Message-ID: <571E23A1.2040100@tronnes.org>
Date:	Mon, 25 Apr 2016 16:03:13 +0200
From:	Noralf Trønnes <noralf@...nnes.org>
To:	Ville Syrjälä <ville.syrjala@...ux.intel.com>
Cc:	dri-devel@...ts.freedesktop.org, linux-fbdev@...r.kernel.org,
	tomi.valkeinen@...com, laurent.pinchart@...asonboard.com,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/8] drm/rect: Add some drm_clip_rect utility functions


Den 25.04.2016 15:02, skrev Ville Syrjälä:
> On Mon, Apr 25, 2016 at 02:55:52PM +0200, Noralf Trønnes wrote:
>> Den 25.04.2016 14:39, skrev Ville Syrjälä:
>>> On Sun, Apr 24, 2016 at 10:48:55PM +0200, Noralf Trønnes wrote:
>>>> Add some utility functions for struct drm_clip_rect.
>>> Looks like mostly you're just duplicating the drm_rect stuff. Why can't
>>> you use what's there already?
>> That's because the framebuffer flushing uses drm_clip_rect and not drm_rect:
> Converting to drm_rect is not an option?

That's difficult or at least verbose to do because clips is an array.
I could use drm_rect on the calling side (fbdev) since it's only one clip
which the changes are merged into, and then convert it when I call dirty().
But the driver can get zero or more clips from the dirty ioctl so I don't
see a clean way to convert this array to drm_rect without more code than
this proposal has.

Here's the driver side:

static int mipi_dbi_dirtyfb(struct drm_framebuffer *fb, void *vmem,
                 unsigned flags, unsigned color,
                 struct drm_clip_rect *clips, unsigned num_clips)
{
     struct tinydrm_device *tdev = fb->dev->dev_private;
     struct lcdreg *reg = tdev->lcdreg;
     struct drm_clip_rect full_clip = {
         .x1 = 0,
         .x2 = fb->width,
         .y1 = 0,
         .y2 = fb->height,
     };
     struct drm_clip_rect clip;
     int ret;

     drm_clip_rect_reset(&clip);
     drm_clip_rect_merge(&clip, clips, num_clips, flags,
                 fb->width, fb->height);
     if (!drm_clip_rect_intersect(&clip, &full_clip)) {
         DRM_DEBUG_KMS("Empty clip\n");
         return -EINVAL;
     }
[...]

>> struct drm_framebuffer_funcs {
>> [...]
>>           int (*dirty)(struct drm_framebuffer *framebuffer,
>>                        struct drm_file *file_priv, unsigned flags,
>>                        unsigned color, struct drm_clip_rect *clips,
>>                        unsigned num_clips);
>> };
>>
>>>> Signed-off-by: Noralf Trønnes <noralf@...nnes.org>
>>>> ---
>>>>    drivers/gpu/drm/drm_rect.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
>>>>    include/drm/drm_rect.h     | 69 ++++++++++++++++++++++++++++++++++++++++++++++
>>>>    2 files changed, 136 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
>>>> index a8e2c86..a9fb1a8 100644
>>>> --- a/drivers/gpu/drm/drm_rect.c
>>>> +++ b/drivers/gpu/drm/drm_rect.c
>>>> @@ -434,3 +434,70 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>>    	}
>>>>    }
>>>>    EXPORT_SYMBOL(drm_rect_rotate_inv);
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_intersect - intersect two clip rectangles
>>>> + * @r1: first clip rectangle
>>>> + * @r2: second clip rectangle
>>>> + *
>>>> + * Calculate the intersection of clip rectangles @r1 and @r2.
>>>> + * @r1 will be overwritten with the intersection.
>>>> + *
>>>> + * RETURNS:
>>>> + * %true if rectangle @r1 is still visible after the operation,
>>>> + * %false otherwise.
>>>> + */
>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>> +			     const struct drm_clip_rect *r2)
>>>> +{
>>>> +	r1->x1 = max(r1->x1, r2->x1);
>>>> +	r1->y1 = max(r1->y1, r2->y1);
>>>> +	r1->x2 = min(r1->x2, r2->x2);
>>>> +	r1->y2 = min(r1->y2, r2->y2);
>>>> +
>>>> +	return drm_clip_rect_visible(r1);
>>>> +}
>>>> +EXPORT_SYMBOL(drm_clip_rect_intersect);
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_merge - Merge clip rectangles
>>>> + * @dst: destination clip rectangle
>>>> + * @src: source clip rectangle(s), can be NULL
>>>> + * @num_clips: number of source clip rectangles
>>>> + * @flags: drm_mode_fb_dirty_cmd flags (DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>> + * @width: width of clip rectangle if @src is NULL
>>>> + * @height: height of clip rectangle if @src is NULL
>>>> + *
>>>> + * The dirtyfb ioctl allows for a NULL clip rectangle to be passed in,
>>>> + * so if @src is NULL, width and height is used to set a full clip rectangle.
>>>> + * @dst takes part in the merge unless it is empty {0,0,0,0}.
>>>> + */
>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>> +			 struct drm_clip_rect *src, unsigned num_clips,
>>>> +			 unsigned flags, u32 width, u32 height)
>>>> +{
>>>> +	int i;
>>>> +
>>>> +	if (!src || !num_clips) {
>>>> +		dst->x1 = 0;
>>>> +		dst->x2 = width;
>>>> +		dst->y1 = 0;
>>>> +		dst->y2 = height;
>>>> +		return;
>>>> +	}
>>>> +
>>>> +	if (drm_clip_rect_is_empty(dst)) {
>>>> +		dst->x1 = ~0;
>>>> +		dst->y1 = ~0;
>>>> +	}
>>>> +
>>>> +	for (i = 0; i < num_clips; i++) {
>>>> +		if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>> +			i++;
>>>> +		dst->x1 = min(dst->x1, src[i].x1);
>>>> +		dst->x2 = max(dst->x2, src[i].x2);
>>>> +		dst->y1 = min(dst->y1, src[i].y1);
>>>> +		dst->y2 = max(dst->y2, src[i].y2);
>>>> +	}
>>>> +}
>>>> +EXPORT_SYMBOL(drm_clip_rect_merge);
>>>> diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
>>>> index 83bb156..936ad8d 100644
>>>> --- a/include/drm/drm_rect.h
>>>> +++ b/include/drm/drm_rect.h
>>>> @@ -24,6 +24,8 @@
>>>>    #ifndef DRM_RECT_H
>>>>    #define DRM_RECT_H
>>>>    
>>>> +#include <uapi/drm/drm.h>
>>>> +
>>>>    /**
>>>>     * DOC: rect utils
>>>>     *
>>>> @@ -171,4 +173,71 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>>    			 int width, int height,
>>>>    			 unsigned int rotation);
>>>>    
>>>> +/**
>>>> + * drm_clip_rect_width - determine the clip rectangle width
>>>> + * @r: clip rectangle whose width is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * The width of the clip rectangle.
>>>> + */
>>>> +static inline int drm_clip_rect_width(const struct drm_clip_rect *r)
>>>> +{
>>>> +	return r->x2 - r->x1;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_height - determine the clip rectangle height
>>>> + * @r: clip rectangle whose height is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * The height of the clip rectangle.
>>>> + */
>>>> +static inline int drm_clip_rect_height(const struct drm_clip_rect *r)
>>>> +{
>>>> +	return r->y2 - r->y1;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_visible - determine if the the clip rectangle is visible
>>>> + * @r: clip rectangle whose visibility is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * %true if the clip rectangle is visible, %false otherwise.
>>>> + */
>>>> +static inline bool drm_clip_rect_visible(const struct drm_clip_rect *r)
>>>> +{
>>>> +	return drm_clip_rect_width(r) > 0 && drm_clip_rect_height(r) > 0;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_reset - Reset clip rectangle
>>>> + * @clip: clip rectangle
>>>> + *
>>>> + * Sets clip rectangle to {0,0,0,0}.
>>>> + */
>>>> +static inline void drm_clip_rect_reset(struct drm_clip_rect *clip)
>>>> +{
>>>> +	clip->x1 = 0;
>>>> +	clip->x2 = 0;
>>>> +	clip->y1 = 0;
>>>> +	clip->y2 = 0;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_is_empty - Is clip rectangle empty?
>>>> + * @clip: clip rectangle
>>>> + *
>>>> + * Returns true if clip rectangle is {0,0,0,0}.
>>>> + */
>>>> +static inline bool drm_clip_rect_is_empty(struct drm_clip_rect *clip)
>>>> +{
>>>> +	return (!clip->x1 && !clip->x2 && !clip->y1 && !clip->y2);
>>>> +}
>>>> +
>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>> +			     const struct drm_clip_rect *r2);
>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>> +			 struct drm_clip_rect *src, unsigned num_clips,
>>>> +			 unsigned flags, u32 width, u32 height);
>>>> +
>>>>    #endif
>>>> -- 
>>>> 2.2.2
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel@...ts.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists