linux-kernel - [PATCH 1/2 v2] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1460668031-12384-1-git-send-email-john.stultz@linaro.org>
Date:	Thu, 14 Apr 2016 14:07:10 -0700
From:	John Stultz <john.stultz@...aro.org>
To:	lkml <linux-kernel@...r.kernel.org>
Cc:	John Stultz <john.stultz@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Arnd Bergmann <arnd.bergmann@...aro.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Andy Gross <agross@...eaurora.org>,
	Vinay Simha BN <simhavcs@...il.com>,
	Bjorn Andersson <bjorn.andersson@...aro.org>,
	Stephen Boyd <stephen.boyd@...aro.org>,
	linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH 1/2 v2] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey

Since the pmic8xxx-pwrkey driver is already supported in the
qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
configure proper device shutdown when ps_hold goes low, it is
better to use that driver then a generic gpio button.

Thus this patch remove the gpio power key entry here, so we
don't get double input events from having two drivers enabled.

The one gotcha with the pmic8xxx-pwrkey is it has a fairly
long debounce delay, which we shorten here to make the button
behave as expected.

Cc: Rob Herring <robh+dt@...nel.org>
Cc: Arnd Bergmann <arnd.bergmann@...aro.org>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Cc: Kumar Gala <galak@...eaurora.org>
Cc: Andy Gross <agross@...eaurora.org>
Cc: Vinay Simha BN <simhavcs@...il.com>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Stephen Boyd <stephen.boyd@...aro.org>
Cc: linux-arm-msm@...r.kernel.org
Cc: devicetree@...r.kernel.org
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
v2:
 - Add wakeup-source entry as suggested by
   Sudeep Holla <sudeep.holla@....com>

 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index c535b3f..15da084 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -29,12 +29,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		power {
-			label = "Power";
-			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
 		volume_up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
@@ -190,6 +184,16 @@
 			};
 		};
 
+		/* override default debounce for power-key */
+		qcom,ssbi@...000 {
+			pmic@0 {
+				pwrkey@1c {
+					debounce = <1>;
+					wakeup-source;
+				};
+			};
+		};
+
 		gsbi@...00000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
-- 
1.9.1