lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20160426081915.GB6881@dell>
Date:	Tue, 26 Apr 2016 09:19:15 +0100
From:	Lee Jones <lee.jones@...aro.org>
To:	patrice.chotard@...com
Cc:	linus.walleij@...aro.org, gnurou@...il.com,
	linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, maxime.coquelin@...com,
	amelie.delaunay@...com, shawnguo@...nel.org, kernel@...gutronix.de,
	dinguyen@...nsource.altera.com, vireshk@...nel.org,
	shiraz.linux.kernel@...il.com, swarren@...dotorg.org,
	thierry.reding@...il.com
Subject: Re: [PATCH 1/8] mfd: stmpe: Add STMPE_IDX_SYS_CTRL/2 enum

On Tue, 19 Apr 2016, patrice.chotard@...com wrote:

> From: Patrice Chotard <patrice.chotard@...com>
> 
> As STMPE1801/1601/24xx has a SYS_CTRL register and
> STMPE1601/2403 has even a SYS_CTRL2 register, add
> STMPE_IDX_SYS_CTRL/2 and update driver code accordingly
> 
> This update prepares the ground for not yet supported STMPE1600
> which share similar REG_SYS_CTRL register.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@...com>
> ---
>  drivers/mfd/stmpe.c       | 21 ++++++++++++++-------
>  drivers/mfd/stmpe.h       |  2 ++
>  include/linux/mfd/stmpe.h |  2 ++
>  3 files changed, 18 insertions(+), 7 deletions(-)

When you fix and resubmit, please add my:

  Acked-by: Lee Jones <lee.jones@...aro.org>

... for my own personal reference.

> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index fb8f9e8..c553b73 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -448,6 +448,8 @@ static const struct mfd_cell stmpe_ts_cell = {
>  
>  static const u8 stmpe811_regs[] = {
>  	[STMPE_IDX_CHIP_ID]	= STMPE811_REG_CHIP_ID,
> +	[STMPE_IDX_SYS_CTRL]	= STMPE811_REG_SYS_CTRL,
> +	[STMPE_IDX_SYS_CTRL2]	= STMPE811_REG_SYS_CTRL2,
>  	[STMPE_IDX_ICR_LSB]	= STMPE811_REG_INT_CTRL,
>  	[STMPE_IDX_IER_LSB]	= STMPE811_REG_INT_EN,
>  	[STMPE_IDX_ISR_MSB]	= STMPE811_REG_INT_STA,
> @@ -490,7 +492,7 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
>  	if (blocks & STMPE_BLOCK_TOUCHSCREEN)
>  		mask |= STMPE811_SYS_CTRL2_TSC_OFF;
>  
> -	return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
> +	return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
>  				enable ? 0 : mask);
>  }
>  
> @@ -535,6 +537,8 @@ static struct stmpe_variant_info stmpe610 = {
>  
>  static const u8 stmpe1601_regs[] = {
>  	[STMPE_IDX_CHIP_ID]	= STMPE1601_REG_CHIP_ID,
> +	[STMPE_IDX_SYS_CTRL]	= STMPE1601_REG_SYS_CTRL,
> +	[STMPE_IDX_SYS_CTRL2]	= STMPE1601_REG_SYS_CTRL2,
>  	[STMPE_IDX_ICR_LSB]	= STMPE1601_REG_ICR_LSB,
>  	[STMPE_IDX_IER_LSB]	= STMPE1601_REG_IER_LSB,
>  	[STMPE_IDX_ISR_MSB]	= STMPE1601_REG_ISR_MSB,
> @@ -619,13 +623,13 @@ static int stmpe1601_autosleep(struct stmpe *stmpe,
>  		return timeout;
>  	}
>  
> -	ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
> +	ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
>  			STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
>  			timeout);
>  	if (ret < 0)
>  		return ret;
>  
> -	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
> +	return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
>  			STPME1601_AUTOSLEEP_ENABLE,
>  			STPME1601_AUTOSLEEP_ENABLE);
>  }
> @@ -650,7 +654,7 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
>  	else
>  		mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
>  
> -	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
> +	return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
>  				enable ? mask : 0);
>  }
>  
> @@ -689,6 +693,7 @@ static struct stmpe_variant_info stmpe1601 = {
>   */
>  static const u8 stmpe1801_regs[] = {
>  	[STMPE_IDX_CHIP_ID]	= STMPE1801_REG_CHIP_ID,
> +	[STMPE_IDX_SYS_CTRL]	= STMPE1801_REG_SYS_CTRL,
>  	[STMPE_IDX_ICR_LSB]	= STMPE1801_REG_INT_CTRL_LOW,
>  	[STMPE_IDX_IER_LSB]	= STMPE1801_REG_INT_EN_MASK_LOW,
>  	[STMPE_IDX_ISR_LSB]	= STMPE1801_REG_INT_STA_LOW,
> @@ -735,14 +740,14 @@ static int stmpe1801_reset(struct stmpe *stmpe)
>  	unsigned long timeout;
>  	int ret = 0;
>  
> -	ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
> +	ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
>  		STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
>  	if (ret < 0)
>  		return ret;
>  
>  	timeout = jiffies + msecs_to_jiffies(100);
>  	while (time_before(jiffies, timeout)) {
> -		ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
> +		ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
>  		if (ret < 0)
>  			return ret;
>  		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
> @@ -773,6 +778,8 @@ static struct stmpe_variant_info stmpe1801 = {
>  
>  static const u8 stmpe24xx_regs[] = {
>  	[STMPE_IDX_CHIP_ID]	= STMPE24XX_REG_CHIP_ID,
> +	[STMPE_IDX_SYS_CTRL]	= STMPE24XX_REG_SYS_CTRL,
> +	[STMPE_IDX_SYS_CTRL2]	= STMPE24XX_REG_SYS_CTRL2,
>  	[STMPE_IDX_ICR_LSB]	= STMPE24XX_REG_ICR_LSB,
>  	[STMPE_IDX_IER_LSB]	= STMPE24XX_REG_IER_LSB,
>  	[STMPE_IDX_ISR_MSB]	= STMPE24XX_REG_ISR_MSB,
> @@ -819,7 +826,7 @@ static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
>  	if (blocks & STMPE_BLOCK_KEYPAD)
>  		mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
>  
> -	return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
> +	return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
>  				enable ? mask : 0);
>  }
>  
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index 84adb46..406f9f2 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -138,6 +138,7 @@ int stmpe_remove(struct stmpe *stmpe);
>  #define STMPE811_NR_INTERNAL_IRQS	8
>  
>  #define STMPE811_REG_CHIP_ID		0x00
> +#define STMPE811_REG_SYS_CTRL		0x03
>  #define STMPE811_REG_SYS_CTRL2		0x04
>  #define STMPE811_REG_SPI_CFG		0x08
>  #define STMPE811_REG_INT_CTRL		0x09
> @@ -264,6 +265,7 @@ int stmpe_remove(struct stmpe *stmpe);
>  #define STMPE24XX_NR_INTERNAL_IRQS	9
>  
>  #define STMPE24XX_REG_SYS_CTRL		0x02
> +#define STMPE24XX_REG_SYS_CTRL2		0x03
>  #define STMPE24XX_REG_ICR_LSB		0x11
>  #define STMPE24XX_REG_IER_LSB		0x13
>  #define STMPE24XX_REG_ISR_MSB		0x14
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index cb83883..6c6690f 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -39,6 +39,8 @@ enum stmpe_partnum {
>   */
>  enum {
>  	STMPE_IDX_CHIP_ID,
> +	STMPE_IDX_SYS_CTRL,
> +	STMPE_IDX_SYS_CTRL2,
>  	STMPE_IDX_ICR_LSB,
>  	STMPE_IDX_IER_LSB,
>  	STMPE_IDX_ISR_LSB,

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ