linux-kernel - [PATCH 5/6] rtc: rv3029: enable AE_x bits on set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 21 Apr 2016 20:24:18 +0200
From:	Mylène Josserand 
	<mylene.josserand@...e-electrons.com>
To:	alexandre.belloni@...e-electrons.com, rtc-linux@...glegroups.com
Cc:	Alessandro Zummo <a.zummo@...ertech.it>,
	linux-kernel@...r.kernel.org, mylene.josserand@...e-electrons.com
Subject: [PATCH 5/6] rtc: rv3029: enable AE_x bits on set_alarm

The RTC RV3029 handles different types of alarms : seconds, minutes, ...
These alarms can be enabled or disabled individually using an AE_x bit
which is the last bit (BIT(7)) on each alarm registers.

To prepare the alarm IRQ support, the current code enables all the alarm
types by setting each AE_x to 1.
It also fixes month and weekday errors : it was performing -1 instead
of +1.

Signed-off-by: Mylène Josserand <mylene.josserand@...e-electrons.com>
---
 drivers/rtc/rtc-rv3029c2.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index a849005..42de1a3 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -76,6 +76,7 @@
 #define RV3029_A_DW			0x14
 #define RV3029_A_MO			0x15
 #define RV3029_A_YR			0x16
+#define RV3029_A_AE_X			BIT(7)
 #define RV3029_ALARM_SECTION_LEN	0x07
 
 /* timer section */
@@ -436,14 +437,22 @@ static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 		dev_err(dev, "%s: reading SR failed\n", __func__);
 		return -EIO;
 	}
-	regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec & 0x7f);
-	regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min & 0x7f);
-	regs[RV3029_A_HR - RV3029_A_SC] = bin2bcd(tm->tm_hour & 0x3f);
-	regs[RV3029_A_DT - RV3029_A_SC] = bin2bcd(tm->tm_mday & 0x3f);
-	regs[RV3029_A_MO - RV3029_A_SC] = bin2bcd((tm->tm_mon & 0x1f) - 1);
-	regs[RV3029_A_DW - RV3029_A_SC] = bin2bcd((tm->tm_wday & 7) - 1);
-	regs[RV3029_A_YR - RV3029_A_SC] = bin2bcd((tm->tm_year & 0x7f) - 100);
 
+	/* Activate all the alarms with AE_x bit */
+	regs[RV3029_A_SC - RV3029_A_SC] = (bin2bcd(tm->tm_sec)) | RV3029_A_AE_X;
+	regs[RV3029_A_MN - RV3029_A_SC] = (bin2bcd(tm->tm_min)) | RV3029_A_AE_X;
+	regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour & 0x3f))
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday & 0x3f))
+		| RV3029_A_AE_X;
+	regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd((tm->tm_mon & 0x1f) + 1))
+		| RV3029_A_AE_X;
+	regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd((tm->tm_wday & 7) + 1))
+		| RV3029_A_AE_X;
+	regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd((tm->tm_year) - 100))
+		| RV3029_A_AE_X;
+
+	/* Write the alarm */
 	ret = rv3029_write_regs(dev, RV3029_A_SC, regs,
 				RV3029_ALARM_SECTION_LEN);
 	if (ret < 0)
-- 
2.8.0.rc3