| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 21 Apr 2016 16:32:44 +0000
From: Appana Durga Kedareswara Rao <appana.durga.rao@...inx.com>
To: Soren Brinkmann <sorenb@...inx.com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"pawel.moll@....com" <pawel.moll@....com>,
"mark.rutland@....com" <mark.rutland@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
Michal Simek <michals@...inx.com>,
"vinod.koul@...el.com" <vinod.koul@...el.com>,
"dan.j.williams@...el.com" <dan.j.williams@...el.com>,
"moritz.fischer@...us.com" <moritz.fischer@...us.com>,
"laurent.pinchart@...asonboard.com"
<laurent.pinchart@...asonboard.com>,
"luis@...ethencourt.com" <luis@...ethencourt.com>,
Anirudha Sarangi <anirudh@...inx.com>,
Punnaiah Choudary Kalluri <punnaia@...inx.com>,
Shubhrajyoti Datta <shubhraj@...inx.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"dmaengine@...r.kernel.org" <dmaengine@...r.kernel.org>
Subject: RE: [PATCH v3 3/3] dmaengine: vdma: Add clock support
Hi Soren,
> -----Original Message-----
> From: Sören Brinkmann [mailto:soren.brinkmann@...inx.com]
> Sent: Thursday, April 21, 2016 9:52 PM
> To: Appana Durga Kedareswara Rao <appanad@...inx.com>
> Cc: robh+dt@...nel.org; pawel.moll@....com; mark.rutland@....com;
> ijc+devicetree@...lion.org.uk; galak@...eaurora.org; Michal Simek
> <michals@...inx.com>; vinod.koul@...el.com; dan.j.williams@...el.com;
> Appana Durga Kedareswara Rao <appanad@...inx.com>;
> moritz.fischer@...us.com; laurent.pinchart@...asonboard.com;
> luis@...ethencourt.com; Anirudha Sarangi <anirudh@...inx.com>; Punnaiah
> Choudary Kalluri <punnaia@...inx.com>; Shubhrajyoti Datta
> <shubhraj@...inx.com>; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> dmaengine@...r.kernel.org
> Subject: Re: [PATCH v3 3/3] dmaengine: vdma: Add clock support
>
> On Thu, 2016-04-21 at 16:08:38 +0530, Kedareswara rao Appana wrote:
> > Added basic clock support for axi dma's.
> > The clocks are requested at probe and released at remove.
> >
> > Reviewed-by: Shubhrajyoti Datta <shubhraj@...inx.com>
> > Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
> > ---
> > Changes for v3:
> > ---> Added clock support for all the AXI DMA's.
> > ---> Fixed clk_unprepare leak during probe fail as suggested by Moritz.
> > ---> Fixed comment driver specifically asks for the clocks it needs
> > ---> and return
> > an error if a mandatory clock is missing as suggested by soren.
> > Changes for v2:
> > ---> None.
> >
> > drivers/dma/xilinx/xilinx_vdma.c | 225
> > ++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 223 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_vdma.c
> > b/drivers/dma/xilinx/xilinx_vdma.c
> > index 5bfaa32..41bb5b3 100644
> > --- a/drivers/dma/xilinx/xilinx_vdma.c
> > +++ b/drivers/dma/xilinx/xilinx_vdma.c
> > @@ -44,6 +44,7 @@
> > #include <linux/of_platform.h>
> > #include <linux/of_irq.h>
> > #include <linux/slab.h>
> > +#include <linux/clk.h>
> >
> > #include "../dmaengine.h"
> >
> > @@ -344,6 +345,9 @@ struct xilinx_dma_chan {
> >
> > struct dma_config {
> > enum xdma_ip_type dmatype;
> > + int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
> > + struct clk **tx_clk, struct clk **txs_clk,
> > + struct clk **rx_clk, struct clk **rxs_clk);
> > };
> >
> > /**
> > @@ -365,7 +369,13 @@ struct xilinx_dma_device {
> > bool has_sg;
> > u32 flush_on_fsync;
> > bool ext_addr;
> > + struct platform_device *pdev;
> > const struct dma_config *dma_config;
> > + struct clk *axi_clk;
> > + struct clk *tx_clk;
> > + struct clk *txs_clk;
> > + struct clk *rx_clk;
> > + struct clk *rxs_clk;
> > };
>
> the struct members could be documented
Ok Will document in the next version...
>
> >
> > /* Macros */
> > @@ -1757,6 +1767,200 @@ static void xilinx_dma_chan_remove(struct
> xilinx_dma_chan *chan)
> > list_del(&chan->common.device_node);
> > }
> >
> > +static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
> > + struct clk **tx_clk, struct clk **rx_clk,
> > + struct clk **sg_clk, struct clk **tmp_clk) {
> > + int err;
> > +
> > + *tmp_clk = NULL;
> > +
> > + *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
> > + if (IS_ERR(*axi_clk)) {
> > + err = PTR_ERR(*axi_clk);
> > + dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
> > + if (IS_ERR(*tx_clk))
> > + *tx_clk = NULL;
> > +
> > + *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
> > + if (IS_ERR(*rx_clk))
> > + *rx_clk = NULL;
> > +
> > + *sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
> > + if (IS_ERR(*sg_clk))
> > + *sg_clk = NULL;
> > +
> > +
> > + err = clk_prepare_enable(*axi_clk);
>
> Should this be called if you know that the pointer might be NULL?
It is a mandatory clock and if this clk is not there in DT I am already returning error...
I didn't get your question could you please elaborate???
>
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + err = clk_prepare_enable(*tx_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
> > + goto err_disable_axiclk;
> > + }
> > +
> > + err = clk_prepare_enable(*rx_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable txs_clk (%u)\n", err);
> > + goto err_disable_txclk;
> > + }
> > +
> > + err = clk_prepare_enable(*sg_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable rxs_clk (%u)\n", err);
> > + goto err_disable_rxclk;
> > + }
> > +
> > + return 0;
> > +
> > +err_disable_rxclk:
> > + clk_disable_unprepare(*rx_clk);
> > +err_disable_txclk:
> > + clk_disable_unprepare(*tx_clk);
> > +err_disable_axiclk:
> > + clk_disable_unprepare(*axi_clk);
> > +
> > + return err;
> > +}
> > +
> > +static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
> > + struct clk **dev_clk, struct clk **tmp_clk,
> > + struct clk **tmp1_clk, struct clk **tmp2_clk) {
> > + int err;
> > +
> > + *tmp_clk = NULL;
> > + *tmp1_clk = NULL;
> > + *tmp2_clk = NULL;
> > +
> > + *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
> > + if (IS_ERR(*axi_clk)) {
> > + err = PTR_ERR(*axi_clk);
> > + dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + *dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
> > + if (IS_ERR(*dev_clk))
> > + *dev_clk = NULL;
>
> This is a required clock according to binding but a failure is ignored here.
Hmm nice catch will fix in next version...
>
> > +
> > +
> > + err = clk_prepare_enable(*axi_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + err = clk_prepare_enable(*dev_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
> > + goto err_disable_axiclk;
> > + }
> > +
> > +
> > + return 0;
> > +
> > +err_disable_axiclk:
> > + clk_disable_unprepare(*axi_clk);
> > +
> > + return err;
> > +}
> > +
> > +static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
> > + struct clk **tx_clk, struct clk **txs_clk,
> > + struct clk **rx_clk, struct clk **rxs_clk) {
> > + int err;
> > +
> > + *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
> > + if (IS_ERR(*axi_clk)) {
> > + err = PTR_ERR(*axi_clk);
> > + dev_err(&pdev->dev, "failed to get axi_aclk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
> > + if (IS_ERR(*tx_clk))
> > + *tx_clk = NULL;
> > +
> > + *txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
> > + if (IS_ERR(*txs_clk))
> > + *txs_clk = NULL;
> > +
> > + *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
> > + if (IS_ERR(*rx_clk))
> > + *rx_clk = NULL;
> > +
> > + *rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
> > + if (IS_ERR(*rxs_clk))
> > + *rxs_clk = NULL;
> > +
> > +
> > + err = clk_prepare_enable(*axi_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable axi_clk (%u)\n", err);
> > + return err;
> > + }
> > +
> > + err = clk_prepare_enable(*tx_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
> > + goto err_disable_axiclk;
> > + }
> > +
> > + err = clk_prepare_enable(*txs_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable txs_clk (%u)\n", err);
> > + goto err_disable_txclk;
> > + }
> > +
> > + err = clk_prepare_enable(*rx_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable rx_clk (%u)\n", err);
> > + goto err_disable_txsclk;
> > + }
> > +
> > + err = clk_prepare_enable(*rxs_clk);
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to enable rxs_clk (%u)\n", err);
> > + goto err_disable_rxclk;
> > + }
> > +
> > + return 0;
> > +
> > +err_disable_rxclk:
> > + clk_disable_unprepare(*rx_clk);
> > +err_disable_txsclk:
> > + clk_disable_unprepare(*txs_clk);
> > +err_disable_txclk:
> > + clk_disable_unprepare(*tx_clk);
> > +err_disable_axiclk:
> > + clk_disable_unprepare(*axi_clk);
> > +
> > + return err;
> > +}
> > +
> > +static void xdma_disable_allclks(struct xilinx_dma_device *xdev) {
> > + if (!IS_ERR(xdev->rxs_clk))
>
> The init functions set the optional clocks to NULL if not present. So, these
> pointers should be valid or NULL, but not an error pointer (I think NULL is not
> considered an error pointer as there is a IS_ERR_OR_NULL macro).
Ok will remove IS_ERR checks...
>
> > + clk_disable_unprepare(xdev->rxs_clk);
> > + if (!IS_ERR(xdev->rx_clk))
> > + clk_disable_unprepare(xdev->rx_clk);
> > + if (!IS_ERR(xdev->txs_clk))
> > + clk_disable_unprepare(xdev->txs_clk);
> > + if (!IS_ERR(xdev->tx_clk))
> > + clk_disable_unprepare(xdev->tx_clk);
> > + clk_disable_unprepare(xdev->axi_clk);
> > +}
> > +
> > /**
> > * xilinx_dma_chan_probe - Per Channel Probing
> > * It get channel features from the device tree entry and @@ -1900,14
> > +2104,17 @@ static struct dma_chan *of_dma_xilinx_xlate(struct
> > of_phandle_args *dma_spec,
> >
> > static const struct dma_config axidma_config = {
> > .dmatype = XDMA_TYPE_AXIDMA,
> > + .clk_init = axidma_clk_init,
> > };
> >
> > static const struct dma_config axicdma_config = {
> > .dmatype = XDMA_TYPE_CDMA,
> > + .clk_init = axicdma_clk_init,
> > };
> >
> > static const struct dma_config axivdma_config = {
> > .dmatype = XDMA_TYPE_VDMA,
> > + .clk_init = axivdma_clk_init,
> > };
> >
> > static const struct of_device_id xilinx_dma_of_ids[] = { @@ -1926,9
> > +2133,13 @@ MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
> > */
> > static int xilinx_dma_probe(struct platform_device *pdev) {
> > + int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
> > + struct clk **, struct clk **, struct clk **)
> > + = axivdma_clk_init;
> > struct device_node *node = pdev->dev.of_node;
> > struct xilinx_dma_device *xdev;
> > struct device_node *child, *np = pdev->dev.of_node;
> > + struct clk *axi_clk, *tx_clk, *txs_clk, *rx_clk, *rxs_clk;
>
> Are these local vars ever transferred into the struct xilinx_dma_device (I actually
> think you can directly use the struct instead of these locals).
Ok will fix in the next version...
Regards,
Kedar.
>
> > struct resource *io;
> > u32 num_frames, addr_width;
> > int i, err;
> > @@ -1943,10 +2154,16 @@ static int xilinx_dma_probe(struct
> platform_device *pdev)
> > const struct of_device_id *match;
> >
> > match = of_match_node(xilinx_dma_of_ids, np);
> > - if (match && match->data)
> > + if (match && match->data) {
> > xdev->dma_config = match->data;
> > + clk_init = xdev->dma_config->clk_init;
> > + }
> > }
> >
> > + err = clk_init(pdev, &axi_clk, &tx_clk, &txs_clk, &rx_clk, &rxs_clk);
> > + if (err)
> > + return err;
> > +
> > /* Request and map I/O memory */
> > io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > xdev->regs = devm_ioremap_resource(&pdev->dev, io); @@ -2019,7
> > +2236,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
> > for_each_child_of_node(node, child) {
> > err = xilinx_dma_chan_probe(xdev, child);
> > if (err < 0)
> > - goto error;
> > + goto disable_clks;
> > }
> >
> > if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) { @@ -2043,6
> > +2260,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
> >
> > return 0;
> >
> > +disable_clks:
> > + xdma_disable_allclks(xdev);
> > error:
> > for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
> > if (xdev->chan[i])
> > @@ -2070,6 +2289,8 @@ static int xilinx_dma_remove(struct
> platform_device *pdev)
> > if (xdev->chan[i])
> > xilinx_dma_chan_remove(xdev->chan[i]);
> >
> > + xdma_disable_allclks(xdev);
> > +
> > return 0;
> > }
>
> Sören
Powered by blists - more mailing lists