| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1461324194-5789-2-git-send-email-chaitra.basappa@broadcom.com>
Date: Fri, 22 Apr 2016 16:53:10 +0530
From: Chaitra P B <chaitra.basappa@...adcom.com>
To: jejb@...nel.org, hch@...radead.org
Cc: martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
JBottomley@...allels.com, Sathya.Prakash@...adcom.com,
suganath-prabu.subramani@...adcom.com,
linux-kernel@...r.kernel.org,
Chaitra P B <chaitra.basappa@...adcom.com>
Subject: [PATCH 1/5] mpt3sas: Update MPI header to 2.00.42
Updated MPI version and MPI header files.
ChangeList:
* Added SATADeviceWaitTime to SAS IO Unit Page 4
* Added EEDPObservedValue added to SCSI IO Reply message
* Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT
Signed-off-by: Chaitra P B <chaitra.basappa@...adcom.com>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 7 +++++--
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 18 +++++++++++-----
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 15 +++++++++++---
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 40 +++++++++++++++++++++++++++++++-----
4 files changed, 65 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index dfad5b8..a9a659f 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.39
+ * mpi2.h Version: 02.00.42
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -100,6 +100,9 @@
* Added MPI2_DIAG_SBR_RELOAD.
* 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT.
* 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT
+ * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT
* --------------------------------------------------------------------------
*/
@@ -139,7 +142,7 @@
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x27)
+#define MPI2_HEADER_VERSION_UNIT (0x2A)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 9cf09bf..95356a8 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.33
+ * mpi2_cnfg.h Version: 02.00.35
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -183,9 +183,12 @@
* Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
* Added AdapterOrderAux fields to BIOS Page 3.
* 03-16-15 02.00.31 Updated for MPI v2.6.
+ * Added Flags field to IO Unit Page 7.
* Added new SAS Phy Event codes
* 05-25-15 02.00.33 Added more defines for the BiosOptions field of
* MPI2_CONFIG_PAGE_BIOS_1.
+ * 08-25-15 02.00.34 Bumped Header Version.
+ * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
* --------------------------------------------------------------------------
*/
@@ -958,13 +961,16 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
U8 Reserved3; /*0x17 */
U32 BoardPowerRequirement; /*0x18 */
U32 PCISlotPowerAllocation; /*0x1C */
- U32 Reserved6; /* 0x20 */
- U32 Reserved7; /* 0x24 */
+/* reserved prior to MPI v2.6 */
+ U8 Flags; /* 0x20 */
+ U8 Reserved6; /* 0x21 */
+ U16 Reserved7; /* 0x22 */
+ U32 Reserved8; /* 0x24 */
} MPI2_CONFIG_PAGE_IO_UNIT_7,
*PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
-#define MPI2_IOUNITPAGE7_PAGEVERSION (0x04)
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x05)
/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
#define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
@@ -1045,6 +1051,8 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
+/* defines for IO Unit Page 7 Flags field */
+#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01)
/*IO Unit Page 8 */
@@ -2271,7 +2279,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
U8
BootDeviceWaitTime; /*0x24 */
U8
- Reserved4; /*0x25 */
+ SATADeviceWaitTime; /*0x25 */
U16
Reserved5; /*0x26 */
U8
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index c38f624..bba56b6 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -6,7 +6,7 @@
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.17
+ * mpi2_init.h Version: 02.00.20
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -51,6 +51,9 @@
* Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
* Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
* MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
+ * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
+ * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
+ * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
* --------------------------------------------------------------------------
*/
@@ -359,8 +362,14 @@ typedef struct _MPI2_SCSI_IO_REPLY {
U16 TaskTag; /*0x20 */
U16 SCSIStatusQualifier; /* 0x22 */
U32 BidirectionalTransferCount; /*0x24 */
- U32 EEDPErrorOffset; /*0x28 *//*MPI 2.5 only; Reserved in MPI 2.0*/
- U32 Reserved6; /*0x2C */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U32 EEDPErrorOffset; /* 0x28 */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U16 EEDPObservedAppTag; /* 0x2C */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U16 EEDPObservedGuard; /* 0x2E */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+ U32 EEDPObservedRefTag; /* 0x30 */
} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index cf510ed..8bae305 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.26
+ * mpi2_ioc.h Version: 02.00.27
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -134,9 +134,13 @@
* Added Encrypted Hash Extended Image.
* 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* 11-18-14 02.00.25 Updated copyright information.
- * 03-16-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
+ * 03-16-15 02.00.26 Updated for MPI v2.6.
+ * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
+ * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
+ * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
+ * 08-25-15 02.00.27 Added IC ARCH Class based signature defines
* --------------------------------------------------------------------------
*/
@@ -168,7 +172,7 @@ typedef struct _MPI2_IOC_INIT_REQUEST {
U16 MsgVersion; /*0x0C */
U16 HeaderVersion; /*0x0E */
U32 Reserved5; /*0x10 */
- U16 Reserved6; /*0x14 */
+ U16 ConfigurationFlags; /* 0x14 */
U8 HostPageSize; /*0x16 */
U8 HostMSIxVectors; /*0x17 */
U16 Reserved8; /*0x18 */
@@ -516,6 +520,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
#define MPI2_EVENT_HOST_MESSAGE (0x0028)
#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
+#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
@@ -580,7 +585,7 @@ typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
-/*Power Performance Change Event */
+/*Power Performance Change Event data */
typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
U8 CurrentPowerMode; /*0x00 */
@@ -605,6 +610,21 @@ typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
+/* Active Cable Exception Event data */
+
+typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
+ U32 ActiveCablePowerRequirement; /* 0x00 */
+ U8 ReasonCode; /* 0x04 */
+ U8 ReceptacleID; /* 0x05 */
+ U16 Reserved1; /* 0x06 */
+} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+ Mpi26EventDataActiveCableExcept_t,
+ *pMpi26EventDataActiveCableExcept_t;
+
+/* defines for ReasonCode field */
+#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+
/*Hard Reset Received Event data */
typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
@@ -1366,7 +1386,16 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
/*Signature0 field */
#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
-#define MPI26_FW_HEADER_SIGNATURE0 (0x5AEAA55A)
+/* Last byte is defined by architecture */
+#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
+/* legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
+#define MPI26_FW_HEADER_SIGNATURE0_3516 \
+ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
/*Signature1 field */
#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
@@ -1778,6 +1807,7 @@ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
+#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09)
#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
--
1.8.3.1
Powered by blists - more mailing lists