| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160414154216.6387.9499.stgit@scvm10.sc.intel.com>
Date: Thu, 14 Apr 2016 08:42:17 -0700
From: Dennis Dalessandro <dennis.dalessandro@...el.com>
To: dledford@...hat.com
Cc: Mike Marciniszyn <mike.marciniszyn@...el.com>,
Dean Luick <dean.luick@...el.com>, linux-rdma@...r.kernel.org,
Mitko Haralanov <mitko.haralanov@...el.com>,
linux-kernel@...r.kernel.org, viro@...iv.linux.org.uk,
linux-fsdevel@...r.kernel.org, torvalds@...ux-foundation.org
Subject: [PATCH 7/7] IB/hfi1: Move eprom to its own device
The eprom writing capability of the driver is currently residing in the
same handler for applications that wish to send/receive packets. This is
better suited as a diagnostic device with its own device file.
Create an eprom device file and add its own IOCTL handling.
Reviewed-by: Mitko Haralanov <mitko.haralanov@...el.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@...el.com>
Reviewed-by: Dean Luick <dean.luick@...el.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@...el.com>
---
drivers/staging/rdma/hfi1/diag.c | 107 ++++++++++++++++++++++++++++++
drivers/staging/rdma/hfi1/eprom.c | 121 ++--------------------------------
drivers/staging/rdma/hfi1/eprom.h | 16 ++++
drivers/staging/rdma/hfi1/file_ops.c | 23 ------
drivers/staging/rdma/hfi1/hfi.h | 8 ++
include/uapi/rdma/hfi/hfi1_user.h | 21 +++---
6 files changed, 146 insertions(+), 150 deletions(-)
diff --git a/drivers/staging/rdma/hfi1/diag.c b/drivers/staging/rdma/hfi1/diag.c
index 776ccee..0947d29 100644
--- a/drivers/staging/rdma/hfi1/diag.c
+++ b/drivers/staging/rdma/hfi1/diag.c
@@ -70,6 +70,7 @@
#include "common.h"
#include "verbs_txreq.h"
#include "trace.h"
+#include "eprom.h"
#undef pr_fmt
#define pr_fmt(fmt) DRIVER_NAME ": " fmt
@@ -157,6 +158,9 @@ static long hfi1_ioctl(struct file *fp, unsigned int cmd, unsigned long arg);
static unsigned int hfi1_snoop_poll(struct file *fp,
struct poll_table_struct *wait);
static int hfi1_snoop_release(struct inode *in, struct file *fp);
+static int hfi1_eprom_open(struct inode *in, struct file *fp);
+static long hfi1_eprom_ioctl(struct file *fp, unsigned int cmd,
+ unsigned long arg);
struct hfi1_packet_filter_command {
int opcode;
@@ -189,6 +193,12 @@ static const struct file_operations snoop_file_ops = {
.release = hfi1_snoop_release
};
+static const struct file_operations eprom_file_ops = {
+ .owner = THIS_MODULE,
+ .open = hfi1_eprom_open,
+ .unlocked_ioctl = hfi1_eprom_ioctl
+};
+
struct hfi1_filter_array {
int (*filter)(void *, void *, void *);
};
@@ -236,6 +246,13 @@ int hfi1_diag_add(struct hfi1_devdata *dd)
if (ret)
dd_dev_err(dd, "Unable to init snoop/capture device");
+ snprintf(name, sizeof(name), "%s_eprom%d", class_name(),
+ dd->unit);
+ ret = hfi1_cdev_init(HFI1_EPROM_BASE + dd->unit, name,
+ &eprom_file_ops,
+ &dd->hfi1_eprom.cdev, &dd->hfi1_eprom.class_dev,
+ false);
+
snprintf(name, sizeof(name), "%s_diagpkt", class_name());
if (atomic_inc_return(&diagpkt_count) == 1) {
ret = hfi1_cdev_init(HFI1_DIAGPKT_MINOR, name,
@@ -275,6 +292,7 @@ void hfi1_diag_remove(struct hfi1_devdata *dd)
if (atomic_dec_and_test(&diagpkt_count))
hfi1_cdev_cleanup(&diagpkt_cdev, &diagpkt_device);
hfi1_cdev_cleanup(&dd->diag_cdev, &dd->diag_device);
+ hfi1_cdev_cleanup(&dd->hfi1_eprom.cdev, &dd->hfi1_eprom.class_dev);
}
/*
@@ -1868,3 +1886,92 @@ void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf,
inline_pio_out:
pio_copy(dd, pbuf, pbc, from, count);
}
+
+static int hfi1_eprom_open(struct inode *in, struct file *fp)
+{
+ return 0;
+}
+
+static long hfi1_eprom_ioctl(struct file *fp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct hfi1_devdata *dd = NULL;
+ int read_cmd, write_cmd, read_ok, write_ok;
+ struct hfi1_eprom_cmd ec;
+ u32 dev_id, rlen, rstart;
+ int ret;
+ int unit;
+
+ hfi1_cdbg(IOCTL, "IOCTL recv: 0x%x", cmd);
+
+ if (check_ioctl_access(cmd, arg))
+ return -EFAULT;
+
+ read_cmd = _IOC_DIR(cmd) & _IOC_READ;
+ write_cmd = _IOC_DIR(cmd) & _IOC_WRITE;
+ write_ok = access_ok(VERIFY_WRITE, (void __user *)arg, _IOC_SIZE(cmd));
+ read_ok = access_ok(VERIFY_READ, (void __user *)arg, _IOC_SIZE(cmd));
+
+ if ((read_cmd && !write_ok) || (write_cmd && !read_ok))
+ return -EFAULT;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ /* All commands need user struct except erase chip */
+ if (cmd != HFI1_IOCTL_EP_ERASE_CHIP) {
+ memset(&ec, 0, sizeof(ec));
+ if (copy_from_user(&ec, (struct hfi1_eprom_cmd __user *)arg,
+ sizeof(ec)))
+ return -EFAULT;
+ }
+
+ unit = iminor(fp->f_inode) - HFI1_EPROM_BASE;
+ dd = hfi1_lookup(unit);
+ if (!dd)
+ return -ENODEV;
+
+ /* some devices do not have an EPROM */
+ if (!dd->eprom_available)
+ return -EOPNOTSUPP;
+
+ ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
+ if (ret) {
+ dd_dev_err(dd, "%s: unable to acquire EPROM resource\n",
+ __func__);
+ return ret;
+ }
+
+ switch (cmd) {
+ case HFI1_IOCTL_EP_INFO:
+ dev_id = hfi1_eprom_read_device_id(dd);
+ if (copy_to_user((void __user *)ec.addr, &dev_id,
+ sizeof(dev_id)))
+ ret = -EFAULT;
+ break;
+ case HFI1_IOCTL_EP_ERASE_CHIP:
+ ret = hfi1_eprom_erase_chip(dd);
+ break;
+ case HFI1_IOCTL_EP_ERASE_RANGE:
+ rlen = ec.length;
+ rstart = ec.start;
+ ret = hfi1_eprom_erase_range(dd, rstart, rlen);
+ break;
+ case HFI1_IOCTL_EP_READ_RANGE:
+ rlen = ec.length;
+ rstart = ec.start;
+ ret = hfi1_eprom_read_length(dd, rstart, rlen, ec.addr);
+ break;
+ case HFI1_IOCTL_EP_WRITE_RANGE:
+ rlen = ec.length;
+ rstart = ec.start;
+ ret = hfi1_eprom_write_length(dd, rstart, rlen, ec.addr);
+ break;
+ default:
+ dd_dev_err(dd, "%s: unexpected command %d\n",
+ __func__, cmd);
+ ret = -EINVAL;
+ }
+ release_chip_resource(dd, CR_EPROM);
+ return ret;
+}
diff --git a/drivers/staging/rdma/hfi1/eprom.c b/drivers/staging/rdma/hfi1/eprom.c
index bd87715..73d7104 100644
--- a/drivers/staging/rdma/hfi1/eprom.c
+++ b/drivers/staging/rdma/hfi1/eprom.c
@@ -102,13 +102,6 @@
#define EPROM_WP_N BIT_ULL(14) /* EPROM write line */
/*
- * How long to wait for the EPROM to become available, in ms.
- * The spec 32 Mb EPROM takes around 40s to erase then write.
- * Double it for safety.
- */
-#define EPROM_TIMEOUT 80000 /* ms */
-
-/*
* Turn on external enable line that allows writing on the flash.
*/
static void write_enable(struct hfi1_devdata *dd)
@@ -166,7 +159,7 @@ static int wait_for_not_busy(struct hfi1_devdata *dd)
/*
* Read the device ID from the SPI controller.
*/
-static u32 read_device_id(struct hfi1_devdata *dd)
+u32 hfi1_eprom_read_device_id(struct hfi1_devdata *dd)
{
/* read the Manufacture Device ID */
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID);
@@ -176,7 +169,7 @@ static u32 read_device_id(struct hfi1_devdata *dd)
/*
* Erase the whole flash.
*/
-static int erase_chip(struct hfi1_devdata *dd)
+int hfi1_eprom_erase_chip(struct hfi1_devdata *dd)
{
int ret;
@@ -194,7 +187,7 @@ static int erase_chip(struct hfi1_devdata *dd)
/*
* Erase a range.
*/
-static int erase_range(struct hfi1_devdata *dd, u32 start, u32 len)
+int hfi1_eprom_erase_range(struct hfi1_devdata *dd, u32 start, u32 len)
{
u32 end = start + len;
int ret = 0;
@@ -257,7 +250,8 @@ static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result)
/*
* Read length bytes starting at offset. Copy to user address addr.
*/
-static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+int hfi1_eprom_read_length(struct hfi1_devdata *dd, u32 start, u32 len,
+ u64 addr)
{
u32 offset;
u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
@@ -300,7 +294,8 @@ static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data)
/*
* Write length bytes starting at offset. Read from user address addr.
*/
-static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+int hfi1_eprom_write_length(struct hfi1_devdata *dd, u32 start, u32 len,
+ u64 addr)
{
u32 offset;
u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
@@ -328,108 +323,6 @@ done:
return ret;
}
-/* convert an range composite to a length, in bytes */
-static inline u32 extract_rlen(u32 composite)
-{
- return (composite & 0xffff) * EP_PAGE_SIZE;
-}
-
-/* convert an range composite to a start, in bytes */
-static inline u32 extract_rstart(u32 composite)
-{
- return (composite >> 16) * EP_PAGE_SIZE;
-}
-
-/*
- * Perform the given operation on the EPROM. Called from user space. The
- * user credentials have already been checked.
- *
- * Return 0 on success, -ERRNO on error
- */
-int handle_eprom_command(struct file *fp, const struct hfi1_cmd *cmd)
-{
- struct hfi1_devdata *dd;
- u32 dev_id;
- u32 rlen; /* range length */
- u32 rstart; /* range start */
- int i_minor;
- int ret = 0;
-
- /*
- * Map the device file to device data using the relative minor.
- * The device file minor number is the unit number + 1. 0 is
- * the generic device file - reject it.
- */
- i_minor = iminor(file_inode(fp)) - HFI1_USER_MINOR_BASE;
- if (i_minor <= 0)
- return -EINVAL;
- dd = hfi1_lookup(i_minor - 1);
- if (!dd) {
- pr_err("%s: cannot find unit %d!\n", __func__, i_minor);
- return -EINVAL;
- }
-
- /* some devices do not have an EPROM */
- if (!dd->eprom_available)
- return -EOPNOTSUPP;
-
- ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
- if (ret) {
- dd_dev_err(dd, "%s: unable to acquire EPROM resource\n",
- __func__);
- goto done_asic;
- }
-
- dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n",
- __func__, cmd->type, cmd->len, cmd->addr);
-
- switch (cmd->type) {
- case HFI1_CMD_EP_INFO:
- if (cmd->len != sizeof(u32)) {
- ret = -ERANGE;
- break;
- }
- dev_id = read_device_id(dd);
- /* addr points to a u32 user buffer */
- if (copy_to_user((void __user *)cmd->addr, &dev_id,
- sizeof(u32)))
- ret = -EFAULT;
- break;
-
- case HFI1_CMD_EP_ERASE_CHIP:
- ret = erase_chip(dd);
- break;
-
- case HFI1_CMD_EP_ERASE_RANGE:
- rlen = extract_rlen(cmd->len);
- rstart = extract_rstart(cmd->len);
- ret = erase_range(dd, rstart, rlen);
- break;
-
- case HFI1_CMD_EP_READ_RANGE:
- rlen = extract_rlen(cmd->len);
- rstart = extract_rstart(cmd->len);
- ret = read_length(dd, rstart, rlen, cmd->addr);
- break;
-
- case HFI1_CMD_EP_WRITE_RANGE:
- rlen = extract_rlen(cmd->len);
- rstart = extract_rstart(cmd->len);
- ret = write_length(dd, rstart, rlen, cmd->addr);
- break;
-
- default:
- dd_dev_err(dd, "%s: unexpected command %d\n",
- __func__, cmd->type);
- ret = -EINVAL;
- break;
- }
-
- release_chip_resource(dd, CR_EPROM);
-done_asic:
- return ret;
-}
-
/*
* Initialize the EPROM handler.
*/
diff --git a/drivers/staging/rdma/hfi1/eprom.h b/drivers/staging/rdma/hfi1/eprom.h
index d41f0b1..60c1e08 100644
--- a/drivers/staging/rdma/hfi1/eprom.h
+++ b/drivers/staging/rdma/hfi1/eprom.h
@@ -45,8 +45,20 @@
*
*/
-struct hfi1_cmd;
+/*
+ * How long to wait for the EPROM to become available, in ms.
+ * The spec 32 Mb EPROM takes around 40s to erase then write.
+ * Double it for safety.
+ */
+#define EPROM_TIMEOUT 80000 /* ms */
+
struct hfi1_devdata;
int eprom_init(struct hfi1_devdata *dd);
-int handle_eprom_command(struct file *fp, const struct hfi1_cmd *cmd);
+u32 hfi1_eprom_read_device_id(struct hfi1_devdata *dd);
+int hfi1_eprom_erase_chip(struct hfi1_devdata *dd);
+int hfi1_eprom_read_length(struct hfi1_devdata *dd, u32 start, u32 len,
+ u64 addr);
+int hfi1_eprom_write_length(struct hfi1_devdata *dd, u32 start, u32 len,
+ u64 addr);
+int hfi1_eprom_erase_range(struct hfi1_devdata *dd, u32 start, u32 len);
diff --git a/drivers/staging/rdma/hfi1/file_ops.c b/drivers/staging/rdma/hfi1/file_ops.c
index 26f3d8f..752a927 100644
--- a/drivers/staging/rdma/hfi1/file_ops.c
+++ b/drivers/staging/rdma/hfi1/file_ops.c
@@ -181,8 +181,6 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct hfi1_user_info uinfo;
struct hfi1_tid_info tinfo;
- struct hfi1_cmd ucmd;
- int uctxt_required = 1;
int ret = 0;
unsigned long addr;
int uval = 0;
@@ -195,28 +193,9 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd,
hfi1_cdbg(IOCTL, "IOCTL recv: 0x%x", cmd);
- switch (cmd) {
- case HFI1_IOCTL_ASSIGN_CTXT:
- uctxt_required = 0; /* assigned user context not required */
- break;
- case HFI1_IOCTL_EP_INFO:
- case HFI1_IOCTL_EP_ERASE_CHIP:
- case HFI1_IOCTL_EP_ERASE_RANGE:
- case HFI1_IOCTL_EP_READ_RANGE:
- case HFI1_IOCTL_EP_WRITE_RANGE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (copy_from_user(&ucmd,
- (struct hfi11_cmd __user *)arg,
- sizeof(ucmd)))
- return -EFAULT;
- return handle_eprom_command(fp, &ucmd);
- }
-
- if (uctxt_required && !uctxt)
+ if (cmd != HFI1_IOCTL_ASSIGN_CTXT && !uctxt)
return -EINVAL;
- /* Checked for root/context process the IOCTL */
switch (cmd) {
case HFI1_IOCTL_ASSIGN_CTXT:
if (copy_from_user(&uinfo,
diff --git a/drivers/staging/rdma/hfi1/hfi.h b/drivers/staging/rdma/hfi1/hfi.h
index 7351898..81b2028 100644
--- a/drivers/staging/rdma/hfi1/hfi.h
+++ b/drivers/staging/rdma/hfi1/hfi.h
@@ -387,6 +387,11 @@ struct hfi1_snoop_data {
u64 dcc_cfg; /* saved value of DCC Cfg register */
};
+struct hfi1_eprom_data {
+ struct cdev cdev;
+ struct device *class_dev;
+};
+
/* snoop mode_flag values */
#define HFI1_PORT_SNOOP_MODE 1U
#define HFI1_PORT_CAPTURE_MODE 2U
@@ -1098,6 +1103,7 @@ struct hfi1_devdata {
size_t portcntrnameslen;
struct hfi1_snoop_data hfi1_snoop;
+ struct hfi1_eprom_data hfi1_eprom;
struct err_info_rcvport err_info_rcvport;
struct err_info_constraint err_info_rcv_constraint;
@@ -1770,8 +1776,8 @@ extern struct mutex hfi1_mutex;
#define HFI1_DIAGPKT_MINOR 128
#define HFI1_DIAG_MINOR_BASE 129
#define HFI1_SNOOP_CAPTURE_BASE 200
+#define HFI1_EPROM_BASE 220
#define HFI1_NMINORS 255
-
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL0 0x24f0
#define PCI_DEVICE_ID_INTEL1 0x24f1
diff --git a/include/uapi/rdma/hfi/hfi1_user.h b/include/uapi/rdma/hfi/hfi1_user.h
index 5503451..a486eec 100644
--- a/include/uapi/rdma/hfi/hfi1_user.h
+++ b/include/uapi/rdma/hfi/hfi1_user.h
@@ -149,7 +149,7 @@
#define IB_IOCTL_MAGIC 0x1b /* See Documentation/ioctl/ioctl-number.txt */
-struct hfi1_cmd;
+struct hfi1_eprom_cmd;
#define HFI1_PSM_IOC_BASE_SEQ 0x0
#define HFI1_IOCTL_ASSIGN_CTXT \
@@ -177,15 +177,15 @@ struct hfi1_cmd;
#define HFI1_IOCTL_TID_INVAL_READ \
_IOWR(IB_IOCTL_MAGIC, HFI1_CMD_TID_INVAL_READ, struct hfi1_tid_info)
#define HFI1_IOCTL_EP_INFO \
- _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_INFO, struct hfi1_cmd)
+ _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_INFO, struct hfi1_eprom_cmd)
#define HFI1_IOCTL_EP_ERASE_CHIP \
- _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_ERASE_CHIP, struct hfi1_cmd)
+ _IO(IB_IOCTL_MAGIC, HFI1_CMD_EP_ERASE_CHIP)
#define HFI1_IOCTL_EP_ERASE_RANGE \
- _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_ERASE_RANGE, struct hfi1_cmd)
+ _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_ERASE_RANGE, struct hfi1_eprom_cmd)
#define HFI1_IOCTL_EP_READ_RANGE \
- _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_READ_RANGE, struct hfi1_cmd)
+ _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_READ_RANGE, struct hfi1_eprom_cmd)
#define HFI1_IOCTL_EP_WRITE_RANGE \
- _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_WRITE_RANGE, struct hfi1_cmd)
+ _IOWR(IB_IOCTL_MAGIC, HFI1_CMD_EP_WRITE_RANGE, struct hfi1_eprom_cmd)
#define HFI1_SNOOP_IOC_BASE_SEQ 0x80 /* leaves plenty of room for psm */
#define HFI1_SNOOP_IOC_MAGIC IB_IOCTL_MAGIC
@@ -337,11 +337,10 @@ struct hfi1_tid_info {
__u32 length;
};
-/* hfi1_cmd is used for EPROM commands only */
-struct hfi1_cmd {
- __u32 type; /* command type */
- __u32 len; /* length of struct pointed to by add */
- __u64 addr; /* pointer to user structure */
+struct hfi1_eprom_cmd {
+ __u32 start; /* start for a range request */
+ __u32 length; /* length of a range request */
+ __u64 addr; /* pointer to user memory */
};
enum hfi1_sdma_comp_state {
Powered by blists - more mailing lists