[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1461262544-115408-1-git-send-email-andriy.shevchenko@linux.intel.com>
Date: Thu, 21 Apr 2016 21:15:21 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Tejun Heo <tj@...nel.org>, linux-ide@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Christian Lamparter <chunkeey@...glemail.com>,
Måns Rullgård <mans@...sr.com>,
Julian Margetson <runaway@...dw.ms>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v1 00/23] ata: sata_dwc_460ex: make it working again
The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
Besides that we expecting new board support coming with the same SATA IP but
with different DMA.
This series is targetting the following things:
- a few bug fixes to the original driver
- a part to fix the DMA engine usage and in particularly dw_dmac driver
- move driver to use generic PHY and "dmas" property which leads to update in DTS
The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
boards. In any case I ask Christian, Måns, and Julian to independently test and
provide Tested-by tag or error report.
Series depends on previously published but not yet fully applied series [1].
[1] http://www.spinics.net/lists/kernel/msg2239735.html
Andy Shevchenko (11):
ata: sata_dwc_460ex: set dma_boundary to 0x1fff
ata: sata_dwc_460ex: burst size must be in items not bytes
ata: sata_dwc_460ex: DMA is always a flow controller
ata: sata_dwc_460ex: select only core part of DMA driver
ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
ata: sata_dwc_460ex: supply physical address of FIFO to DMA
ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
ata: sata_dwc_460ex: use devm_ioremap
ata: sata_dwc_460ex: make debug messages neat
powerpc/4xx: Device tree update for the 460ex DWC SATA
Christian Lamparter (1):
ata: sata_dwc_460ex: fix crash on offline links without an attached
drive
Mans Rullgard (11):
ata: sata_dwc_460ex: remove incorrect locking
ata: sata_dwc_460ex: skip dma setup for non-dma commands
ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
ata: sata_dwc_460ex: add phy support
ata: sata_dwc_460ex: get rid of global data
ata: sata_dwc_460ex: remove empty libata callback
ata: sata_dwc_460ex: get rid of some pointless casts
ata: sata_dwc_460ex: get rid of incorrect cast
ata: sata_dwc_460ex: add __iomem to register base pointer
ata: sata_dwc_460ex: use readl/writel_relaxed()
ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
arch/powerpc/boot/dts/canyonlands.dts | 15 +-
drivers/ata/Kconfig | 12 +-
drivers/ata/sata_dwc_460ex.c | 554 +++++++++++++++++-----------------
3 files changed, 307 insertions(+), 274 deletions(-)
--
2.8.0.rc3
Powered by blists - more mailing lists