| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160415080538.GR2510@phenom.ffwll.local>
Date: Fri, 15 Apr 2016 10:05:38 +0200
From: Daniel Vetter <daniel@...ll.ch>
To: Gustavo Padovan <gustavo@...ovan.org>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Daniel Stone <daniels@...labora.com>,
Arve Hjønnevåg <arve@...roid.com>,
Riley Andrews <riandrews@...roid.com>,
Daniel Vetter <daniel.vetter@...ll.ch>,
Rob Clark <robdclark@...il.com>,
Greg Hackmann <ghackmann@...gle.com>,
John Harrison <John.C.Harrison@...el.com>,
laurent.pinchart@...asonboard.com, seanpaul@...gle.com,
marcheu@...gle.com, m.chehab@...sung.com,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Gustavo Padovan <gustavo.padovan@...labora.co.uk>
Subject: Re: [RFC 4/8] drm/fence: add in-fences support
On Thu, Apr 14, 2016 at 06:29:37PM -0700, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@...labora.co.uk>
>
> There is now a new property called FENCE_FD attached to every plane
> state that receives the sync_file fd from userspace via the atomic commit
> IOCTL.
>
> The fd is then translated to a fence (that may be a fence_collection
> subclass or just a normal fence) and then used by DRM to fence_wait() for
> all fences in the sync_file to signal. So it only commits when all
> framebuffers are ready to scanout.
>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@...labora.co.uk>
> ---
> drivers/gpu/drm/Kconfig | 1 +
> drivers/gpu/drm/drm_atomic.c | 8 ++++++++
> drivers/gpu/drm/drm_atomic_helper.c | 5 +++++
> drivers/gpu/drm/drm_crtc.c | 7 +++++++
> include/drm/drm_crtc.h | 1 +
> 5 files changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index f2a74d0..3c987e3 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -12,6 +12,7 @@ menuconfig DRM
> select I2C
> select I2C_ALGOBIT
> select DMA_SHARED_BUFFER
> + select SYNC_FILE
> help
> Kernel-level support for the Direct Rendering Infrastructure (DRI)
> introduced in XFree86 4.0. If you say Y here, you need to select
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 8ee1db8..6702502 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -30,6 +30,7 @@
> #include <drm/drm_atomic.h>
> #include <drm/drm_mode.h>
> #include <drm/drm_plane_helper.h>
> +#include <linux/sync_file.h>
>
> /**
> * drm_atomic_state_default_release -
> @@ -680,6 +681,11 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
> drm_atomic_set_fb_for_plane(state, fb);
> if (fb)
> drm_framebuffer_unreference(fb);
> + } else if (property == config->prop_fence_fd) {
> + state->fence = sync_file_fences_get(val);
> + if (!state->fence)
> + return -EINVAL;
> + fence_get(state->fence);
Yeah, this fence_get must be part of sync_file_fences_get, this code here
has a race (exercise for the reader to describe where things go wrong
here). Also, you need to explicitly filter out -1 here first I think.
Needs an atomic testcase to make sure setting FENCE_FD to -1 doesn't fall
over (since generic userspace might do this in an attempt to restore all
the state).
> } else if (property == config->prop_crtc_id) {
> struct drm_crtc *crtc = drm_crtc_find(dev, val);
> return drm_atomic_set_crtc_for_plane(state, crtc);
> @@ -737,6 +743,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
>
> if (property == config->prop_fb_id) {
> *val = (state->fb) ? state->fb->base.id : 0;
> + } else if (property == config->prop_fence_fd) {
> + *val = -1;
> } else if (property == config->prop_crtc_id) {
> *val = (state->crtc) ? state->crtc->base.id : 0;
> } else if (property == config->prop_crtc_x) {
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index f85ef8c..6ed8339 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -2687,6 +2687,11 @@ void __drm_atomic_helper_plane_destroy_state(struct drm_plane *plane,
> {
> if (state->fb)
> drm_framebuffer_unreference(state->fb);
> +
> + if (state->fence) {
> + fence_put(state->fence);
> + state->fence = NULL;
No need to set to NULL, we don't do that for ->fb either.
> + }
> }
> EXPORT_SYMBOL(__drm_atomic_helper_plane_destroy_state);
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 55ffde5..65212ce 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -1278,6 +1278,7 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
>
> if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
> drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
> + drm_object_attach_property(&plane->base, config->prop_fence_fd, -1);
> drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
> drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
> drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
> @@ -1533,6 +1534,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
> return -ENOMEM;
> dev->mode_config.prop_fb_id = prop;
>
> + prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
> + "FENCE_FD", -1, INT_MAX);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.prop_fence_fd = prop;
> +
> prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
> "CRTC_ID", DRM_MODE_OBJECT_CRTC);
> if (!prop)
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 8cb377c..5ba3cda 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -2122,6 +2122,7 @@ struct drm_mode_config {
> struct drm_property *prop_crtc_w;
> struct drm_property *prop_crtc_h;
> struct drm_property *prop_fb_id;
> + struct drm_property *prop_fence_fd;
> struct drm_property *prop_crtc_id;
> struct drm_property *prop_active;
> struct drm_property *prop_mode_id;
> --
> 2.5.5
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Powered by blists - more mailing lists