| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1461255121-5245-6-git-send-email-jonathanh@nvidia.com> Date: Thu, 21 Apr 2016 17:12:01 +0100 From: Jon Hunter <jonathanh@...dia.com> To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org> CC: <linux-kernel@...r.kernel.org>, <linux-tegra@...r.kernel.org>, Thierry Reding <treding@...dia.com>, Jon Hunter <jonathanh@...dia.com> Subject: [PATCH 5/5] regulator: helpers: Ensure bypass register field matches ON value When checking bypass state for a regulator, we check to see if any bits in the bypass mask are set. For most cases this is fine because there is typically, only a single bit used to determine if the regulator is in bypass. However, for some regulators, such as LDO6 on AS3722, the bypass state is indicate by a value rather than a single bit. Therefore, when checking the bypass state, check that the bypass field matches the ON value. Signed-off-by: Jon Hunter <jonathanh@...dia.com> --- drivers/regulator/helpers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index b1e32e7482e9..bcf38fd5106a 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -460,7 +460,7 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) if (ret != 0) return ret; - *enable = val & rdev->desc->bypass_mask; + *enable = (val & rdev->desc->bypass_mask) == rdev->desc->bypass_val_on; return 0; } -- 2.1.4
Powered by blists - more mailing lists