linux-kernel - [PATCH v4 13/13] USB: ch341: implement tx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1460754856-27908-14-git-send-email-greg@chown.ath.cx>
Date:	Fri, 15 Apr 2016 23:14:16 +0200
From:	Grigori Goronzy <greg@...wn.ath.cx>
To:	Johan Hovold <johan@...nel.org>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Grigori Goronzy <greg@...wn.ath.cx>
Subject: [PATCH v4 13/13] USB: ch341: implement tx_empty callback

The status bit was found with USB captures of the Windows driver and
some luck.  Tested on CH340G and CH341A.

v2: unify general status definitions

Signed-off-by: Grigori Goronzy <greg@...wn.ath.cx>
---
 drivers/usb/serial/ch341.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 78adce7..12a430c 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -39,9 +39,6 @@
 /* third irq byte base 0x94 + below */
 /* fourth irq byte normally 0xee */
 
-/* second interrupt byte */
-#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
-
 /* status returned in third interrupt answer byte, inverted in data
    from irq */
 #define CH341_BIT_CTS 0x01
@@ -81,6 +78,10 @@
 #define CH341_LCR_CS6          0x01
 #define CH341_LCR_CS5          0x00
 
+/* General status from register 0x07 and second interrupt byte */
+#define CH341_STATUS_TXBUSY    0x01
+#define CH341_STATUS_MULTI     0x04
+
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
@@ -94,6 +95,7 @@ struct ch341_private {
 	unsigned baud_rate; /* set baud rate */
 	u8 line_control; /* set line control value RTS/DTR */
 	u8 line_status; /* active status of modem control inputs */
+	u8 uart_status; /* generic UART status bits */
 };
 
 static void ch341_set_termios(struct tty_struct *tty,
@@ -184,7 +186,8 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	if (r == 2) {
 		r = 0;
 		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+		priv->line_status = (~buffer[0]) & CH341_BITS_MODEM_STAT;
+		priv->uart_status = buffer[1];
 		spin_unlock_irqrestore(&priv->lock, flags);
 	} else {
 		r = -EPROTO;
@@ -195,6 +198,18 @@ out:
 	return r;
 }
 
+static bool ch341_tx_empty(struct usb_serial_port *port)
+{
+	int r;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+
+	r = ch341_get_status(port->serial->dev, priv);
+	if (r < 0)
+		return true;
+
+	return !(priv->uart_status & CH341_STATUS_TXBUSY);
+}
+
 /* -------------------------------------------------------------------------- */
 
 static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
@@ -493,7 +508,7 @@ static void ch341_update_line_status(struct usb_serial_port *port,
 	priv->line_status = status;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (data[1] & CH341_MULT_STAT)
+	if (data[1] & CH341_STATUS_MULTI)
 		dev_dbg(&port->dev, "Multiple status change\n");
 
 	if (!delta)
@@ -599,6 +614,7 @@ static struct usb_serial_driver ch341_device = {
 	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
 	.set_termios       = ch341_set_termios,
+	.tx_empty          = ch341_tx_empty,
 	.break_ctl         = ch341_break_ctl,
 	.tiocmget          = ch341_tiocmget,
 	.tiocmset          = ch341_tiocmset,
-- 
1.9.1