linux-kernel - [PATCH v1 20/23] ata: sata_dwc_460ex: tidy up sata_dwc_clear

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1461262544-115408-21-git-send-email-andriy.shevchenko@linux.intel.com>
Date:	Thu, 21 Apr 2016 21:15:41 +0300
From:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:	Tejun Heo <tj@...nel.org>, linux-ide@...r.kernel.org,
	Rob Herring <robh+dt@...nel.org>,
	linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	Christian Lamparter <chunkeey@...glemail.com>,
	Måns Rullgård <mans@...sr.com>,
	Julian Margetson <runaway@...dw.ms>
Subject: [PATCH v1 20/23] ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()

From: Mans Rullgard <mans@...sr.com>

This consolidates the reads from each of the if/else branches
to one place making the code a lot nicer to look at.

Signed-off-by: Mans Rullgard <mans@...sr.com>
---
 drivers/ata/sata_dwc_460ex.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 2029f43..0ef72e4 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -729,15 +729,14 @@ DONE:
 static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
 {
 	struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+	u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);
 
 	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
-		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-			SATA_DWC_DMACR_RX_CLEAR(
-				sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr)));
+		dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
 	} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
-		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
-			SATA_DWC_DMACR_TX_CLEAR(
-				sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr)));
+		dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
+		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
 	} else {
 		/*
 		 * This should not happen, it indicates the driver is out of
@@ -745,8 +744,7 @@ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
 		 */
 		dev_err(hsdev->dev,
 			"%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
-			__func__, tag, hsdevp->dma_pending[tag],
-			sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
+			__func__, tag, hsdevp->dma_pending[tag], dmacr);
 		sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
 				SATA_DWC_DMACR_TXRXCH_CLEAR);
 	}
-- 
2.8.0.rc3