=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.04.23 11:26:53 =~=~=~=~=~=~=~=~=~=~=~= U-Boot 2015.a (May 16 2015 - 14:20:11) CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115) No Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter enabled 32 kB I-Cache 32 kB D-Cache Board: Sam460ex/cr, PCIe 4x + SATA-2 I2C: ready DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4) PCI: Bus Dev VenId DevId Class Int 00 04 1095 3512 0104 00 00 06 126f 0501 0380 00 PCIE1: successfully set as root-complex 02 00 1002 683f 0300 ff Net: ppc_4xx_eth0 FPGA: Revision 03 (2010-10-07) SM502: found PERMD2:not found VGA: 1 VESA: OK [ 0.000000] Using Canyonlands machine description [ 0.000000] Linux version 4.6.0-rc4-next-20160421-sam460ex-jm (root@julian-VirtualBox) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #2 PREEMPT Sat Apr 23 09:26:44 AST 2016 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: root=/dev/sdb2 rootdelay=10 console=ttyS0,115200 console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 2001648K/2097152K available (7424K kernel code, 316K rwdata, 3816K rodata, 240K init, 370K bss, 95504K reserved, 0K cma-reserved, 1310720K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs [ 0.000000] * 0xffa00000..0xffc00000 : consistent mem [ 0.000000] * 0xffa00000..0xffa00000 : early ioremap [ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0 [ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0 [ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0 [ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0 [ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns [ 0.000024] clocksource: timebase mult[dda520] shift[24] registered [ 0.000149] Console: colour dummy device 80x25 [ 0.000701] console [tty0] enabled [ 0.000735] pid_max: default: 32768 minimum: 301 [ 0.000846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003501] devtmpfs: initialized [ 0.006153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.006544] xor: measuring software checksum speed [ 0.016612] 8regs : 896.000 MB/sec [ 0.026438] 8regs_prefetch: 800.000 MB/sec [ 0.036484] 32regs : 1232.000 MB/sec [ 0.046564] 32regs_prefetch: 1084.000 MB/sec [ 0.046599] xor: using function: 32regs (1232.000 MB/sec) [ 0.046626] prandom: seed boundary self test passed [ 0.048680] prandom: 100 self tests passed [ 0.049389] NET: Registered protocol family 16 [ 0.054839] cpuidle: using governor ladder [ 0.056802] cpuidle: using governor menu [ 0.057205] 256k L2-cache enabled [ 0.057287] PCIE0: Port disabled via device-tree [ 0.057347] PCIE1: Checking link... [ 0.057364] PCIE1: Device detected, waiting for link... [ 0.057383] PCIE1: link is up ! [ 0.159657] PCI host bridge /plb/pciex@d20000000 (primary) ranges: [ 0.159707] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 [ 0.159744] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 [ 0.159775] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 [ 0.159812] 4xx PCI DMA offset set to 0x00000000 [ 0.159829] 4xx PCI DMA window base to 0x0000000000000000 [ 0.159848] DMA window size 0x0000000080000000 [ 0.159884] PCIE1: successfully set as root-complex [ 0.159977] PCI host bridge /plb/pci@c0ec00000 (primary) ranges: [ 0.160006] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 [ 0.160041] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 [ 0.160072] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 [ 0.160102] 4xx PCI DMA offset set to 0x00000000 [ 0.160119] 4xx PCI DMA window base to 0x0000000000000000 [ 0.160138] DMA window size 0x0000000080000000 [ 0.169685] PCI: Probing PCI hardware [ 0.170005] PCI host bridge to bus 0000:80 [ 0.170043] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff]) [ 0.170079] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff]) [ 0.170117] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff]) [ 0.170155] pci_bus 0000:80: root bus resource [bus 80-ff] [ 0.170281] PCI: Hiding 4xx host bridge resources 0000:80:00.0 [ 0.171448] pci 0000:80:00.0: PCI bridge to [bus 81-bf] [ 0.171759] PCI host bridge to bus 0001:00 [ 0.171792] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] [ 0.171818] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff]) [ 0.171855] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff]) [ 0.171893] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.172664] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.172709] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff] [ 0.172736] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff] [ 0.172767] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.172809] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit] [ 0.172848] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref] [ 0.172882] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit] [ 0.172920] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff] [ 0.172948] pci 0000:80:00.0: PCI bridge to [bus 81-bf] [ 0.172971] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff] [ 0.172997] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff] [ 0.173023] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.173120] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff] [ 0.173148] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff] [ 0.173175] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref] [ 0.173207] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff] [ 0.173234] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f] [ 0.173259] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017] [ 0.173284] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f] [ 0.173310] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023] [ 0.173335] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027] [ 0.237400] raid6: int32x1 gen() 300 MB/s [ 0.254364] raid6: int32x1 xor() 162 MB/s [ 0.271495] raid6: int32x2 gen() 390 MB/s [ 0.288548] raid6: int32x2 xor() 236 MB/s [ 0.305718] raid6: int32x4 gen() 437 MB/s [ 0.322740] raid6: int32x4 xor() 255 MB/s [ 0.339907] raid6: int32x8 gen() 277 MB/s [ 0.356885] raid6: int32x8 xor() 205 MB/s [ 0.356910] raid6: using algorithm int32x4 gen() 437 MB/s [ 0.356928] raid6: .... xor() 255 MB/s, rmw enabled [ 0.356947] raid6: using intx1 recovery algorithm [ 0.357451] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none [ 0.357496] vgaarb: loaded [ 0.357511] vgaarb: bridge control possible 0000:81:00.0 [ 0.357969] SCSI subsystem initialized [ 0.359092] usbcore: registered new interface driver usbfs [ 0.359222] usbcore: registered new interface driver hub [ 0.359350] usbcore: registered new device driver usb [ 0.359671] pps_core: LinuxPPS API ver. 1 registered [ 0.359701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.359797] PTP clock support registered [ 0.360777] EDAC MC: Ver: 3.0.0 [ 0.361939] Advanced Linux Sound Architecture Driver Initialized. [ 0.363172] clocksource: Switched to clocksource timebase [ 0.363408] FS-Cache: Loaded [ 0.363625] CacheFiles: Loaded [ 0.379929] NET: Registered protocol family 2 [ 0.380588] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.380719] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.381043] TCP: Hash tables configured (established 8192 bind 8192) [ 0.381786] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.381896] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.382328] NET: Registered protocol family 1 [ 0.382592] RPC: Registered named UNIX socket transport module. [ 0.382624] RPC: Registered udp transport module. [ 0.382641] RPC: Registered tcp transport module. [ 0.382659] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.383594] Could not remap bcsr [ 0.389981] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160) [ 0.392859] futex hash table entries: 256 (order: 0, 7168 bytes) [ 0.393465] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.413718] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.414344] fuse init (API version 7.24) [ 0.419421] async_tx: api initialized (async) [ 0.419516] bounce: pool size: 64 pages [ 0.419608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.419641] io scheduler noop registered [ 0.419807] io scheduler cfq registered (default) [ 0.422164] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.422269] crc32: self tests passed, processed 225944 bytes in 989276 nsec [ 0.423439] crc32c: CRC_LE_BITS = 64 [ 0.423465] crc32c: self tests passed, processed 225944 bytes in 494887 nsec [ 0.492728] crc32_combine: 8373 self tests passed [ 0.562174] crc32c_combine: 8373 self tests passed [ 0.562226] glob: 64 self-tests passed, 0 failed [ 0.661395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.662544] console [ttyS0] disabled [ 0.683750] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A [ 1.620899] console [ttyS0] enabled [ 1.645418] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A [ 1.655614] console [ttyS0] disabled [ 0.000000] Using Canyonlands machine description [ 0.000000] Linux version 4.6.0-rc4-next-20160421-sam460ex-jm (root@julian-VirtualBox) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #2 PREEMPT Sat Apr 23 09:26:44 AST 2016 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: root=/dev/sdb2 rootdelay=10 console=ttyS0,115200 console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 2001648K/2097152K available (7424K kernel code, 316K rwdata, 3816K rodata, 240K init, 370K bss, 95504K reserved, 0K cma-reserved, 1310720K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs [ 0.000000] * 0xffa00000..0xffc00000 : consistent mem [ 0.000000] * 0xffa00000..0xffa00000 : early ioremap [ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0 [ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0 [ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0 [ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0 [ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns [ 0.000024] clocksource: timebase mult[dda520] shift[24] registered [ 0.000149] Console: colour dummy device 80x25 [ 0.000701] console [tty0] enabled [ 0.000735] pid_max: default: 32768 minimum: 301 [ 0.000846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000873] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003501] devtmpfs: initialized [ 0.006153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.006544] xor: measuring software checksum speed [ 0.016612] 8regs : 896.000 MB/sec [ 0.026438] 8regs_prefetch: 800.000 MB/sec [ 0.036484] 32regs : 1232.000 MB/sec [ 0.046564] 32regs_prefetch: 1084.000 MB/sec [ 0.046599] xor: using function: 32regs (1232.000 MB/sec) [ 0.046626] prandom: seed boundary self test passed [ 0.048680] prandom: 100 self tests passed [ 0.049389] NET: Registered protocol family 16 [ 0.054839] cpuidle: using governor ladder [ 0.056802] cpuidle: using governor menu [ 0.057205] 256k L2-cache enabled [ 0.057287] PCIE0: Port disabled via device-tree [ 0.057347] PCIE1: Checking link... [ 0.057364] PCIE1: Device detected, waiting for link... [ 0.057383] PCIE1: link is up ! [ 0.159657] PCI host bridge /plb/pciex@d20000000 (primary) ranges: [ 0.159707] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 [ 0.159744] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 [ 0.159775] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 [ 0.159812] 4xx PCI DMA offset set to 0x00000000 [ 0.159829] 4xx PCI DMA window base to 0x0000000000000000 [ 0.159848] DMA window size 0x0000000080000000 [ 0.159884] PCIE1: successfully set as root-complex [ 0.159977] PCI host bridge /plb/pci@c0ec00000 (primary) ranges: [ 0.160006] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 [ 0.160041] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 [ 0.160072] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 [ 0.160102] 4xx PCI DMA offset set to 0x00000000 [ 0.160119] 4xx PCI DMA window base to 0x0000000000000000 [ 0.160138] DMA window size 0x0000000080000000 [ 0.169685] PCI: Probing PCI hardware [ 0.170005] PCI host bridge to bus 0000:80 [ 0.170043] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff]) [ 0.170079] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff]) [ 0.170117] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff]) [ 0.170155] pci_bus 0000:80: root bus resource [bus 80-ff] [ 0.170281] PCI: Hiding 4xx host bridge resources 0000:80:00.0 [ 0.171448] pci 0000:80:00.0: PCI bridge to [bus 81-bf] [ 0.171759] PCI host bridge to bus 0001:00 [ 0.171792] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] [ 0.171818] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff]) [ 0.171855] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff]) [ 0.171893] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.172664] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.172709] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff] [ 0.172736] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff] [ 0.172767] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.172809] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit] [ 0.172848] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref] [ 0.172882] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit] [ 0.172920] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff] [ 0.172948] pci 0000:80:00.0: PCI bridge to [bus 81-bf] [ 0.172971] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff] [ 0.172997] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff] [ 0.173023] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref] [ 0.173120] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff] [ 0.173148] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff] [ 0.173175] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref] [ 0.173207] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff] [ 0.173234] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f] [ 0.173259] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017] [ 0.173284] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f] [ 0.173310] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023] [ 0.173335] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027] [ 0.237400] raid6: int32x1 gen() 300 MB/s [ 0.254364] raid6: int32x1 xor() 162 MB/s [ 0.271495] raid6: int32x2 gen() 390 MB/s [ 0.288548] raid6: int32x2 xor() 236 MB/s [ 0.305718] raid6: int32x4 gen() 437 MB/s [ 0.322740] raid6: int32x4 xor() 255 MB/s [ 0.339907] raid6: int32x8 gen() 277 MB/s [ 0.356885] raid6: int32x8 xor() 205 MB/s [ 0.356910] raid6: using algorithm int32x4 gen() 437 MB/s [ 0.356928] raid6: .... xor() 255 MB/s, rmw enabled [ 0.356947] raid6: using intx1 recovery algorithm [ 0.357451] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none [ 0.357496] vgaarb: loaded [ 0.357511] vgaarb: bridge control possible 0000:81:00.0 [ 0.357969] SCSI subsystem initialized [ 0.359092] usbcore: registered new interface driver usbfs [ 0.359222] usbcore: registered new interface driver hub [ 0.359350] usbcore: registered new device driver usb [ 0.359671] pps_core: LinuxPPS API ver. 1 registered [ 0.359701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.359797] PTP clock support registered [ 0.360777] EDAC MC: Ver: 3.0.0 [ 0.361939] Advanced Linux Sound Architecture Driver Initialized. [ 0.363172] clocksource: Switched to clocksource timebase [ 0.363408] FS-Cache: Loaded [ 0.363625] CacheFiles: Loaded [ 0.379929] NET: Registered protocol family 2 [ 0.380588] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.380719] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 0.381043] TCP: Hash tables configured (established 8192 bind 8192) [ 0.381786] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 0.381896] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 0.382328] NET: Registered protocol family 1 [ 0.382592] RPC: Registered named UNIX socket transport module. [ 0.382624] RPC: Registered udp transport module. [ 0.382641] RPC: Registered tcp transport module. [ 0.382659] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.383594] Could not remap bcsr [ 0.389981] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160) [ 0.392859] futex hash table entries: 256 (order: 0, 7168 bytes) [ 0.393465] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.413718] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.414344] fuse init (API version 7.24) [ 0.419421] async_tx: api initialized (async) [ 0.419516] bounce: pool size: 64 pages [ 0.419608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.419641] io scheduler noop registered [ 0.419807] io scheduler cfq registered (default) [ 0.422164] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.422269] crc32: self tests passed, processed 225944 bytes in 989276 nsec [ 0.423439] crc32c: CRC_LE_BITS = 64 [ 0.423465] crc32c: self tests passed, processed 225944 bytes in 494887 nsec [ 0.492728] crc32_combine: 8373 self tests passed [ 0.562174] crc32c_combine: 8373 self tests passed [ 0.562226] glob: 64 self-tests passed, 0 failed [ 0.661395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.662544] console [ttyS0] disabled [ 0.683750] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A [ 1.620899] console [ttyS0] enabled [ 1.645418] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A [ 1.655614] console [ttyS0] disabled [ 1.659530] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550 [ 2.621341] console [ttyS0] enabled [ 2.625747] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550 [ 2.635484] Generic non-volatile memory driver v1.1 [ 2.640973] [drm] Initialized drm 1.1.0 20060810 [ 2.645924] [drm] radeon kernel modesetting enabled. [ 2.652014] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750). [ 2.660241] [drm] register mmio base: 0xe90000000 [ 2.665009] [drm] register mmio size: 262144 [ 3.001253] ATOM BIOS: C44501 [ 3.004549] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 3.013476] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF [ 3.021168] [drm] Detected VRAM RAM=1024M, BAR=256M [ 3.026065] [drm] RAM width 128bits DDR [ 3.030094] [TTM] Zone kernel: Available graphics memory: 378440 kiB [ 3.036585] [TTM] Zone highmem: Available graphics memory: 1033800 kiB [ 3.043142] [TTM] Initializing pool allocator [ 3.047545] [TTM] Initializing DMA pool allocator [ 3.052369] [drm] radeon: 1024M of VRAM memory ready [ 3.057378] [drm] radeon: 2048M of GTT memory ready. [ 3.062408] [drm] Loading verde Microcode [ 3.066469] [drm] Internal thermal controller with fan control [ 3.072623] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0 [ 3.121797] [drm] radeon: dpm initialized [ 3.128222] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 3.134469] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 3.151139] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0 [ 3.210767] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000). [ 3.218077] radeon 0000:81:00.0: WB enabled [ 3.222320] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xee962c00 [ 3.232441] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xee962c04 [ 3.242562] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xee962c08 [ 3.252683] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xee962c0c [ 3.262805] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xee962c10 [ 3.304324] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18 [ 3.341458] radeon 0000:81:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xee962c18 [ 3.351618] radeon 0000:81:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xee962c1c [ 3.361759] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.368404] [drm] Driver supports precise vblank timestamp query. [ 3.374523] radeon 0000:81:00.0: radeon: MSI limited to 32-bit [ 3.380446] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160) [ 3.388716] radeon 0000:81:00.0: radeon: using MSI. [ 3.393673] [drm] radeon: irq initialized. [ 4.152902] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD) [ 4.161744] radeon 0000:81:00.0: disabling GPU acceleration [ 4.370696] [drm] Radeon Display Connectors [ 4.375369] [drm] Connector 0: [ 4.378506] [drm] HDMI-A-1 [ 4.381460] [drm] HPD4 [ 4.384046] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 4.391495] [drm] Encoders: [ 4.394493] [drm] DFP1: INTERNAL_UNIPHY2 [ 4.398783] [drm] Connector 1: [ 4.401854] [drm] DVI-I-1 [ 4.404666] [drm] HPD2 [ 4.407221] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 4.414647] [drm] Encoders: [ 4.417635] [drm] DFP2: INTERNAL_UNIPHY [ 4.421836] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.540136] [drm] fb mappable at 0x806E9000 [ 4.544354] [drm] vram apper at 0x80000000 [ 4.548468] [drm] size 8294400 [ 4.551541] [drm] fb depth is 24 [ 4.554786] [drm] pitch is 7680 [ 4.850224] Console: switching to colour frame buffer device 240x67 [ 4.929533] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device [ 4.939239] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0 [ 4.947588] [drm] amdgpu kernel modesetting enabled. [ 4.967357] brd: module loaded [ 4.977422] loop: module loaded [ 4.981255] sm501 0001:00:06.0: enabling device (0004 -> 0006) [ 4.987695] sm501 0001:00:06.0: incorrect device id c0000105 [ 4.994354] sata-dwc 4bffd1000.sata: id 0, controller version 1.82 [ 5.001510] sata-dwc 4bffd1000.sata: DesignWare DMA Controller, 1 channels [ 5.009740] scsi host0: sata-dwc [ 5.013516] ata1: SATA max UDMA/133 irq 36 [ 5.018829] libphy: Fixed MDIO Bus: probed [ 5.023585] PPC 4xx OCP EMAC driver, version 3.54 [ 5.029015] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels [ 5.035369] ZMII /plb/opb/emac-zmii@ef600d00 initialized [ 5.041307] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support [ 5.049042] TAH /plb/opb/emac-tah@ef601350 initialized [ 5.054638] TAH /plb/opb/emac-tah@ef601450 initialized [ 5.060481] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode [ 5.068225] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5 [ 5.075645] eth0: found Generic MII PHY (0x00) [ 5.080589] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode [ 5.088248] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00 [ 5.095666] eth1: found Generic MII PHY (0x01) [ 5.100514] PPP generic driver version 2.4.2 [ 5.105449] PPP BSD Compression module registered [ 5.110580] PPP Deflate Compression module registered [ 5.115965] NET: Registered protocol family 24 [ 5.121025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.128292] ppc-of-ehci 4bffd0400.ehci: OF EHCI [ 5.133410] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1 [ 5.142777] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400 [ 5.155181] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00 [ 5.161907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.169109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.176757] usb usb1: Product: OF EHCI [ 5.180742] usb usb1: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ehci_hcd [ 5.203447] usb usb1: SerialNumber: PPC-OF USB [ 5.222965] hub 1-0:1.0: USB hub found [ 5.241218] hub 1-0:1.0: 1 port detected [ 5.259745] ehci-pci: EHCI PCI platform driver [ 5.278695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.299590] ppc-of-ohci 4bffd0000.usb: OF OHCI [ 5.318905] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2 [ 5.341508] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.363024] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000 [ 5.384045] ata1.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133 [ 5.384052] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32) [ 5.428344] ata1.00: configured for UDMA/133 [ 5.448212] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5 [ 5.477976] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.501310] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.523111] sd 0:0:0:0: [sda] Write Protect is off [ 5.547368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.596183] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci [ 5.626927] sda: sda1 [ 5.627999] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.838612] usb 1-1: New USB device found, idVendor=0424, idProduct=2517 [ 5.882178] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.933330] hub 1-1:1.0: USB hub found [ 5.975180] hub 1-1:1.0: 7 ports detected [ 6.225870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.249419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.273268] usb usb2: Product: OF OHCI [ 6.293418] usb usb2: Manufacturer: Linux 4.6.0-rc4-next-20160421-sam460ex-jm ohci_hcd [ 6.318084] usb usb2: SerialNumber: PPC-OF USB [ 6.339924] hub 2-0:1.0: USB hub found [ 6.360481] hub 2-0:1.0: 1 port detected [ 6.381592] ohci-pci: OHCI PCI platform driver [ 6.402587] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci [ 6.427392] usbcore: registered new interface driver usblp [ 6.450043] usbcore: registered new interface driver usb-storage [ 6.473043] usbcore: registered new interface driver usbserial [ 6.495723] usbcore: registered new interface driver usbserial_generic [ 6.518937] usbserial: USB Serial support registered for generic [ 6.542275] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 6.565758] mousedev: PS/2 mouse device common for all mice [ 6.565764] i2c /dev entries driver [ 6.567794] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode [ 6.568137] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode [ 6.568293] md: linear personality registered for level -1 [ 6.568297] md: raid0 personality registered for level 0 [ 6.568300] md: raid1 personality registered for level 1 [ 6.568304] md: raid10 personality registered for level 10 [ 6.569330] md: raid6 personality registered for level 6 [ 6.569334] md: raid5 personality registered for level 5 [ 6.569337] md: raid4 personality registered for level 4 [ 6.569986] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 6.569990] EDAC PPC4xx MC: v1.0.0 [ 6.569993] EDAC PPC4xx MC: Reporting type: interrupt [ 6.570655] hidraw: raw HID events driver (C) Jiri Kosina [ 6.572018] usbcore: registered new interface driver usbhid [ 6.572020] usbhid: USB HID core driver [ 6.577720] no UART detected at 0x1 [ 6.578465] usbcore: registered new interface driver snd-usb-audio [ 6.578575] usbcore: registered new interface driver snd-ua101 [ 6.578688] usbcore: registered new interface driver snd-usb-usx2y [ 6.578860] ipip: IPv4 over IPv4 tunneling driver [ 6.580413] Initializing XFRM netlink socket [ 6.581574] NET: Registered protocol family 10 [ 6.583379] sit: IPv6 over IPv4 tunneling driver [ 6.583983] NET: Registered protocol family 17 [ 6.584005] NET: Registered protocol family 15 [ 6.608677] Key type encrypted registered [ 6.609065] hctosys: unable to open rtc device (rtc0) [ 6.609308] ALSA device list: [ 6.609313] #0: Virtual MIDI Card 1 [ 7.221603] Waiting 10 sec before mounting root device... [ 7.241416] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.241422] usb 1-1.1: Product: USB 2.0 Hub [ 7.242101] hub 1-1.1:1.0: USB hub found [ 7.242288] hub 1-1.1:1.0: 4 ports detected [ 7.392187] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci [ 7.507149] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116 [ 7.528211] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.549647] usb 1-1.2: Product: USB Keyboard [ 7.567750] usb 1-1.2: Manufacturer: CHICONY [ 7.592794] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0 [ 7.671196] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci [ 7.693808] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0 [ 7.807400] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c [ 7.829724] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.852641] usb 1-1.1.1: Product: C-Media USB Audio Device [ 7.897543] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1 [ 7.927721] usb 1-1.5: new high-speed USB device number 6 using ppc-of-ehci [ 8.002662] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3 [ 8.044261] usb 1-1.5: New USB device found, idVendor=0781, idProduct=5530 [ 8.067927] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.092067] usb 1-1.5: Product: Cruzer [ 8.112629] usb 1-1.5: Manufacturer: SanDisk [ 8.133688] usb 1-1.5: SerialNumber: 200517373207B181D66A [ 8.156601] usb-storage 1-1.5:1.0: USB Mass Storage device detected [ 8.179893] scsi host1: usb-storage 1-1.5:1.0 [ 8.274190] usb 1-1.6: new full-speed USB device number 7 using ppc-of-ehci [ 8.386988] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b [ 8.411267] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.435933] usb 1-1.6: Product: USB Receiver [ 8.457385] usb 1-1.6: Manufacturer: Logitech [ 8.482586] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2 [ 8.565341] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0 [ 8.602293] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3 [ 8.684721] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1 [ 8.721791] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2 [ 8.826187] usb 1-1.7: new high-speed USB device number 8 using ppc-of-ehci [ 8.944715] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240 [ 8.971305] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.998342] usb 1-1.7: Product: Ultra Fast Media [ 9.022891] usb 1-1.7: Manufacturer: Generic [ 9.047130] usb 1-1.7: SerialNumber: 000000225001 [ 9.072357] usb-storage 1-1.7:1.0: USB Mass Storage device detected [ 9.098648] scsi host2: usb-storage 1-1.7:1.0 [ 9.204422] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5 [ 9.233951] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9.260307] sd 1:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 9.289710] sd 1:0:0:0: [sdb] Write Protect is off [ 9.315711] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.355380] sdb: sdb1 sdb2 sdb3 [ 9.383460] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 10.124368] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0 [ 10.154723] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 10.182700] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 17.320229] md: Waiting for all devices to be available before autodetect [ 17.348105] md: If you don't use raid, use raid=noautodetect [ 17.375599] md: Autodetecting RAID arrays. [ 17.401015] md: Scanned 0 and added 0 devices. [ 17.426682] md: autorun ... [ 17.450558] md: ... autorun DONE. [ 17.476340] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities [ 17.506702] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities [ 17.538521] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem [ 17.566553] EXT4-fs (sdb2): write access will be enabled during recovery [ 17.605249] EXT4-fs (sdb2): recovery complete [ 17.632470] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 17.661659] VFS: Mounted root (ext4 filesystem) readonly on device 8:18. [ 17.693567] devtmpfs: mounted [ 17.718490] Freeing unused kernel memory: 240K (c0afe000 - c0b3a000) [ 17.746442] This architecture does not have kernel memory protection. [ 18.080931] random: nonblocking pool is initialized [ 18.334276] systemd[1]: System time before build time, advancing clock. [ 18.448818] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 18.489620] systemd[1]: Detected architecture ppc. [ 18.582866] systemd[1]: Set hostname to . [ 19.501812] systemd[1]: Listening on udev Kernel Socket. [ 19.548344] systemd[1]: Reached target User and Group Name Lookups. [ 19.594553] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 19.641852] systemd[1]: Reached target Swap. [ 19.686689] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 19.735524] systemd[1]: Listening on Syslog Socket. [ 19.781577] systemd[1]: Listening on udev Control Socket. [ 19.828332] systemd[1]: Listening on Journal Socket. [ 19.873676] systemd[1]: Created slice User and Session Slice. [ 19.937363] systemd[1]: Reached target Encrypted Volumes. [ 19.981301] systemd[1]: Listening on Journal Socket (/dev/log). [ 20.025368] systemd[1]: Created slice System Slice. [ 20.068157] systemd[1]: Reached target Slices. [ 20.112770] systemd[1]: Starting Braille Device Support... [ 20.177269] systemd[1]: Starting Uncomplicated firewall... [ 20.231055] systemd[1]: Started Read required files in advance. [ 20.292386] systemd[1]: Mounting POSIX Message Queue File System... [ 20.354044] systemd[1]: Starting Nameserver information manager... [ 20.413924] systemd[1]: Mounting Debug File System... [ 20.478260] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 20.565501] systemd[1]: Starting Load Kernel Modules... [ 20.638155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 20.690550] systemd[1]: Reached target Remote File Systems (Pre). [ 20.737361] systemd[1]: Reached target Remote File Systems. [ 20.784018] systemd[1]: Created slice system-getty.slice. [ 20.832715] systemd[1]: Starting Create Static Device Nodes in /dev... [ 20.898690] systemd[1]: Starting Journal Service... [ 20.956698] systemd[1]: Listening on fsck to fsckd communication Socket. [ 21.025068] systemd[1]: Mounted Debug File System. [ 21.077076] systemd[1]: Mounted POSIX Message Queue File System. [ 21.140850] systemd[1]: brltty.service: Main process exited, code=exited, status=228/SECCOMP [ 21.198910] systemd[1]: Failed to start Braille Device Support. [ 21.336340] systemd[1]: brltty.service: Unit entered failed state. [ 21.389320] systemd[1]: brltty.service: Failed with result 'exit-code'. [ 21.447145] systemd[1]: Started Uncomplicated firewall. [ 21.501906] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 21.540607] systemd[1]: ureadahead.service: Unit entered failed state. [ 21.566963] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 21.606548] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 21.648031] systemd[1]: Failed to start Load Kernel Modules. [ 21.714237] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 21.741561] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 21.770592] systemd[1]: Started Create Static Device Nodes in /dev. [ 21.820444] systemd[1]: Started Nameserver information manager. [ 21.897271] systemd[1]: Started Journal Service. Ubuntu 16.04 LTS Amigaone ttyS0 Amigaone login: amigaone Password: Last login: Thu Apr 21 15:09:20 AST 2016 on tty1 Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.6.0-rc4-next-20160421-sam460ex-jm ppc) * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. amigaone@Amigaone:~$ [ 364.552919] dma dma0chan0: desc: s0xbffd1400 d0x1d9de000 l0x0 c0x400:a0dc25 [ 395.054815] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 395.063023] ata1.00: failed command: READ FPDMA QUEUED [ 395.068856] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in [ 395.068856] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 395.084030] ata1.00: status: { DRDY } [ 396.168785] usb 1-1-port5: cannot reset (err = -110) [ 397.198774] usb 1-1-port5: cannot reset (err = -110) [ 398.228770] usb 1-1-port5: cannot reset (err = -110) [ 399.258768] usb 1-1-port5: cannot reset (err = -110) [ 400.288763] usb 1-1-port5: cannot reset (err = -110) [ 400.293764] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad? [ 401.325746] usb 1-1-port5: cannot disable (err = -110) [ 402.355745] usb 1-1-port7: cannot reset (err = -110) [ 403.385741] usb 1-1-port7: cannot reset (err = -110) [ 404.415763] usb 1-1-port7: cannot reset (err = -110) [ 405.445725] usb 1-1-port7: cannot reset (err = -110) [ 406.475727] usb 1-1-port7: cannot reset (err = -110) [ 406.480727] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad? [ 407.512692] usb 1-1-port7: cannot disable (err = -110) [ 408.542704] usb 1-1-port5: cannot reset (err = -110) [ 409.572685] usb 1-1-port5: cannot reset (err = -110) [ 410.602696] usb 1-1-port5: cannot reset (err = -110) [ 411.632672] usb 1-1-port5: cannot reset (err = -110) [ 412.662673] usb 1-1-port5: cannot reset (err = -110) [ 412.667672] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad? [ 413.699653] usb 1-1-port5: cannot disable (err = -110) [ 414.729675] usb 1-1-port7: cannot reset (err = -110) [ 415.759648] usb 1-1-port7: cannot reset (err = -110) [ 416.789653] usb 1-1-port7: cannot reset (err = -110) [ 417.819629] usb 1-1-port7: cannot reset (err = -110) [ 418.849641] usb 1-1-port7: cannot reset (err = -110) [ 418.854642] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad? [ 419.886615] usb 1-1-port7: cannot disable (err = -110) [ 420.916619] usb 1-1-port5: cannot reset (err = -110) [ 421.946599] usb 1-1-port5: cannot reset (err = -110) [ 422.976605] usb 1-1-port5: cannot reset (err = -110) [ 424.006585] usb 1-1-port5: cannot reset (err = -110) [ 425.036584] usb 1-1-port5: cannot reset (err = -110) [ 425.041575] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad? [ 426.073561] usb 1-1-port5: cannot disable (err = -110) [ 426.094563] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 426.102377] ata1.00: failed command: READ FPDMA QUEUED [ 426.108216] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in [ 426.108216] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 426.123408] ata1.00: status: { DRDY } [ 427.103557] usb 1-1-port7: cannot reset (err = -110) [ 428.133542] usb 1-1-port7: cannot reset (err = -110) [ 429.163535] usb 1-1-port7: cannot reset (err = -110) [ 430.193533] usb 1-1-port7: cannot reset (err = -110) [ 431.223523] usb 1-1-port7: cannot reset (err = -110) [ 431.228522] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad? [ 432.260513] usb 1-1-port7: cannot disable (err = -110) [ 433.290508] usb 1-1-port5: cannot reset (err = -110) [ 434.320501] usb 1-1-port5: cannot reset (err = -110) [ 435.350492] usb 1-1-port5: cannot reset (err = -110) [ 436.380494] usb 1-1-port5: cannot reset (err = -110) [ 437.410477] usb 1-1-port5: cannot reset (err = -110) [ 437.415474] usb 1-1-port5: Cannot enable. Maybe the USB cable is bad? [ 438.447475] usb 1-1-port5: cannot disable (err = -110) [ 439.477462] usb 1-1-port7: cannot reset (err = -110) [ 439.482465] usb 1-1-port5: cannot disable (err = -110) [ 439.514468] blk_update_request: I/O error, dev sdb, sector 1819224 [ 439.522430] Aborting journal on device sdb2-8. [ 439.585470] blk_update_request: I/O error, dev sdb, sector 8213352 [ 439.653469] blk_update_request: I/O error, dev sdb, sector 9801112 [ 439.661444] EXT4-fs (sdb2): Delayed block allocation failed for inode 45043 at logical offset 0 with max blocks 8 with error 5 [ 439.673503] EXT4-fs (sdb2): This should not happen!! Data will be lost [ 439.673503] [ 439.681868] EXT4-fs error (device sdb2) in ext4_writepages:2738: IO failure [ 439.865563] blk_update_request: I/O error, dev sdb, sector 206848 [ 439.871698] Buffer I/O error on dev sdb2, logical block 0, lost sync page write [ 439.879238] EXT4-fs error (device sdb2): ext4_journal_check_start:56: Detected aborted journal[ 439.920602] EXT4-fs (sdb2): Remounting filesystem read-only [ 439.950464] blk_update_request: I/O error, dev sdb, sector 9801408 [ 439.950483] Buffer I/O error on device sdb2, logical block 1199320 [ 439.979078] JBD2: Error -5 detected when updating journal superblock for sdb2-8. [ 439.979160] JBD2: Error -5 detected when updating journal superblock for sdb2-8. [ 439.979273] JBD2: Error -5 detected when updating journal superblock for sdb2-8. [ 440.507458] usb 1-1-port7: cannot reset (err = -110) [ 441.537482] usb 1-1-port7: cannot reset (err = -110) [ 441.957443] EXT4-fs error (device sdb2): ext4_find_entry:1456: inode #142293: comm caja: reading directory lblock 0 [ 442.268607] EXT4-fs (sdb2): previous I/O error to superblock detected [ 442.567457] usb 1-1-port7: cannot reset (err = -110) [ 443.408525] systemd-gpt-auto-generator[5429]: /dev/sdb: failed to allocate prober: No medium found [ 443.597456] usb 1-1-port7: cannot reset (err = -110) [ 443.615403] usb 1-1-port7: Cannot enable. Maybe the USB cable is bad? [ 444.627444] hub 1-1:1.0: hub_ext_port_status failed (err = -110) [ 444.688425] usb 1-1-port7: cannot disable (err = -110) [ 445.125416] EXT4-fs error (device sdb2): ext4_find_entry:1456: inode #142419: comm tilda: reading directory lblock 0 [ 445.211409] EXT4-fs (sdb2): previous I/O error to superblock detected [ 445.731674] usb 1-1-port7: cannot disable (err = -110) [ 445.744587] sd 2:0:0:0: timing out command, waited 60s [ 450.869372] hub 1-1:1.0: hub_ext_port_status failed (err = -110) [ 456.005328] hub 1-1:1.0: hub_ext_port_status failed (err = -110) [ 457.070320] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 457.078131] ata1.00: failed command: READ FPDMA QUEUED [ 457.083693] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in [ 457.083693] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 457.098818] ata1.00: status: { DRDY } [ 488.046060] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 488.055065] ata1.00: failed command: READ FPDMA QUEUED [ 488.060817] ata1.00: cmd 60/08:00:80:5f:38/00:00:3a:00:00/40 tag 0 ncq 4096 in [ 488.060817] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 488.075893] ata1.00: status: { DRDY } [ 497.606246] sata-dwc 4bffd1000.sata: sata_dwc_error_intr SCR_ERROR=0x00020000 intpr=0x00000088 status=0x000000d0 dma_intp=187 pending=2 issued=1 [ 497.620823] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2