[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1461617335-22372-1-git-send-email-paulmck@linux.vnet.ibm.com>
Date: Mon, 25 Apr 2016 13:48:55 -0700
From: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
Cc: mingo@...nel.org, "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>,
Tony Lindgren <tony@...mide.com>,
Russell King <linux@....linux.org.uk>,
Steven Rostedt <rostedt@...dmis.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Testing on ARM encountered the following pair of lockdep-RCU splats:
------------------------------------------------------------------------
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc4-next-20160422 #1 Not tainted
-------------------------------
include/trace/events/power.h:328 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160422 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[<c010f55c>] (unwind_backtrace) from [<c010b64c>] (show_stack+0x10/0x14)
[<c010b64c>] (show_stack) from [<c047acbc>] (dump_stack+0xa8/0xe0)
[<c047acbc>] (dump_stack) from [<c012bc10>] (pwrdm_set_next_pwrst+0xf8/0x1cc)
[<c012bc10>] (pwrdm_set_next_pwrst) from [<c01269fc>] (omap3_enter_idle_bm+0x1b8/0x1e8)
[<c01269fc>] (omap3_enter_idle_bm) from [<c05fa0b8>] (cpuidle_enter_state+0x84/0x408)
[<c05fa0b8>] (cpuidle_enter_state) from [<c0182c1c>] (cpu_startup_entry+0x1c8/0x3f0)
[<c0182c1c>] (cpu_startup_entry) from [<c0b00c20>] (start_kernel+0x354/0x3cc)
------------------------------------------------------------------------
[<c010f55c>] (unwind_backtrace) from [<c010b64c>] (show_stack+0x10/0x14)
[<c010b64c>] (show_stack) from [<c047ac3c>] (dump_stack+0xa8/0xe0)
[<c047ac3c>] (dump_stack) from [<c012c340>] (_pwrdm_state_switch+0x188/0x32c)
[<c012c340>] (_pwrdm_state_switch) from [<c012c4f0>] (_pwrdm_post_transition_cb+0xc/0x14)
[<c012c4f0>] (_pwrdm_post_transition_cb) from [<c012ba74>] (pwrdm_for_each+0x30/0x5c)
[<c012ba74>] (pwrdm_for_each) from [<c012c72c>] (pwrdm_post_transition+0x24/0x30)
[<c012c72c>] (pwrdm_post_transition) from [<c012548c>] (omap_sram_idle+0xfc/0x240)
[<c012548c>] (omap_sram_idle) from [<c0126934>] (omap3_enter_idle_bm+0xf0/0x1e8)
[<c0126934>] (omap3_enter_idle_bm) from [<c05fa038>] (cpuidle_enter_state+0x84/0x408)
[<c05fa038>] (cpuidle_enter_state) from [<c0182b90>] (cpu_startup_entry+0x1c8/0x3f0)
[<c0182b90>] (cpu_startup_entry) from [<c0b00c20>] (start_kernel+0x354/0x3cc)
------------------------------------------------------------------------
These are caused by event tracing from the idle loop. This commit
therefore adds the _rcuidle suffix to make RCU aware of this implicit
use of RCU by event tracing, thus preventing both splats.
Reported-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
Tested-by: Guenter Roeck <linux@...ck-us.net>
Cc: Tony Lindgren <tony@...mide.com>
Cc: Russell King <linux@....linux.org.uk>
Cc: Steven Rostedt <rostedt@...dmis.org>
Cc: <linux-omap@...r.kernel.org>
Cc: <linux-arm-kernel@...ts.infradead.org>
---
arch/arm/mach-omap2/powerdomain.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 78af6d8cf2e2..daf2753de7aa 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
trace_state = (PWRDM_TRACE_STATES_FLAG |
((next & OMAP_POWERSTATE_MASK) << 8) |
((prev & OMAP_POWERSTATE_MASK) << 0));
- trace_power_domain_target(pwrdm->name, trace_state,
- smp_processor_id());
+ trace_power_domain_target_rcuidle(pwrdm->name,
+ trace_state,
+ smp_processor_id());
}
break;
default:
@@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
- trace_power_domain_target(pwrdm->name, pwrst,
- smp_processor_id());
+ trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
+ smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}
--
2.5.2
Powered by blists - more mailing lists