lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 18 Apr 2016 15:08:42 +0800
From:	Peter Chen <hzpeterchen@...il.com>
To:	Roger Quadros <rogerq@...com>
Cc:	stern@...land.harvard.edu, balbi@...nel.org,
	gregkh@...uxfoundation.org, peter.chen@...escale.com,
	dan.j.williams@...el.com, jun.li@...escale.com,
	mathias.nyman@...ux.intel.com, tony@...mide.com,
	Joao.Pinto@...opsys.com, abrestic@...omium.org,
	r.baldyga@...sung.com, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org
Subject: Re: [PATCH v6 11/12] usb: core: hub: Notify OTG fsm when A device
 sets b_hnp_enable

On Tue, Apr 05, 2016 at 05:05:16PM +0300, Roger Quadros wrote:
> This is the a_set_b_hnp_enable flag in the OTG state machine
> diagram and must be set when the A-Host has successfully set
> the b_hnp_enable feature of the OTG-B-Peripheral attached to it.
> 
> When this bit changes we kick our OTG FSM to make note of the
> change and act accordingly.

Since we have still not added fsm.a_set_b_hnp_en in OTG FSM, and this
patch set is mainly for DRD, would you please move out this patch from
this set?

Peter

> 
> Signed-off-by: Roger Quadros <rogerq@...com>
> ---
>  drivers/usb/core/hub.c | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 38cc4ba..27e3b4c 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -2273,6 +2273,7 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>  			&& udev->parent == udev->bus->root_hub) {
>  		struct usb_otg_descriptor	*desc = NULL;
>  		struct usb_bus			*bus = udev->bus;
> +		struct usb_hcd			*hcd = bus_to_hcd(bus);
>  		unsigned			port1 = udev->portnum;
>  
>  		/* descriptor may appear anywhere in config */
> @@ -2302,6 +2303,9 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>  				dev_err(&udev->dev, "can't set HNP mode: %d\n",
>  									err);
>  				bus->b_hnp_enable = 0;
> +			} else {
> +				/* notify OTG fsm about a_set_b_hnp_enable */
> +				usb_otg_kick_fsm(hcd->otg_dev);
>  			}
>  		} else if (desc->bLength == sizeof
>  				(struct usb_otg_descriptor)) {
> @@ -2312,10 +2316,14 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>  				USB_DEVICE_A_ALT_HNP_SUPPORT,
>  				0, NULL, 0,
>  				USB_CTRL_SET_TIMEOUT);
> -			if (err < 0)
> +			if (err < 0) {
>  				dev_err(&udev->dev,
>  					"set a_alt_hnp_support failed: %d\n",
>  					err);
> +			} else {
> +				/* notify OTG fsm about a_set_b_hnp_enable */
> +				usb_otg_kick_fsm(hcd->otg_dev);
> +			}
>  		}
>  	}
>  #endif
> @@ -4355,8 +4363,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
>  	 */
>  	if (!hdev->parent) {
>  		delay = HUB_ROOT_RESET_TIME;
> -		if (port1 == hdev->bus->otg_port)
> +		if (port1 == hdev->bus->otg_port) {
>  			hdev->bus->b_hnp_enable = 0;
> +#ifdef CONFIG_USB_OTG
> +			/* notify OTG fsm about a_set_b_hnp_enable change */
> +			usb_otg_kick_fsm(hcd->otg_dev);
> +#endif
> +		}
>  	}
>  
>  	/* Some low speed devices have problems with the quick delay, so */
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 

Best Regards,
Peter Chen

Powered by blists - more mailing lists