[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1460716247-28049-3-git-send-email-yamada.masahiro@socionext.com>
Date: Fri, 15 Apr 2016 19:30:47 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: arm@...nel.org
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
linux-kernel@...r.kernel.org,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/2] arm64: dts: uniphier: change release address of spin-table
The 8-byte register located at 0x59801200 on this SoC is dedicated
for waking up secondary CPUs. We can use it and save normal memory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
index 651c9d9..f73b09e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
@@ -77,7 +77,7 @@
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x59801200>;
};
cpu1: cpu@1 {
@@ -85,7 +85,7 @@
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x59801200>;
};
cpu2: cpu@100 {
@@ -93,7 +93,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x59801200>;
};
cpu3: cpu@101 {
@@ -101,7 +101,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
enable-method = "spin-table";
- cpu-release-addr = <0 0x80000100>;
+ cpu-release-addr = <0 0x59801200>;
};
};
--
1.9.1
Powered by blists - more mailing lists