[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1461071980-5916-3-git-send-email-abrodkin@synopsys.com>
Date: Tue, 19 Apr 2016 16:19:38 +0300
From: Alexey Brodkin <Alexey.Brodkin@...opsys.com>
To: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-snps-arc@...ts.infradead.org
Subject: [PATCH 2/4 v6] drm: Add DT bindings documentation for ARC PGU display controller
This add DT bindings documentation for ARC PGU display controller.
Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Cc: Kumar Gala <galak@...eaurora.org>
Cc: devicetree@...r.kernel.org
Cc: linux-snps-arc@...ts.infradead.org
Acked-by: Rob Herring <robh@...nel.org>
---
No changes v5 -> v6.
Changes v4 -> v5: (addressing Rob's comment)
* Added Rob's acked-by
* Remove "encoder-slave" from the example as well.
Now only "pgu" node is mentioned in the example.
Changes v3 -> v4: (addressing Rob's comments)
* Removed "encoder-slave" from required properties
* Removed "0x" from node names
Changes v2 -> v3:
* Reverted back to initial larger version of example
with minor fixes (thanks Rob for spotting those).
Changes v1 -> v2:
* Removed everything except PGU node itself.
.../devicetree/bindings/display/snps,arcpgu.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..c5c7dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+ ...
+
+ pgu@...XXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+};
--
2.5.5
Powered by blists - more mailing lists