| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1460562827-30990-1-git-send-email-boris.brezillon@free-electrons.com>
Date: Wed, 13 Apr 2016 17:53:47 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>
Cc: linux-arm-kernel@...ts.infradead.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Wenyou Yang <wenyou.yang@...el.com>,
Josh Wu <rainyfeeling@...look.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v6 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate
The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
drivers/mtd/nand/atmel_nand.c | 50 +++++++++++++++++++++++++++----------------
1 file changed, 31 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 5e716f2..b132c8f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -833,13 +833,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
+ struct mtd_oob_region oobregion;
+
/* Bit flip in OOB area */
tmp = sector_num * nand_chip->ecc.bytes
+ (byte_pos - sector_size);
err_byte = ecc[tmp];
ecc[tmp] ^= (1 << bit_pos);
- pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pos = tmp + oobregion.offset;
dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
@@ -931,7 +934,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
struct atmel_nand_host *host = nand_get_controller_data(chip);
int eccsize = chip->ecc.size * chip->ecc.steps;
uint8_t *oob = chip->oob_poi;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t stat;
unsigned long end_time;
int bitflips = 0;
@@ -953,7 +955,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
stat = pmecc_readl_relaxed(host->ecc, ISR);
if (stat != 0) {
- bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+ struct mtd_oob_region oobregion;
+
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ bitflips = pmecc_correction(mtd, stat, buf,
+ &oob[oobregion.offset]);
if (bitflips < 0)
/* uncorrectable errors */
return 0;
@@ -967,8 +973,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
int page)
{
struct atmel_nand_host *host = nand_get_controller_data(chip);
- uint32_t *eccpos = chip->ecc.layout->eccpos;
- int i, j;
+ struct mtd_oob_region oobregion = { };
+ int i, j, section = 0;
unsigned long end_time;
if (!host->nfc || !host->nfc->write_by_sram) {
@@ -987,11 +993,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
for (i = 0; i < chip->ecc.steps; i++) {
for (j = 0; j < chip->ecc.bytes; j++) {
- int pos;
+ if (!oobregion.length)
+ mtd_ooblayout_ecc(mtd, section, &oobregion);
- pos = i * chip->ecc.bytes + j;
- chip->oob_poi[eccpos[pos]] =
+ chip->oob_poi[oobregion.offset] =
pmecc_readb_ecc_relaxed(host->ecc, i, j);
+ oobregion.length--;
+ oobregion.offset++;
+ section++;
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1005,6 +1014,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
uint32_t val = 0;
struct nand_ecclayout *ecc_layout;
+ struct mtd_oob_region oobregion;
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -1056,9 +1066,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
ecc_layout = nand_chip->ecc.layout;
pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
- pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pmecc_writel(host->ecc, SADDR, oobregion.offset);
pmecc_writel(host->ecc, EADDR,
- ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ oobregion.offset + ecc_layout->eccbytes - 1);
/* See datasheet about PMECC Clock Control Register */
pmecc_writel(host->ecc, CLK, 2);
pmecc_writel(host->ecc, IDR, 0xff);
@@ -1359,12 +1370,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
uint8_t *ecc_pos;
int stat;
unsigned int max_bitflips = 0;
+ struct mtd_oob_region oobregion = {};
/*
* Errata: ALE is incorrectly wired up to the ECC controller
@@ -1382,19 +1393,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, p, eccsize);
/* move to ECC position if needed */
- if (eccpos[0] != 0) {
- /* This only works on large pages
- * because the ECC controller waits for
- * NAND_CMD_RNDOUTSTART after the
- * NAND_CMD_RNDOUT.
- * anyway, for small pages, the eccpos[0] == 0
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (oobregion.offset != 0) {
+ /*
+ * This only works on large pages because the ECC controller
+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
+ * Anyway, for small pages, the first ECC byte is at offset
+ * 0 in the OOB area.
*/
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
- mtd->writesize + eccpos[0], -1);
+ mtd->writesize + oobregion.offset, -1);
}
/* the ECC controller needs to read the ECC just after the data */
- ecc_pos = oob + eccpos[0];
+ ecc_pos = oob + oobregion.offset;
chip->read_buf(mtd, ecc_pos, eccbytes);
/* check if there's an error */
--
2.5.0
Powered by blists - more mailing lists