linux-kernel - [PATCH 1/5] regulator: st-flashss: Add DT binding documentation for flashss regulator.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1460474204-5351-2-git-send-email-peter.griffin@linaro.org>
Date:	Tue, 12 Apr 2016 16:16:40 +0100
From:	Peter Griffin <peter.griffin@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	broonie@...nel.org, lgirdwood@...il.com,
	srinivas.kandagatla@...il.com, maxime.coquelin@...com,
	patrice.chotard@...com
Cc:	peter.griffin@...aro.org, lee.jones@...aro.org,
	devicetree@...r.kernel.org
Subject: [PATCH 1/5] regulator: st-flashss: Add DT binding documentation for flashss regulator.

This patch adds the DT doc for the flashss regulator driver which is
found in stih407 based silicon.

Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
---
 .../devicetree/bindings/regulator/st-flashss.txt   | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/st-flashss.txt

diff --git a/Documentation/devicetree/bindings/regulator/st-flashss.txt b/Documentation/devicetree/bindings/regulator/st-flashss.txt
new file mode 100644
index 0000000..04324d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st-flashss.txt
@@ -0,0 +1,43 @@
+ST Voltage regulator for FlashSS vsense
+
+This documents the voltage regulator driver which manages the vsense inside the ST flash
+sub-system that is used for configuring MMC, NAND, SPI voltages.
+
+Required properties:
+- compatible:		Can be "st,vqmmc", "st,vnand" or "st,vspi" because it is shared
+			among these devices inside the ST FlashSS.
+- regulator-name:	Regulator name.
+- reg:			The vsense top config base address in the flashSS hardware.
+
+Any property defined as part of the core regulator binding, in
+Documentation/devicetree/bindings/regulator/regulator.txt can also be used.
+
+Example:
+
+vqmmc_reg: voltage-regulator {
+	compatible = "st,vqmmc";
+	regulator-name = "vqmmc0";
+	/* Control register for the VSENSE Module */
+	reg = <0x9061004 0x4>;
+	status = "disabled";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+mmc0: sdhci@...60000 {
+	compatible = "st,sdhci-stih407", "st,sdhci";
+	status = "disabled";
+	reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+	reg-names = "mmc", "top-mmc-delay";
+	interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+	interrupt-names = "mmcirq";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0>;
+	clock-names = "mmc";
+	clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+	bus-width = <8>;
+	non-removable;
+	vqmmc-supply = <&vqmmc_reg>;
+};
+
-- 
1.9.1