From: Tom Zanussi Add documentation and usage examples for 'hist' triggers. Link: http://lkml.kernel.org/r/2e13f35f47fea6d647f0efefccfc9673ea84b29f.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi Tested-by: Masami Hiramatsu Reviewed-by: Namhyung Kim Signed-off-by: Steven Rostedt --- Documentation/trace/events.txt | 1155 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1155 insertions(+) diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index c010be8c85d7..db223e85bd2f 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -512,3 +512,1158 @@ The following commands are supported: Note that there can be only one traceon or traceoff trigger per triggering event. + +- hist + + This command aggregates event hits into a hash table keyed on one or + more trace event format fields (or stacktrace) and a set of running + totals derived from one or more trace event format fields and/or + event counts (hitcount). + + The format of a hist trigger is as follows: + + hist:keys=[:values=] + [:sort=][:size=#entries][:pause][:continue] + [:clear] [if ] + + When a matching event is hit, an entry is added to a hash table + using the key(s) and value(s) named. Keys and values correspond to + fields in the event's format description. Values must correspond to + numeric fields - on an event hit, the value(s) will be added to a + sum kept for that field. The special string 'hitcount' can be used + in place of an explicit value field - this is simply a count of + event hits. If 'values' isn't specified, an implicit 'hitcount' + value will be automatically created and used as the only value. + Keys can be any field, or the special string 'stacktrace', which + will use the event's kernel stacktrace as the key. The keywords + 'keys' or 'key' can be used to specify keys, and the keywords + 'values', 'vals', or 'val' can be used to specify values. Compound + keys consisting of up to two fields can be specified by the 'keys' + keyword. Hashing a compound key produces a unique entry in the + table for each unique combination of component keys, and can be + useful for providing more fine-grained summaries of event data. + Additionally, sort keys consisting of up to two fields can be + specified by the 'sort' keyword. If more than one field is + specified, the result will be a 'sort within a sort': the first key + is taken to be the primary sort key and the second the secondary + key. + + 'hist' triggers add a 'hist' file to each event's subdirectory. + Reading the 'hist' file for the event will dump the hash table in + its entirety to stdout. Each printed hash table entry is a simple + list of the keys and values comprising the entry; keys are printed + first and are delineated by curly braces, and are followed by the + set of value fields for the entry. By default, numeric fields are + displayed as base-10 integers. This can be modified by appending + any of the following modifiers to the field name: + + .hex display a number as a hex value + .sym display an address as a symbol + .sym-offset display an address as a symbol and offset + .syscall display a syscall id as a system call name + .execname display a common_pid as a program name + + Note that in general the semantics of a given field aren't + interpreted when applying a modifier to it, but there are some + restrictions to be aware of in this regard: + + - only the 'hex' modifier can be used for values (because values + are essentially sums, and the other modifiers don't make sense + in that context). + - the 'execname' modifier can only be used on a 'common_pid'. The + reason for this is that the execname is simply the 'comm' value + saved for the 'current' process when an event was triggered, + which is the same as the common_pid value saved by the event + tracing code. Trying to apply that comm value to other pid + values wouldn't be correct, and typically events that care save + pid-specific comm fields in the event itself. + + A typical usage scenario would be the following to enable a hist + trigger, read its current contents, and then turn it off: + + # echo 'hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + # cat /sys/kernel/debug/tracing/events/net/netif_rx/hist + + # echo '!hist:keys=skbaddr.hex:vals=len' > \ + /sys/kernel/debug/tracing/events/net/netif_rx/trigger + + The trigger file itself can be read to show the details of the + currently attached hist trigger. This information is also displayed + at the top of the 'hist' file when read. + + By default, the size of the hash table is 2048 entries. The 'size' + parameter can be used to specify more or fewer than that. The units + are in terms of hashtable entries - if a run uses more entries than + specified, the results will show the number of 'drops', the number + of hits that were ignored. The size should be a power of 2 between + 128 and 131072 (any non- power-of-2 number specified will be rounded + up). + + The 'sort' parameter can be used to specify a value field to sort + on. The default if unspecified is 'hitcount' and the default sort + order is 'ascending'. To sort in the opposite direction, append + .descending' to the sort key. + + The 'pause' parameter can be used to pause an existing hist trigger + or to start a hist trigger but not log any events until told to do + so. 'continue' or 'cont' can be used to start or restart a paused + hist trigger. + + The 'clear' parameter will clear the contents of a running hist + trigger and leave its current paused/active state. + + Note that the 'pause', 'cont', and 'clear' parameters should be + applied using 'append' shell operator ('>>') if applied to an + existing trigger, rather than via the '>' operator, which will cause + the trigger to be removed through truncation. + +- enable_hist/disable_hist + + The enable_hist and disable_hist triggers can be used to have one + event conditionally start and stop another event's already-attached + hist trigger. Any number of enable_hist and disable_hist triggers + can be attached to a given event, allowing that event to kick off + and stop aggregations on a host of other events. + + The format is very similar to the enable/disable_event triggers: + + enable_hist::[:count] + disable_hist::[:count] + + Instead of enabling or disabling the tracing of the target event + into the trace buffer as the enable/disable_event triggers do, the + enable/disable_hist triggers enable or disable the aggregation of + the target event into a hash table. + + A typical usage scenario for the enable_hist/disable_hist triggers + would be to first set up a paused hist trigger on some event, + followed by an enable_hist/disable_hist pair that turns the hist + aggregation on and off when conditions of interest are hit: + + # echo 'hist:keys=skbaddr.hex:vals=len:pause' > \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + The above sets up an initially paused hist trigger which is unpaused + and starts aggregating events when a given program is executed, and + which stops aggregating when the process exits and the hist trigger + is paused again. + + The examples below provide a more concrete illustration of the + concepts and typical usage patterns discussed above. + + +6.2 'hist' trigger examples +--------------------------- + + The first set of examples creates aggregations using the kmalloc + event. The fields that can be used for the hist trigger are listed + in the kmalloc event's format file: + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/format + name: kmalloc + ID: 374 + format: + field:unsigned short common_type; offset:0; size:2; signed:0; + field:unsigned char common_flags; offset:2; size:1; signed:0; + field:unsigned char common_preempt_count; offset:3; size:1; signed:0; + field:int common_pid; offset:4; size:4; signed:1; + + field:unsigned long call_site; offset:8; size:8; signed:0; + field:const void * ptr; offset:16; size:8; signed:0; + field:size_t bytes_req; offset:24; size:8; signed:0; + field:size_t bytes_alloc; offset:32; size:8; signed:0; + field:gfp_t gfp_flags; offset:40; size:4; signed:0; + + We'll start by creating a hist trigger that generates a simple table + that lists the total number of bytes requested for each function in + the kernel that made one or more calls to kmalloc: + + # echo 'hist:key=call_site:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + This tells the tracing system to create a 'hist' trigger using the + call_site field of the kmalloc event as the key for the table, which + just means that each unique call_site address will have an entry + created for it in the table. The 'val=bytes_req' parameter tells + the hist trigger that for each unique entry (call_site) in the + table, it should keep a running total of the number of bytes + requested by that call_site. + + We'll let it run for awhile and then dump the contents of the 'hist' + file in the kmalloc event's subdirectory (for readability, a number + of entries have been omitted): + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: 18446744072106379007 } hitcount: 1 bytes_req: 176 + { call_site: 18446744071579557049 } hitcount: 1 bytes_req: 1024 + { call_site: 18446744071580608289 } hitcount: 1 bytes_req: 16384 + { call_site: 18446744071581827654 } hitcount: 1 bytes_req: 24 + { call_site: 18446744071580700980 } hitcount: 1 bytes_req: 8 + { call_site: 18446744071579359876 } hitcount: 1 bytes_req: 152 + { call_site: 18446744071580795365 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071581303129 } hitcount: 3 bytes_req: 144 + { call_site: 18446744071580713234 } hitcount: 4 bytes_req: 2560 + { call_site: 18446744071580933750 } hitcount: 4 bytes_req: 736 + . + . + . + { call_site: 18446744072106047046 } hitcount: 69 bytes_req: 5576 + { call_site: 18446744071582116407 } hitcount: 73 bytes_req: 2336 + { call_site: 18446744072106054684 } hitcount: 136 bytes_req: 140504 + { call_site: 18446744072106224230 } hitcount: 136 bytes_req: 19584 + { call_site: 18446744072106078074 } hitcount: 153 bytes_req: 2448 + { call_site: 18446744072106062406 } hitcount: 153 bytes_req: 36720 + { call_site: 18446744071582507929 } hitcount: 153 bytes_req: 37088 + { call_site: 18446744072102520590 } hitcount: 273 bytes_req: 10920 + { call_site: 18446744071582143559 } hitcount: 358 bytes_req: 716 + { call_site: 18446744072106465852 } hitcount: 417 bytes_req: 56712 + { call_site: 18446744072102523378 } hitcount: 485 bytes_req: 27160 + { call_site: 18446744072099568646 } hitcount: 1676 bytes_req: 33520 + + Totals: + Hits: 4610 + Entries: 45 + Dropped: 0 + + The output displays a line for each entry, beginning with the key + specified in the trigger, followed by the value(s) also specified in + the trigger. At the beginning of the output is a line that displays + the trigger info, which can also be displayed by reading the + 'trigger' file: + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + hist:keys=call_site:vals=bytes_req:sort=hitcount:size=2048 [active] + + At the end of the output are a few lines that display the overall + totals for the run. The 'Hits' field shows the total number of + times the event trigger was hit, the 'Entries' field shows the total + number of used entries in the hash table, and the 'Dropped' field + shows the number of hits that were dropped because the number of + used entries for the run exceeded the maximum number of entries + allowed for the table (normally 0, but if not a hint that you may + want to increase the size of the table using the 'size' parameter). + + Notice in the above output that there's an extra field, 'hitcount', + which wasn't specified in the trigger. Also notice that in the + trigger info output, there's a parameter, 'sort=hitcount', which + wasn't specified in the trigger either. The reason for that is that + every trigger implicitly keeps a count of the total number of hits + attributed to a given entry, called the 'hitcount'. That hitcount + information is explicitly displayed in the output, and in the + absence of a user-specified sort parameter, is used as the default + sort field. + + The value 'hitcount' can be used in place of an explicit value in + the 'values' parameter if you don't really need to have any + particular field summed and are mainly interested in hit + frequencies. + + To turn the hist trigger off, simply call up the trigger in the + command history and re-execute it with a '!' prepended: + + # echo '!hist:key=call_site:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + Finally, notice that the call_site as displayed in the output above + isn't really very useful. It's an address, but normally addresses + are displayed in hex. To have a numeric field displayed as a hex + value, simply append '.hex' to the field name in the trigger: + + # echo 'hist:key=call_site.hex:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.hex:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: ffffffffa026b291 } hitcount: 1 bytes_req: 433 + { call_site: ffffffffa07186ff } hitcount: 1 bytes_req: 176 + { call_site: ffffffff811ae721 } hitcount: 1 bytes_req: 16384 + { call_site: ffffffff811c5134 } hitcount: 1 bytes_req: 8 + { call_site: ffffffffa04a9ebb } hitcount: 1 bytes_req: 511 + { call_site: ffffffff8122e0a6 } hitcount: 1 bytes_req: 12 + { call_site: ffffffff8107da84 } hitcount: 1 bytes_req: 152 + { call_site: ffffffff812d8246 } hitcount: 1 bytes_req: 24 + { call_site: ffffffff811dc1e5 } hitcount: 3 bytes_req: 144 + { call_site: ffffffffa02515e8 } hitcount: 3 bytes_req: 648 + { call_site: ffffffff81258159 } hitcount: 3 bytes_req: 144 + { call_site: ffffffff811c80f4 } hitcount: 4 bytes_req: 544 + . + . + . + { call_site: ffffffffa06c7646 } hitcount: 106 bytes_req: 8024 + { call_site: ffffffffa06cb246 } hitcount: 132 bytes_req: 31680 + { call_site: ffffffffa06cef7a } hitcount: 132 bytes_req: 2112 + { call_site: ffffffff8137e399 } hitcount: 132 bytes_req: 23232 + { call_site: ffffffffa06c941c } hitcount: 185 bytes_req: 171360 + { call_site: ffffffffa06f2a66 } hitcount: 185 bytes_req: 26640 + { call_site: ffffffffa036a70e } hitcount: 265 bytes_req: 10600 + { call_site: ffffffff81325447 } hitcount: 292 bytes_req: 584 + { call_site: ffffffffa072da3c } hitcount: 446 bytes_req: 60656 + { call_site: ffffffffa036b1f2 } hitcount: 526 bytes_req: 29456 + { call_site: ffffffffa0099c06 } hitcount: 1780 bytes_req: 35600 + + Totals: + Hits: 4775 + Entries: 46 + Dropped: 0 + + Even that's only marginally more useful - while hex values do look + more like addresses, what users are typically more interested in + when looking at text addresses are the corresponding symbols + instead. To have an address displayed as symbolic value instead, + simply append '.sym' or '.sym-offset' to the field name in the + trigger: + + # echo 'hist:key=call_site.sym:val=bytes_req' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=hitcount:size=2048 [active] + + { call_site: [ffffffff810adcb9] syslog_print_all } hitcount: 1 bytes_req: 1024 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff8154acbe] usb_alloc_urb } hitcount: 1 bytes_req: 192 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff811febd5] fsnotify_alloc_group } hitcount: 2 bytes_req: 528 + { call_site: [ffffffff81440f58] __tty_buffer_request_room } hitcount: 2 bytes_req: 2624 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 2 bytes_req: 96 + { call_site: [ffffffffa05e19af] ieee80211_start_tx_ba_session [mac80211] } hitcount: 2 bytes_req: 464 + { call_site: [ffffffff81672406] tcp_get_metrics } hitcount: 2 bytes_req: 304 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81089b05] sched_create_group } hitcount: 2 bytes_req: 1424 + . + . + . + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1185 bytes_req: 123240 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 1185 bytes_req: 104280 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 1402 bytes_req: 190672 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 1518 bytes_req: 146208 + { call_site: [ffffffffa029070e] drm_vma_node_allow [drm] } hitcount: 1746 bytes_req: 69840 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 2021 bytes_req: 792312 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 2592 bytes_req: 145152 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2629 bytes_req: 378576 + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2629 bytes_req: 3783248 + { call_site: [ffffffff81325607] apparmor_file_alloc_security } hitcount: 5192 bytes_req: 10384 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 5529 bytes_req: 110584 + { call_site: [ffffffff8131ebf7] aa_alloc_task_context } hitcount: 21943 bytes_req: 702176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 55759 bytes_req: 5074265 + + Totals: + Hits: 109928 + Entries: 71 + Dropped: 0 + + Because the default sort key above is 'hitcount', the above shows a + the list of call_sites by increasing hitcount, so that at the bottom + we see the functions that made the most kmalloc calls during the + run. If instead we we wanted to see the top kmalloc callers in + terms of the number of bytes requested rather than the number of + calls, and we wanted the top caller to appear at the top, we can use + the 'sort' parameter, along with the 'descending' modifier: + + # echo 'hist:key=call_site.sym:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 2186 bytes_req: 3397464 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1790 bytes_req: 712176 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 8132 bytes_req: 513135 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 106 bytes_req: 440128 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 2186 bytes_req: 314784 + { call_site: [ffffffff812891ca] ext4_find_extent } hitcount: 2174 bytes_req: 208992 + { call_site: [ffffffff811ae8e1] __kmalloc } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 859 bytes_req: 116824 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 1834 bytes_req: 102704 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 972 bytes_req: 101088 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl [drm] } hitcount: 972 bytes_req: 85536 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 3333 bytes_req: 66664 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 209 bytes_req: 61632 + . + . + . + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 + { call_site: [ffffffff812d8406] copy_semundo } hitcount: 2 bytes_req: 48 + { call_site: [ffffffff81200ba6] inotify_new_group } hitcount: 1 bytes_req: 48 + { call_site: [ffffffffa027121a] drm_getmagic [drm] } hitcount: 1 bytes_req: 48 + { call_site: [ffffffff811e3a25] __seq_open_private } hitcount: 1 bytes_req: 40 + { call_site: [ffffffff811c52f4] bprm_change_interp } hitcount: 2 bytes_req: 16 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 32133 + Entries: 81 + Dropped: 0 + + To display the offset and size information in addition to the symbol + name, just use 'sym-offset' instead: + + # echo 'hist:key=call_site.sym-offset:val=bytes_req:sort=bytes_req.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym-offset:vals=bytes_req:sort=bytes_req.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2+0x6c/0x2c0 [i915] } hitcount: 4569 bytes_req: 3163720 + { call_site: [ffffffffa0489a66] intel_ring_begin+0xc6/0x1f0 [i915] } hitcount: 4569 bytes_req: 657936 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23+0x694/0x1020 [i915] } hitcount: 1519 bytes_req: 472936 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23+0x516/0x1020 [i915] } hitcount: 3050 bytes_req: 211832 + { call_site: [ffffffff811e2a1b] seq_buf_alloc+0x1b/0x50 } hitcount: 34 bytes_req: 148384 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip+0xbc/0x870 [i915] } hitcount: 1385 bytes_req: 144040 + { call_site: [ffffffff811ae8e1] __kmalloc+0x191/0x1b0 } hitcount: 8 bytes_req: 131072 + { call_site: [ffffffffa0287592] drm_mode_page_flip_ioctl+0x282/0x360 [drm] } hitcount: 1385 bytes_req: 121880 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc+0x32/0x100 [drm] } hitcount: 1848 bytes_req: 103488 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state+0x2c/0xa0 [i915] } hitcount: 461 bytes_req: 62696 + { call_site: [ffffffffa029070e] drm_vma_node_allow+0x2e/0xd0 [drm] } hitcount: 1541 bytes_req: 61640 + { call_site: [ffffffff815f8d7b] sk_prot_alloc+0xcb/0x1b0 } hitcount: 57 bytes_req: 57456 + . + . + . + { call_site: [ffffffff8109524a] alloc_fair_sched_group+0x5a/0x1a0 } hitcount: 2 bytes_req: 128 + { call_site: [ffffffffa027b921] drm_vm_open_locked+0x31/0xa0 [drm] } hitcount: 3 bytes_req: 96 + { call_site: [ffffffff8122e266] proc_self_follow_link+0x76/0xb0 } hitcount: 8 bytes_req: 96 + { call_site: [ffffffff81213e80] load_elf_binary+0x240/0x1650 } hitcount: 3 bytes_req: 84 + { call_site: [ffffffff8154bc62] usb_control_msg+0x42/0x110 } hitcount: 1 bytes_req: 8 + { call_site: [ffffffffa00bf6fe] hidraw_send_report+0x7e/0x1a0 [hid] } hitcount: 1 bytes_req: 7 + { call_site: [ffffffffa00bf1ca] hidraw_report_event+0x8a/0x120 [hid] } hitcount: 1 bytes_req: 7 + + Totals: + Hits: 26098 + Entries: 64 + Dropped: 0 + + We can also add multiple fields to the 'values' parameter. For + example, we might want to see the total number of bytes allocated + alongside bytes requested, and display the result sorted by bytes + allocated in a descending order: + + # echo 'hist:keys=call_site.sym:values=bytes_req,bytes_alloc:sort=bytes_alloc.descending' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=call_site.sym:vals=bytes_req,bytes_alloc:sort=bytes_alloc.descending:size=2048 [active] + + { call_site: [ffffffffa046041c] i915_gem_execbuffer2 [i915] } hitcount: 7403 bytes_req: 4084360 bytes_alloc: 5958016 + { call_site: [ffffffff811e2a1b] seq_buf_alloc } hitcount: 541 bytes_req: 2213968 bytes_alloc: 2228224 + { call_site: [ffffffffa0489a66] intel_ring_begin [i915] } hitcount: 7404 bytes_req: 1066176 bytes_alloc: 1421568 + { call_site: [ffffffffa045e7c4] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 1565 bytes_req: 557368 bytes_alloc: 1037760 + { call_site: [ffffffff8125847d] ext4_htree_store_dirent } hitcount: 9557 bytes_req: 595778 bytes_alloc: 695744 + { call_site: [ffffffffa045e646] i915_gem_do_execbuffer.isra.23 [i915] } hitcount: 5839 bytes_req: 430680 bytes_alloc: 470400 + { call_site: [ffffffffa04c4a3c] intel_plane_duplicate_state [i915] } hitcount: 2388 bytes_req: 324768 bytes_alloc: 458496 + { call_site: [ffffffffa02911f2] drm_modeset_lock_crtc [drm] } hitcount: 3911 bytes_req: 219016 bytes_alloc: 250304 + { call_site: [ffffffff815f8d7b] sk_prot_alloc } hitcount: 235 bytes_req: 236880 bytes_alloc: 240640 + { call_site: [ffffffff8137e559] sg_kmalloc } hitcount: 557 bytes_req: 169024 bytes_alloc: 221760 + { call_site: [ffffffffa00b7c06] hid_report_raw_event [hid] } hitcount: 9378 bytes_req: 187548 bytes_alloc: 206312 + { call_site: [ffffffffa04a580c] intel_crtc_page_flip [i915] } hitcount: 1519 bytes_req: 157976 bytes_alloc: 194432 + . + . + . + { call_site: [ffffffff8109bd3b] sched_autogroup_create_attach } hitcount: 2 bytes_req: 144 bytes_alloc: 192 + { call_site: [ffffffff81097ee8] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff8109524a] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81095225] alloc_fair_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81097ec2] alloc_rt_sched_group } hitcount: 2 bytes_req: 128 bytes_alloc: 128 + { call_site: [ffffffff81213e80] load_elf_binary } hitcount: 3 bytes_req: 84 bytes_alloc: 96 + { call_site: [ffffffff81079a2e] kthread_create_on_node } hitcount: 1 bytes_req: 56 bytes_alloc: 64 + { call_site: [ffffffffa00bf6fe] hidraw_send_report [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + { call_site: [ffffffff8154bc62] usb_control_msg } hitcount: 1 bytes_req: 8 bytes_alloc: 8 + { call_site: [ffffffffa00bf1ca] hidraw_report_event [hid] } hitcount: 1 bytes_req: 7 bytes_alloc: 8 + + Totals: + Hits: 66598 + Entries: 65 + Dropped: 0 + + Finally, to finish off our kmalloc example, instead of simply having + the hist trigger display symbolic call_sites, we can have the hist + trigger additionally display the complete set of kernel stack traces + that led to each call_site. To do that, we simply use the special + value 'stacktrace' for the key parameter: + + # echo 'hist:keys=stacktrace:values=bytes_req,bytes_alloc:sort=bytes_alloc' > \ + /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger + + The above trigger will use the kernel stack trace in effect when an + event is triggered as the key for the hash table. This allows the + enumeration of every kernel callpath that led up to a particular + event, along with a running total of any of the event fields for + that event. Here we tally bytes requested and bytes allocated for + every callpath in the system that led up to a kmalloc (in this case + every callpath to a kmalloc for a kernel compile): + + # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/hist + # trigger info: hist:keys=stacktrace:vals=bytes_req,bytes_alloc:sort=bytes_alloc:size=2048 [active] + + { stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + cpuidle_enter+0x17/0x20 + cpu_startup_entry+0x315/0x3e0 + rest_init+0x7c/0x80 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { stacktrace: + __kmalloc_track_caller+0x10b/0x1a0 + kmemdup+0x20/0x50 + hidraw_report_event+0x8a/0x120 [hid] + hid_report_raw_event+0x3ea/0x440 [hid] + hid_input_report+0x112/0x190 [hid] + hid_irq_in+0xc2/0x260 [usbhid] + __usb_hcd_giveback_urb+0x72/0x120 + usb_giveback_urb_bh+0x9e/0xe0 + tasklet_hi_action+0xf8/0x100 + __do_softirq+0x114/0x2c0 + irq_exit+0xa5/0xb0 + do_IRQ+0x5a/0xf0 + ret_from_intr+0x0/0x30 + } hitcount: 3 bytes_req: 21 bytes_alloc: 24 + { stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + aa_alloc_task_context+0x27/0x40 + apparmor_cred_prepare+0x1f/0x50 + security_prepare_creds+0x16/0x20 + prepare_creds+0xdf/0x1a0 + SyS_capset+0xb5/0x200 + system_call_fastpath+0x12/0x6a + } hitcount: 1 bytes_req: 32 bytes_alloc: 32 + . + . + . + { stacktrace: + __kmalloc+0x11b/0x1b0 + i915_gem_execbuffer2+0x6c/0x2c0 [i915] + drm_ioctl+0x349/0x670 [drm] + do_vfs_ioctl+0x2f0/0x4f0 + SyS_ioctl+0x81/0xa0 + system_call_fastpath+0x12/0x6a + } hitcount: 17726 bytes_req: 13944120 bytes_alloc: 19593808 + { stacktrace: + __kmalloc+0x11b/0x1b0 + load_elf_phdrs+0x76/0xa0 + load_elf_binary+0x102/0x1650 + search_binary_handler+0x97/0x1d0 + do_execveat_common.isra.34+0x551/0x6e0 + SyS_execve+0x3a/0x50 + return_from_execve+0x0/0x23 + } hitcount: 33348 bytes_req: 17152128 bytes_alloc: 20226048 + { stacktrace: + kmem_cache_alloc_trace+0xeb/0x150 + apparmor_file_alloc_security+0x27/0x40 + security_file_alloc+0x16/0x20 + get_empty_filp+0x93/0x1c0 + path_openat+0x31/0x5f0 + do_filp_open+0x3a/0x90 + do_sys_open+0x128/0x220 + SyS_open+0x1e/0x20 + system_call_fastpath+0x12/0x6a + } hitcount: 4766422 bytes_req: 9532844 bytes_alloc: 38131376 + { stacktrace: + __kmalloc+0x11b/0x1b0 + seq_buf_alloc+0x1b/0x50 + seq_read+0x2cc/0x370 + proc_reg_read+0x3d/0x80 + __vfs_read+0x28/0xe0 + vfs_read+0x86/0x140 + SyS_read+0x46/0xb0 + system_call_fastpath+0x12/0x6a + } hitcount: 19133 bytes_req: 78368768 bytes_alloc: 78368768 + + Totals: + Hits: 6085872 + Entries: 253 + Dropped: 0 + + If you key a hist trigger on common_pid, in order for example to + gather and display sorted totals for each process, you can use the + special .execname modifier to display the executable names for the + processes in the table rather than raw pids. The example below + keeps a per-process sum of total bytes read: + + # echo 'hist:key=common_pid.execname:val=count:sort=count.descending' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger + + # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/hist + # trigger info: hist:keys=common_pid.execname:vals=count:sort=count.descending:size=2048 [active] + + { common_pid: gnome-terminal [ 3196] } hitcount: 280 count: 1093512 + { common_pid: Xorg [ 1309] } hitcount: 525 count: 256640 + { common_pid: compiz [ 2889] } hitcount: 59 count: 254400 + { common_pid: bash [ 8710] } hitcount: 3 count: 66369 + { common_pid: dbus-daemon-lau [ 8703] } hitcount: 49 count: 47739 + { common_pid: irqbalance [ 1252] } hitcount: 27 count: 27648 + { common_pid: 01ifupdown [ 8705] } hitcount: 3 count: 17216 + { common_pid: dbus-daemon [ 772] } hitcount: 10 count: 12396 + { common_pid: Socket Thread [ 8342] } hitcount: 11 count: 11264 + { common_pid: nm-dhcp-client. [ 8701] } hitcount: 6 count: 7424 + { common_pid: gmain [ 1315] } hitcount: 18 count: 6336 + . + . + . + { common_pid: postgres [ 1892] } hitcount: 2 count: 32 + { common_pid: postgres [ 1891] } hitcount: 2 count: 32 + { common_pid: gmain [ 8704] } hitcount: 2 count: 32 + { common_pid: upstart-dbus-br [ 2740] } hitcount: 21 count: 21 + { common_pid: nm-dispatcher.a [ 8696] } hitcount: 1 count: 16 + { common_pid: indicator-datet [ 2904] } hitcount: 1 count: 16 + { common_pid: gdbus [ 2998] } hitcount: 1 count: 16 + { common_pid: rtkit-daemon [ 2052] } hitcount: 1 count: 8 + { common_pid: init [ 1] } hitcount: 2 count: 2 + + Totals: + Hits: 2116 + Entries: 51 + Dropped: 0 + + Similarly, if you key a hist trigger on syscall id, for example to + gather and display a list of systemwide syscall hits, you can use + the special .syscall modifier to display the syscall names rather + than raw ids. The example below keeps a running total of syscall + counts for the system during the run: + + # echo 'hist:key=id.syscall:val=hitcount' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall:vals=hitcount:sort=hitcount:size=2048 [active] + + { id: sys_fsync [ 74] } hitcount: 1 + { id: sys_newuname [ 63] } hitcount: 1 + { id: sys_prctl [157] } hitcount: 1 + { id: sys_statfs [137] } hitcount: 1 + { id: sys_symlink [ 88] } hitcount: 1 + { id: sys_sendmmsg [307] } hitcount: 1 + { id: sys_semctl [ 66] } hitcount: 1 + { id: sys_readlink [ 89] } hitcount: 3 + { id: sys_bind [ 49] } hitcount: 3 + { id: sys_getsockname [ 51] } hitcount: 3 + { id: sys_unlink [ 87] } hitcount: 3 + { id: sys_rename [ 82] } hitcount: 4 + { id: unknown_syscall [ 58] } hitcount: 4 + { id: sys_connect [ 42] } hitcount: 4 + { id: sys_getpid [ 39] } hitcount: 4 + . + . + . + { id: sys_rt_sigprocmask [ 14] } hitcount: 952 + { id: sys_futex [202] } hitcount: 1534 + { id: sys_write [ 1] } hitcount: 2689 + { id: sys_setitimer [ 38] } hitcount: 2797 + { id: sys_read [ 0] } hitcount: 3202 + { id: sys_select [ 23] } hitcount: 3773 + { id: sys_writev [ 20] } hitcount: 4531 + { id: sys_poll [ 7] } hitcount: 8314 + { id: sys_recvmsg [ 47] } hitcount: 13738 + { id: sys_ioctl [ 16] } hitcount: 21843 + + Totals: + Hits: 67612 + Entries: 72 + Dropped: 0 + + The syscall counts above provide a rough overall picture of system + call activity on the system; we can see for example that the most + popular system call on this system was the 'sys_ioctl' system call. + + We can use 'compound' keys to refine that number and provide some + further insight as to which processes exactly contribute to the + overall ioctl count. + + The command below keeps a hitcount for every unique combination of + system call id and pid - the end result is essentially a table + that keeps a per-pid sum of system call hits. The results are + sorted using the system call id as the primary key, and the + hitcount sum as the secondary key: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 [active] + + { id: sys_read [ 0], common_pid: rtkit-daemon [ 1877] } hitcount: 1 + { id: sys_read [ 0], common_pid: gdbus [ 2976] } hitcount: 1 + { id: sys_read [ 0], common_pid: console-kit-dae [ 3400] } hitcount: 1 + { id: sys_read [ 0], common_pid: postgres [ 1865] } hitcount: 1 + { id: sys_read [ 0], common_pid: deja-dup-monito [ 3543] } hitcount: 2 + { id: sys_read [ 0], common_pid: NetworkManager [ 890] } hitcount: 2 + { id: sys_read [ 0], common_pid: evolution-calen [ 3048] } hitcount: 2 + { id: sys_read [ 0], common_pid: postgres [ 1864] } hitcount: 2 + { id: sys_read [ 0], common_pid: nm-applet [ 3022] } hitcount: 2 + { id: sys_read [ 0], common_pid: whoopsie [ 1212] } hitcount: 2 + . + . + . + { id: sys_ioctl [ 16], common_pid: bash [ 8479] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 3472] } hitcount: 12 + { id: sys_ioctl [ 16], common_pid: gnome-terminal [ 3199] } hitcount: 16 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 1808 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 5580 + . + . + . + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2690] } hitcount: 3 + { id: sys_waitid [247], common_pid: upstart-dbus-br [ 2688] } hitcount: 16 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 975] } hitcount: 2 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3204] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2888] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3003] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 2873] } hitcount: 4 + { id: sys_inotify_add_watch [254], common_pid: gmain [ 3196] } hitcount: 6 + { id: sys_openat [257], common_pid: java [ 2623] } hitcount: 2 + { id: sys_eventfd2 [290], common_pid: ibus-ui-gtk3 [ 2760] } hitcount: 4 + { id: sys_eventfd2 [290], common_pid: compiz [ 2994] } hitcount: 6 + + Totals: + Hits: 31536 + Entries: 323 + Dropped: 0 + + The above list does give us a breakdown of the ioctl syscall by + pid, but it also gives us quite a bit more than that, which we + don't really care about at the moment. Since we know the syscall + id for sys_ioctl (16, displayed next to the sys_ioctl name), we + can use that to filter out all the other syscalls: + + # echo 'hist:key=id.syscall,common_pid.execname:val=hitcount:sort=id,hitcount if id == 16' > \ + /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger + + # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist + # trigger info: hist:keys=id.syscall,common_pid.execname:vals=hitcount:sort=id.syscall,hitcount:size=2048 if id == 16 [active] + + { id: sys_ioctl [ 16], common_pid: gmain [ 2769] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: evolution-addre [ 8571] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 3003] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2781] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2829] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8726] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: bash [ 8508] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2970] } hitcount: 1 + { id: sys_ioctl [ 16], common_pid: gmain [ 2768] } hitcount: 1 + . + . + . + { id: sys_ioctl [ 16], common_pid: pool [ 8559] } hitcount: 45 + { id: sys_ioctl [ 16], common_pid: pool [ 8555] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: pool [ 8551] } hitcount: 48 + { id: sys_ioctl [ 16], common_pid: avahi-daemon [ 896] } hitcount: 66 + { id: sys_ioctl [ 16], common_pid: Xorg [ 1267] } hitcount: 26674 + { id: sys_ioctl [ 16], common_pid: compiz [ 2994] } hitcount: 73443 + + Totals: + Hits: 101162 + Entries: 103 + Dropped: 0 + + The above output shows that 'compiz' and 'Xorg' are far and away + the heaviest ioctl callers (which might lead to questions about + whether they really need to be making all those calls and to + possible avenues for further investigation.) + + The compound key examples used a key and a sum value (hitcount) to + sort the output, but we can just as easily use two keys instead. + Here's an example where we use a compound key composed of the the + common_pid and size event fields. Sorting with pid as the primary + key and 'size' as the secondary key allows us to display an + ordered summary of the recvfrom sizes, with counts, received by + each process: + + # echo 'hist:key=common_pid.execname,size:val=hitcount:sort=common_pid,size' > \ + /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/trigger + + # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_recvfrom/hist + # trigger info: hist:keys=common_pid.execname,size:vals=hitcount:sort=common_pid.execname,size:size=2048 [active] + + { common_pid: smbd [ 784], size: 4 } hitcount: 1 + { common_pid: dnsmasq [ 1412], size: 4096 } hitcount: 672 + { common_pid: postgres [ 1796], size: 1000 } hitcount: 6 + { common_pid: postgres [ 1867], size: 1000 } hitcount: 10 + { common_pid: bamfdaemon [ 2787], size: 28 } hitcount: 2 + { common_pid: bamfdaemon [ 2787], size: 14360 } hitcount: 1 + { common_pid: compiz [ 2994], size: 8 } hitcount: 1 + { common_pid: compiz [ 2994], size: 20 } hitcount: 11 + { common_pid: gnome-terminal [ 3199], size: 4 } hitcount: 2 + { common_pid: firefox [ 8817], size: 4 } hitcount: 1 + { common_pid: firefox [ 8817], size: 8 } hitcount: 5 + { common_pid: firefox [ 8817], size: 588 } hitcount: 2 + { common_pid: firefox [ 8817], size: 628 } hitcount: 1 + { common_pid: firefox [ 8817], size: 6944 } hitcount: 1 + { common_pid: firefox [ 8817], size: 408880 } hitcount: 2 + { common_pid: firefox [ 8822], size: 8 } hitcount: 2 + { common_pid: firefox [ 8822], size: 160 } hitcount: 2 + { common_pid: firefox [ 8822], size: 320 } hitcount: 2 + { common_pid: firefox [ 8822], size: 352 } hitcount: 1 + . + . + . + { common_pid: pool [ 8923], size: 1960 } hitcount: 10 + { common_pid: pool [ 8923], size: 2048 } hitcount: 10 + { common_pid: pool [ 8924], size: 1960 } hitcount: 10 + { common_pid: pool [ 8924], size: 2048 } hitcount: 10 + { common_pid: pool [ 8928], size: 1964 } hitcount: 4 + { common_pid: pool [ 8928], size: 1965 } hitcount: 2 + { common_pid: pool [ 8928], size: 2048 } hitcount: 6 + { common_pid: pool [ 8929], size: 1982 } hitcount: 1 + { common_pid: pool [ 8929], size: 2048 } hitcount: 1 + + Totals: + Hits: 2016 + Entries: 224 + Dropped: 0 + + The above example also illustrates the fact that although a compound + key is treated as a single entity for hashing purposes, the sub-keys + it's composed of can be accessed independently. + + The next example uses a string field as the hash key and + demonstrates how you can manually pause and continue a hist trigger. + In this example, we'll aggregate fork counts and don't expect a + large number of entries in the hash table, so we'll drop it to a + much smaller number, say 256: + + # echo 'hist:key=child_comm:val=hitcount:size=256' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: whoopsie } hitcount: 1 + { child_comm: smbd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: postgres } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: dhclient } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: nm-dispatcher.a } hitcount: 8 + { child_comm: firefox } hitcount: 8 + { child_comm: dbus-daemon } hitcount: 8 + { child_comm: glib-pacrunner } hitcount: 10 + { child_comm: evolution } hitcount: 23 + + Totals: + Hits: 89 + Entries: 20 + Dropped: 0 + + If we want to pause the hist trigger, we can simply append :pause to + the command that started the trigger. Notice that the trigger info + displays as [paused]: + + # echo 'hist:key=child_comm:val=hitcount:size=256:pause' >> \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [paused] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: bash } hitcount: 3 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 10 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 20 + { child_comm: nm-dispatcher.a } hitcount: 20 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 199 + Entries: 21 + Dropped: 0 + + To manually continue having the trigger aggregate events, append + :cont instead. Notice that the trigger info displays as [active] + again, and the data has changed: + + # echo 'hist:key=child_comm:val=hitcount:size=256:cont' >> \ + /sys/kernel/debug/tracing/events/sched/sched_process_fork/trigger + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_fork/hist + # trigger info: hist:keys=child_comm:vals=hitcount:sort=hitcount:size=256 [active] + + { child_comm: dconf worker } hitcount: 1 + { child_comm: dconf worker } hitcount: 1 + { child_comm: kthreadd } hitcount: 1 + { child_comm: gdbus } hitcount: 1 + { child_comm: ibus-daemon } hitcount: 1 + { child_comm: Socket Thread } hitcount: 2 + { child_comm: evolution-alarm } hitcount: 2 + { child_comm: smbd } hitcount: 2 + { child_comm: whoopsie } hitcount: 3 + { child_comm: compiz } hitcount: 3 + { child_comm: evolution-sourc } hitcount: 4 + { child_comm: bash } hitcount: 5 + { child_comm: pool } hitcount: 5 + { child_comm: postgres } hitcount: 6 + { child_comm: firefox } hitcount: 8 + { child_comm: dhclient } hitcount: 11 + { child_comm: emacs } hitcount: 12 + { child_comm: dbus-daemon } hitcount: 22 + { child_comm: nm-dispatcher.a } hitcount: 22 + { child_comm: evolution } hitcount: 35 + { child_comm: glib-pacrunner } hitcount: 59 + + Totals: + Hits: 206 + Entries: 21 + Dropped: 0 + + The previous example showed how to start and stop a hist trigger by + appending 'pause' and 'continue' to the hist trigger command. A + hist trigger can also be started in a paused state by initially + starting the trigger with ':pause' appended. This allows you to + start the trigger only when you're ready to start collecting data + and not before. For example, you could start the trigger in a + paused state, then unpause it and do something you want to measure, + then pause the trigger again when done. + + Of course, doing this manually can be difficult and error-prone, but + it is possible to automatically start and stop a hist trigger based + on some condition, via the enable_hist and disable_hist triggers. + + For example, suppose we wanted to take a look at the relative + weights in terms of skb length for each callpath that leads to a + netif_receieve_skb event when downloading a decent-sized file using + wget. + + First we set up an initially paused stacktrace trigger on the + netif_receive_skb event: + + # echo 'hist:key=stacktrace:vals=len:pause' > \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + Next, we set up an 'enable_hist' trigger on the sched_process_exec + event, with an 'if filename==/usr/bin/wget' filter. The effect of + this new trigger is that it will 'unpause' the hist trigger we just + set up on netif_receive_skb if and only if it sees a + sched_process_exec event with a filename of '/usr/bin/wget'. When + that happens, all netif_receive_skb events are aggregated into a + hash table keyed on stacktrace: + + # echo 'enable_hist:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + The aggregation continues until the netif_receive_skb is paused + again, which is what the following disable_hist event does by + creating a similar setup on the sched_process_exit event, using the + filter 'comm==wget': + + # echo 'disable_hist:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + Whenever a process exits and the comm field of the disable_hist + trigger filter matches 'comm==wget', the netif_receive_skb hist + trigger is disabled. + + The overall effect is that netif_receive_skb events are aggregated + into the hash table for only the duration of the wget. Executing a + wget command and then listing the 'hist' file will display the + output generated by the wget command: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_receive+0xc8/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 85 len: 28884 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + dev_gro_receive+0x23a/0x360 + napi_gro_receive+0x30/0x100 + ieee80211_deliver_skb+0xd6/0x270 [mac80211] + ieee80211_rx_handlers+0xccf/0x22f0 [mac80211] + ieee80211_prepare_and_rx_handle+0x4e7/0xc40 [mac80211] + ieee80211_rx+0x31d/0x900 [mac80211] + iwlagn_rx_reply_rx+0x3db/0x6f0 [iwldvm] + iwl_rx_dispatch+0x8e/0xf0 [iwldvm] + iwl_pcie_irq_handler+0xe3c/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + } hitcount: 98 len: 664329 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + process_backlog+0xa8/0x150 + net_rx_action+0x15d/0x340 + __do_softirq+0x114/0x2c0 + do_softirq_own_stack+0x1c/0x30 + do_softirq+0x65/0x70 + __local_bh_enable_ip+0xb5/0xc0 + ip_finish_output+0x1f4/0x840 + ip_output+0x6b/0xc0 + ip_local_out_sk+0x31/0x40 + ip_send_skb+0x1a/0x50 + udp_send_skb+0x173/0x2a0 + udp_sendmsg+0x2bf/0x9f0 + inet_sendmsg+0x64/0xa0 + sock_sendmsg+0x3d/0x50 + } hitcount: 115 len: 13030 + { stacktrace: + __netif_receive_skb_core+0x46d/0x990 + __netif_receive_skb+0x18/0x60 + netif_receive_skb_internal+0x23/0x90 + napi_gro_complete+0xa4/0xe0 + napi_gro_flush+0x6d/0x90 + iwl_pcie_irq_handler+0x92a/0x12f0 [iwlwifi] + irq_thread_fn+0x20/0x50 + irq_thread+0x11f/0x150 + kthread+0xd2/0xf0 + ret_from_fork+0x42/0x70 + } hitcount: 934 len: 5512212 + + Totals: + Hits: 1232 + Entries: 4 + Dropped: 0 + + The above shows all the netif_receive_skb callpaths and their total + lengths for the duration of the wget command. + + The 'clear' hist trigger param can be used to clear the hash table. + Suppose we wanted to try another run of the previous example but + this time also wanted to see the complete list of events that went + into the histogram. In order to avoid having to set everything up + again, we can just clear the histogram first: + + # echo 'hist:key=stacktrace:vals=len:clear' >> \ + /sys/kernel/debug/tracing/events/net/netif_receive_skb/trigger + + Just to verify that it is in fact cleared, here's what we now see in + the hist file: + + # cat /sys/kernel/debug/tracing/events/net/netif_receive_skb/hist + # trigger info: hist:keys=stacktrace:vals=len:sort=hitcount:size=2048 [paused] + + Totals: + Hits: 0 + Entries: 0 + Dropped: 0 + + Since we want to see the detailed list of every netif_receive_skb + event occurring during the new run, which are in fact the same + events being aggregated into the hash table, we add some additional + 'enable_event' events to the triggering sched_process_exec and + sched_process_exit events as such: + + # echo 'enable_event:net:netif_receive_skb if filename==/usr/bin/wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + + # echo 'disable_event:net:netif_receive_skb if comm==wget' > \ + /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + + If you read the trigger files for the sched_process_exec and + sched_process_exit triggers, you should see two triggers for each: + one enabling/disabling the hist aggregation and the other + enabling/disabling the logging of events: + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_exec/trigger + enable_event:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + enable_hist:net:netif_receive_skb:unlimited if filename==/usr/bin/wget + + # cat /sys/kernel/debug/tracing/events/sched/sched_process_exit/trigger + enable_event:net:netif_receive_skb:unlimited if comm==wget + disable_hist:net:netif_receive_skb:unlimited if comm==wget + + In other words, whenever either of the sched_process_exec or + sched_process_exit events is hit and matches 'wget', it enables or + disables both the histogram and the event log, and what you end up + with is a hash table and set of events just covering the specified + duration. Run the wget command again: + + $ wget https://www.kernel.org/pub/linux/kernel/v3.x/patch-3.19.xz + + Displaying the 'hist' file should show something similar to what you + saw in the last run, but this time you should also see the + individual events in the trace file: + + # cat /sys/kernel/debug/tracing/trace + + # tracer: nop + # + # entries-in-buffer/entries-written: 183/1426 #P:4 + # + # _-----=> irqs-off + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / delay + # TASK-PID CPU# |||| TIMESTAMP FUNCTION + # | | | |||| | | + wget-15108 [000] ..s1 31769.606929: netif_receive_skb: dev=lo skbaddr=ffff88009c353100 len=60 + wget-15108 [000] ..s1 31769.606999: netif_receive_skb: dev=lo skbaddr=ffff88009c353200 len=60 + dnsmasq-1382 [000] ..s1 31769.677652: netif_receive_skb: dev=lo skbaddr=ffff88009c352b00 len=130 + dnsmasq-1382 [000] ..s1 31769.685917: netif_receive_skb: dev=lo skbaddr=ffff88009c352200 len=138 + ##### CPU 2 buffer started #### + irq/29-iwlwifi-559 [002] ..s. 31772.031529: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433d00 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.031572: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432200 len=1500 + irq/29-iwlwifi-559 [002] ..s. 31772.032196: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433100 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.032761: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d433000 len=2948 + irq/29-iwlwifi-559 [002] ..s. 31772.033220: netif_receive_skb: dev=wlan0 skbaddr=ffff88009d432e00 len=1500 + . + . + . -- 2.8.0.rc3