linux-kernel - [PATCH v2 07/23] ata: sata_dwc_460ex: skip dma setup for non-dma commands

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1461661404-1952-8-git-send-email-andriy.shevchenko@linux.intel.com>
Date:	Tue, 26 Apr 2016 12:03:08 +0300
From:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:	Tejun Heo <tj@...nel.org>, linux-ide@...r.kernel.org,
	Rob Herring <robh+dt@...nel.org>,
	linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	Christian Lamparter <chunkeey@...glemail.com>,
	Måns Rullgård <mans@...sr.com>,
	Julian Margetson <runaway@...dw.ms>
Subject: [PATCH v2 07/23] ata: sata_dwc_460ex: skip dma setup for non-dma commands

From: Mans Rullgard <mans@...sr.com>

Calling dmaengine_prep_slave_sg() for non-dma ATA commands is
unnecessary at best and could be harmful if the dma driver reacts
badly to this.  It also causes this driver to print a bogus error
message in these cases.

This patch changes sata_dwc_qc_issue() to only do the dma setup
for dma commands and also reports an error to libata if if fails.

Tested-by: Christian Lamparter <chunkeey@...glemail.com>
Signed-off-by: Mans Rullgard <mans@...sr.com>
---
 drivers/ata/sata_dwc_460ex.c | 35 +++++++++--------------------------
 1 file changed, 9 insertions(+), 26 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 1250e18..038e5fb 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1023,36 +1023,12 @@ static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
 	sata_dwc_bmdma_start_by_tag(qc, tag);
 }
 
-/*
- * Function : sata_dwc_qc_prep_by_tag
- * arguments : ata_queued_cmd *qc, u8 tag
- * Return value : None
- * qc_prep for a particular queued command based on tag
- */
-static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
-{
-	struct dma_async_tx_descriptor *desc;
-	struct ata_port *ap = qc->ap;
-	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
-
-	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
-		__func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
-		 qc->n_elem);
-
-	desc = dma_dwc_xfer_setup(qc);
-	if (!desc) {
-		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
-			__func__);
-		return;
-	}
-	hsdevp->desc[tag] = desc;
-}
-
 static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
 {
 	u32 sactive;
 	u8 tag = qc->tag;
 	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
 
 #ifdef DEBUG_NCQ
 	if (qc->tag > 0 || ap->link.sactive > 1)
@@ -1066,7 +1042,14 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
 
 	if (!ata_is_ncq(qc->tf.protocol))
 		tag = 0;
-	sata_dwc_qc_prep_by_tag(qc, tag);
+
+	if (ata_is_dma(qc->tf.protocol)) {
+		hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
+		if (!hsdevp->desc[tag])
+			return AC_ERR_SYSTEM;
+	} else {
+		hsdevp->desc[tag] = NULL;
+	}
 
 	if (ata_is_ncq(qc->tf.protocol)) {
 		sactive = core_scr_read(SCR_ACTIVE);
-- 
2.8.0.rc3