {
+ status = "okay";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&vcc3v3>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+ perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+ };
+
/* OTG */
phy@...00000 {
status = "okay";
--
2.5.0
Powered by blists - more mailing lists