| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <571F473F.1020902@collabora.com>
Date: Tue, 26 Apr 2016 12:47:27 +0200
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: Tomeu Vizoso <tomeu.vizoso@...labora.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Sebastian Reichel <sre@...nel.org>
CC: Sameer Nanda <snanda@...omium.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Lee Jones <lee.jones@...aro.org>,
Benson Leung <bleung@...omium.org>,
Enric Balletbò <enric.balletbo@...labora.co.uk>,
Vic Yang <victoryang@...omium.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Vincent Palatin <vpalatin@...omium.org>,
Randall Spangler <rspangler@...omium.org>,
Todd Broch <tbroch@...omium.org>,
Gwendal Grignou <gwendal@...omium.org>,
Shawn Nematbakhsh <shawnn@...omium.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
David Woodhouse <dwmw2@...radead.org>
Subject: Re: [PATCH v8 6/7] power: cros_usbpd-charger: Add EC-based USB PD
charger driver
Hi Tomeu,
Thanks for the patch, looks good, a few comments below.
On 20/04/16 09:42, Tomeu Vizoso wrote:
> Hi Sebastian,
>
> is there any chance that you could review this patch?
>
> Thanks,
>
> Tomeu
>
> On 12 April 2016 at 14:32, Tomeu Vizoso <tomeu.vizoso@...labora.com> wrote:
>> From: Sameer Nanda <snanda@...omium.org>
>>
>> This driver exposes the charger functionality in the PD EC to userspace.
>>
>> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@...labora.com>
>> Cc: Sameer Nanda <snanda@...omium.org>
>> Cc: Benson Leung <bleung@...omium.org>
>> Cc: Shawn Nematbakhsh <shawnn@...omium.org>
>> ---
>>
>> Changes in v8: None
>> Changes in v7: None
>> Changes in v6: None
>> Changes in v5:
>> - Fix type of variable passed to do_div.
>>
>> Changes in v4:
>> - Declare size parameters in ec_command as size_t
>>
>> Changes in v3:
>> - Use do_div so it builds on 32bit (suggested by 0-day kbuild bot).
>> - Remove sysfs attributes ext_current_lim and ext_voltage_lim because
>> I don't know yet where they should be placed (and don't have HW to
>> test them).
>> - Remove superfluous pre-allocated buffers ec_inbuf and ec_outbuf.
>> - Lots of misc comments from Stephen Boyd were addressed.
>> - Unregister notification listener in .remove callback.
>>
>> Changes in v2:
>> - Split out changes to cros_ec_commands.h and the helpers added to
>> mfd/cros_ec.h from the patch that adds the charger driver, as
>> suggested by Lee.
>> - Actually call get_ec_num_ports.
>>
>> drivers/power/Kconfig | 10 +
>> drivers/power/Makefile | 1 +
>> drivers/power/cros_usbpd-charger.c | 780 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 791 insertions(+)
>> create mode 100644 drivers/power/cros_usbpd-charger.c
>>
>> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
>> index 421770ddafa3..d096e76ed822 100644
>> --- a/drivers/power/Kconfig
>> +++ b/drivers/power/Kconfig
>> @@ -509,6 +509,16 @@ config AXP20X_POWER
>> This driver provides support for the power supply features of
>> AXP20x PMIC.
>>
>> +config CHARGER_CROS_USB_PD
>> + tristate "Chrome OS EC based USB PD charger"
>> + depends on MFD_CROS_EC
>> + default y
Guess you should not set default to yes here.
>> + help
>> + Say Y here to enable Chrome OS EC based USB PD charger driver. This
>> + driver gets various bits of information about what is connected to
>> + USB PD ports from the EC and converts that into power_supply
>> + properties.
>> +
>> endif # POWER_SUPPLY
>>
>> source "drivers/power/reset/Kconfig"
>> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
>> index e46b75d448a5..c9eca1f9bfb0 100644
>> --- a/drivers/power/Makefile
>> +++ b/drivers/power/Makefile
>> @@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
>> obj-$(CONFIG_POWER_RESET) += reset/
>> obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
>> obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
>> +obj-$(CONFIG_CHARGER_CROS_USB_PD) += cros_usbpd-charger.o
>> diff --git a/drivers/power/cros_usbpd-charger.c b/drivers/power/cros_usbpd-charger.c
>> new file mode 100644
>> index 000000000000..e7366660c093
>> --- /dev/null
>> +++ b/drivers/power/cros_usbpd-charger.c
>> @@ -0,0 +1,780 @@
>> +/*
>> + * Power supply driver for ChromeOS EC based USB PD Charger.
>> + *
>> + * Copyright (c) 2014 Google, Inc
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/ktime.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/cros_ec.h>
>> +#include <linux/mfd/cros_ec_commands.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/power_supply.h>
>> +#include <linux/rtc.h>
>> +#include <linux/slab.h>
>> +
>> +#define CROS_USB_PD_MAX_PORTS 8
>> +#define CROS_USB_PD_MAX_LOG_ENTRIES 30
>> +
>> +#define CROS_USB_PD_LOG_UPDATE_DELAY msecs_to_jiffies(60000)
>> +#define CROS_USB_PD_CACHE_UPDATE_DELAY msecs_to_jiffies(500)
>> +
>> +/* Buffer + macro for building PDLOG string */
>> +#define BUF_SIZE 80
>> +#define APPEND_STRING(buf, len, str, ...) ((len) += \
>> + snprintf((buf) + (len), max(BUF_SIZE - (len), 0), (str), ##__VA_ARGS__))
>> +
>> +#define CHARGER_DIR_NAME "CROS_USB_PD_CHARGER%d"
>> +#define CHARGER_DIR_NAME_LENGTH sizeof(CHARGER_DIR_NAME)
>> +
>> +#define MANUFACTURER_MODEL_LENGTH 32
>> +
>> +struct port_data {
>> + int port_number;
>> + char name[CHARGER_DIR_NAME_LENGTH];
>> + char manufacturer[MANUFACTURER_MODEL_LENGTH];
>> + char model_name[MANUFACTURER_MODEL_LENGTH];
>> + struct power_supply *psy;
>> + struct power_supply_desc psy_desc;
>> + int psy_type;
>> + int psy_online;
>> + int psy_status;
>> + int psy_current_max;
>> + int psy_voltage_max_design;
>> + int psy_voltage_now;
>> + int psy_power_max;
>> + struct charger_data *charger;
>> + unsigned long last_update;
>> +};
>> +
>> +struct charger_data {
>> + struct device *dev;
>> + struct cros_ec_dev *ec_dev;
>> + struct cros_ec_device *ec_device;
>> + int num_charger_ports;
>> + int num_registered_psy;
>> + struct port_data *ports[CROS_USB_PD_MAX_PORTS];
>> + struct delayed_work log_work;
>> + struct workqueue_struct *log_workqueue;
>> + struct notifier_block notifier;
>> + bool suspended;
>> +};
>> +
>> +static enum power_supply_property cros_usb_pd_charger_props[] = {
>> + POWER_SUPPLY_PROP_ONLINE,
>> + POWER_SUPPLY_PROP_STATUS,
>> + POWER_SUPPLY_PROP_CURRENT_MAX,
>> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
>> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
>> + POWER_SUPPLY_PROP_MODEL_NAME,
>> + POWER_SUPPLY_PROP_MANUFACTURER,
>> +};
>> +
>> +static int ec_command(struct cros_ec_dev *ec_dev, int version, int command,
>> + uint8_t *outdata, size_t outsize, uint8_t *indata,
>> + size_t insize)
>> +{
>> + struct cros_ec_device *ec_device = ec_dev->ec_dev;
>> + struct cros_ec_command *msg;
>> + int ret;
>> +
>> + msg = kmalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
>> + if (!msg)
>> + return -ENOMEM;
>> +
>> + msg->version = version;
>> + msg->command = ec_dev->cmd_offset + command;
>> + msg->outsize = outsize;
>> + msg->insize = insize;
>> +
>> + memcpy(msg->data, outdata, outsize);
>> + ret = cros_ec_cmd_xfer_status(ec_device, msg);
>> + memcpy(indata, msg->data, insize);
>> +
>> + kfree(msg);
>> +
>> + return ret;
>> +}
>> +
>> +static int set_ec_usb_pd_override_ports(struct charger_data *charger,
>> + int port_num)
>> +{
>> + struct device *dev = charger->dev;
>> + struct ec_params_charge_port_override req;
>> + int ret;
>> +
>> + req.override_port = port_num;
>> +
>> + ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_CHARGE_PORT_OVERRIDE,
>> + (uint8_t *)&req, sizeof(req),
>> + NULL, 0);
>> + if (ret < 0) {
>> + dev_err(dev, "Port Override command returned 0x%x\n", ret);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int get_ec_num_ports(struct charger_data *charger, int *num_ports)
>> +{
>> + struct device *dev = charger->dev;
>> + struct ec_response_usb_pd_ports resp;
>> + int ret;
>> +
>> + *num_ports = 0;
>> + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_PORTS, NULL, 0,
>> + (uint8_t *)&resp, sizeof(resp));
>> + if (ret < 0) {
>> + dev_err(dev, "Unable to query PD ports (err:0x%x)\n", ret);
>> + return ret;
Generally you return -EINVAL instead of ret when ec_command fails, any
reason why here is different?
>> + }
>> + *num_ports = resp.num_ports;
>> + dev_dbg(dev, "Num ports = %d\n", *num_ports);
>> +
>> + return 0;
>> +}
>> +
>> +static int get_ec_usb_pd_discovery_info(struct port_data *port)
>> +{
>> + struct charger_data *charger = port->charger;
>> + struct device *dev = charger->dev;
>> + struct ec_params_usb_pd_info_request req;
>> + struct ec_params_usb_pd_discovery_entry resp;
>> + int ret;
>> +
>> + req.port = port->port_number;
>> +
>> + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_DISCOVERY,
>> + (uint8_t *)&req, sizeof(req),
>> + (uint8_t *)&resp, sizeof(resp));
>> + if (ret < 0) {
>> + dev_err(dev, "Unable to query Discovery info (err:0x%x)\n",
>> + ret);
>> + return -EINVAL;
>> + }
>> +
>> + dev_dbg(dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
>> + port->port_number, resp.vid, resp.pid, resp.ptype);
>> +
>> + snprintf(port->manufacturer, MANUFACTURER_MODEL_LENGTH, "%x", resp.vid);
This looks a vendor id code, generally I saw this propietry show the
manufacturer name.
>> + snprintf(port->model_name, MANUFACTURER_MODEL_LENGTH, "%x", resp.pid);
>> +
>> + return 0;
>> +}
>> +
>> +static int get_ec_usb_pd_power_info(struct port_data *port)
>> +{
>> + struct charger_data *charger = port->charger;
>> + struct device *dev = charger->dev;
>> + struct ec_params_usb_pd_power_info req;
>> + struct ec_response_usb_pd_power_info resp;
>> + char role_str[80];
>> + int ret, last_psy_status, last_psy_type;
>> +
>> + req.port = port->port_number;
>> + ret = ec_command(charger->ec_dev, 0, EC_CMD_USB_PD_POWER_INFO,
>> + (uint8_t *)&req, sizeof(req),
>> + (uint8_t *)&resp, sizeof(resp));
>> + if (ret < 0) {
>> + dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
>> + return -EINVAL;
>> + }
>> +
>> + last_psy_status = port->psy_status;
>> + last_psy_type = port->psy_type;
>> +
>> + switch (resp.role) {
>> + case USB_PD_PORT_POWER_DISCONNECTED:
>> + snprintf(role_str, sizeof(role_str), "%s", "DISCONNECTED");
>> + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
>> + port->psy_online = 0;
>> + break;
>> + case USB_PD_PORT_POWER_SOURCE:
>> + snprintf(role_str, sizeof(role_str), "%s", "SOURCE");
>> + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
>> + port->psy_online = 0;
>> + break;
>> + case USB_PD_PORT_POWER_SINK:
>> + snprintf(role_str, sizeof(role_str), "%s", "SINK");
>> + port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
>> + port->psy_online = 1;
>> + break;
>> + case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
>> + snprintf(role_str, sizeof(role_str), "%s", "NOT CHARGING");
>> + port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
>> + port->psy_online = 1;
>> + break;
>> + default:
>> + snprintf(role_str, sizeof(role_str), "%s", "UNKNOWN");
>> + dev_err(dev, "Unknown role %d\n", resp.role);
>> + break;
>> + }
>> +
>> + port->psy_voltage_max_design = resp.meas.voltage_max;
>> + port->psy_voltage_now = resp.meas.voltage_now;
>> + port->psy_current_max = resp.meas.current_max;
>> + port->psy_power_max = resp.max_power;
>> +
>> + switch (resp.type) {
>> + case USB_CHG_TYPE_BC12_SDP:
>> + case USB_CHG_TYPE_VBUS:
>> + port->psy_type = POWER_SUPPLY_TYPE_USB;
>> + break;
>> + case USB_CHG_TYPE_NONE:
>> + /*
>> + * For dual-role devices when we are a source, the firmware
>> + * reports the type as NONE. Report such chargers as type
>> + * USB_PD_DRP.
>> + */
>> + if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP;
>> + else
>> + port->psy_type = POWER_SUPPLY_TYPE_USB;
>> + break;
>> + case USB_CHG_TYPE_PROPRIETARY:
>> + port->psy_type = POWER_SUPPLY_TYPE_MAINS;
>> + break;
>> + case USB_CHG_TYPE_C:
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_TYPE_C;
>> + break;
>> + case USB_CHG_TYPE_BC12_DCP:
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_DCP;
>> + break;
>> + case USB_CHG_TYPE_BC12_CDP:
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_CDP;
>> + break;
>> + case USB_CHG_TYPE_PD:
>> + if (resp.dualrole)
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_PD_DRP;
>> + else
>> + port->psy_type = POWER_SUPPLY_TYPE_USB_PD;
>> + break;
>> + case USB_CHG_TYPE_UNKNOWN:
>> + /*
>> + * While the EC is trying to determine the type of charger that
>> + * has been plugged in, it will report the charger type as
>> + * unknown. Treat this case as a dedicated charger since we
>> + * don't know any better just yet. Additionally since the power
>> + * capabilities are unknown, report the max current and voltage
>> + * as zero.
>> + */
>> + port->psy_type = POWER_SUPPLY_TYPE_MAINS;
>> + port->psy_voltage_max_design = 0;
>> + port->psy_current_max = 0;
>> + break;
>> + default:
>> + dev_err(dev, "Port %d: default case!\n",
>> + port->port_number);
>> + port->psy_type = POWER_SUPPLY_TYPE_USB;
>> + }
>> +
>> + port->psy_desc.type = port->psy_type;
>> +
>> + dev_dbg(dev,
>> + "Port %d: %s type=%d=vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
>> + port->port_number, role_str, resp.type,
>> + resp.meas.voltage_max, resp.meas.voltage_now,
>> + resp.meas.current_max, resp.meas.current_lim,
>> + resp.max_power);
>> +
>> + /*
>> + * If power supply type or status changed, explicitly call
>> + * power_supply_changed. This results in udev event getting generated
>> + * and allows user mode apps to react quicker instead of waiting for
>> + * their next poll of power supply status.
>> + */
>> + if (last_psy_type != port->psy_type ||
>> + last_psy_status != port->psy_status) {
>> + dev_dbg(dev, "Port %d: Calling power_supply_changed\n",
>> + port->port_number);
>> + power_supply_changed(port->psy);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int get_ec_port_status(struct port_data *port, bool ratelimit)
>> +{
>> + int ret;
>> +
>> + if (ratelimit &&
>> + time_is_after_jiffies(port->last_update +
>> + CROS_USB_PD_CACHE_UPDATE_DELAY))
>> + return 0;
>> +
>> + ret = get_ec_usb_pd_power_info(port);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = get_ec_usb_pd_discovery_info(port);
>> + port->last_update = jiffies;
>> +
>> + return ret;
>> +}
>> +
>> +static void cros_usb_pd_charger_power_changed(struct power_supply *psy)
>> +{
>> + struct port_data *port = power_supply_get_drvdata(psy);
>> + struct charger_data *charger = port->charger;
>> + struct device *dev = charger->dev;
>> + int i;
>> +
>> + dev_dbg(dev, "cros_usb_pd_charger_power_changed\n");
nit: In my opinion this debug message is not needed and doesn't add any
information. It only shows that the function is called. You can usethe
kernel tracing tools for that.
>> + for (i = 0; i < charger->num_registered_psy; i++)
>> + get_ec_port_status(charger->ports[i], false);
>> +}
>> +
>> +static int cros_usb_pd_charger_get_prop(struct power_supply *psy,
>> + enum power_supply_property psp,
>> + union power_supply_propval *val)
>> +{
>> + struct port_data *port = power_supply_get_drvdata(psy);
>> + struct charger_data *charger = port->charger;
>> + struct device *dev = charger->dev;
>> + int ret;
>> +
>> +
>> + /* Only refresh ec_port_status for dynamic properties */
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_CURRENT_MAX:
>> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
>> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
>> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
>> + ret = get_ec_port_status(port, true);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to get port status (err:0x%x)\n",
>> + ret);
>> + return -EINVAL;
>> + }
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_ONLINE:
>> + val->intval = port->psy_online;
>> + break;
>> + case POWER_SUPPLY_PROP_STATUS:
>> + val->intval = port->psy_status;
>> + break;
>> + case POWER_SUPPLY_PROP_CURRENT_MAX:
>> + val->intval = port->psy_current_max * 1000;
>> + break;
>> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
>> + val->intval = port->psy_voltage_max_design * 1000;
>> + break;
>> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
>> + val->intval = port->psy_voltage_now * 1000;
>> + break;
>> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
>> + /* TODO: send a TBD host command to the EC. */
>> + val->intval = 0;
If I'm not mistaken the function below sets the control limit max value,
but here you always return a 0. This is confusing for me. Seems that
this is not supported yet? So maybe is better remove the code related to
this or store the value set in a variable meanwhile you're not able to
ask the value to the EC.
>> + break;
>> + case POWER_SUPPLY_PROP_MODEL_NAME:
>> + val->strval = port->model_name;
>> + break;
>> + case POWER_SUPPLY_PROP_MANUFACTURER:
>> + val->strval = port->manufacturer;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int cros_usb_pd_charger_set_prop(struct power_supply *psy,
>> + enum power_supply_property psp,
>> + const union power_supply_propval *val)
>> +{
>> + struct port_data *port = power_supply_get_drvdata(psy);
>> + struct charger_data *charger = port->charger;
>> + int port_number;
>> +
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
>> + /*
>> + * A value of -1 implies switching to battery as the power
>> + * source. Any other value implies using this port as the
>> + * power source.
>> + */
>> + port_number = val->intval;
>> + if (port_number != -1)
>> + port_number = port->port_number;
>> + return set_ec_usb_pd_override_ports(charger, port_number);
>> + default:
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static int cros_usb_pd_charger_is_writeable(struct power_supply *psy,
>> + enum power_supply_property psp)
>> +{
>> + int ret;
>> +
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
>> + ret = 1;
>> + break;
>> + default:
>> + ret = 0;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void cros_usb_pd_print_log_entry(struct ec_response_pd_log *r,
>> + ktime_t tstamp)
>> +{
>> + static const char * const fault_names[] = {
>> + "---", "OCP", "fast OCP", "OVP", "Discharge"
>> + };
>> + static const char * const role_names[] = {
>> + "Disconnected", "SRC", "SNK", "SNK (not charging)"
>> + };
>> + static const char * const chg_type_names[] = {
>> + "None", "PD", "Type-C", "Proprietary",
>> + "DCP", "CDP", "SDP", "Other", "VBUS"
>> + };
>> + int i;
>> + int role_idx, type_idx;
>> + const char *fault, *role, *chg_type;
>> + struct usb_chg_measures *meas;
>> + struct mcdp_info *minfo;
>> + struct rtc_time rt;
>> + u64 msecs;
>> + int len = 0;
>> + char buf[BUF_SIZE + 1];
>> +
>> + /* the timestamp is the number of 1024th of seconds in the past */
>> + tstamp = ktime_sub_us(tstamp,
>> + (uint64_t)r->timestamp_ms << PD_LOG_TIMESTAMP_SHIFT);
>> + rt = rtc_ktime_to_tm(tstamp);
>> +
>> + switch (r->type) {
>> + case PD_EVENT_MCU_CHARGE:
>> + if (r->data & CHARGE_FLAGS_OVERRIDE)
>> + APPEND_STRING(buf, len, "override ");
>> + if (r->data & CHARGE_FLAGS_DELAYED_OVERRIDE)
>> + APPEND_STRING(buf, len, "pending_override ");
>> + role_idx = r->data & CHARGE_FLAGS_ROLE_MASK;
>> + role = role_idx < ARRAY_SIZE(role_names) ?
>> + role_names[role_idx] : "Unknown";
>> + type_idx = (r->data & CHARGE_FLAGS_TYPE_MASK)
>> + >> CHARGE_FLAGS_TYPE_SHIFT;
>> + chg_type = type_idx < ARRAY_SIZE(chg_type_names) ?
>> + chg_type_names[type_idx] : "???";
>> +
>> + if ((role_idx == USB_PD_PORT_POWER_DISCONNECTED) ||
>> + (role_idx == USB_PD_PORT_POWER_SOURCE)) {
>> + APPEND_STRING(buf, len, "%s", role);
>> + break;
>> + }
>> +
>> + meas = (struct usb_chg_measures *)r->payload;
>> + APPEND_STRING(buf, len, "%s %s %s %dmV max %dmV / %dmA", role,
>> + r->data & CHARGE_FLAGS_DUAL_ROLE ? "DRP" : "Charger",
>> + chg_type,
>> + meas->voltage_now,
>> + meas->voltage_max,
>> + meas->current_max);
>> + break;
>> + case PD_EVENT_ACC_RW_FAIL:
>> + APPEND_STRING(buf, len, "RW signature check failed");
>> + break;
>> + case PD_EVENT_PS_FAULT:
>> + fault = r->data < ARRAY_SIZE(fault_names) ? fault_names[r->data]
>> + : "???";
>> + APPEND_STRING(buf, len, "Power supply fault: %s", fault);
>> + break;
>> + case PD_EVENT_VIDEO_DP_MODE:
>> + APPEND_STRING(buf, len, "DP mode %sabled",
>> + (r->data == 1) ? "en" : "dis");
>> + break;
>> + case PD_EVENT_VIDEO_CODEC:
>> + minfo = (struct mcdp_info *)r->payload;
>> + APPEND_STRING(buf, len,
>> + "HDMI info: family:%04x chipid:%04x irom:%d.%d.%d fw:%d.%d.%d",
>> + MCDP_FAMILY(minfo->family),
>> + MCDP_CHIPID(minfo->chipid),
>> + minfo->irom.major, minfo->irom.minor,
>> + minfo->irom.build, minfo->fw.major,
>> + minfo->fw.minor, minfo->fw.build);
>> + break;
>> + default:
>> + APPEND_STRING(buf, len,
>> + "Event %02x (%04x) [", r->type, r->data);
>> + for (i = 0; i < PD_LOG_SIZE(r->size_port); i++)
>> + APPEND_STRING(buf, len, "%02x ", r->payload[i]);
>> + APPEND_STRING(buf, len, "]");
>> + break;
>> + }
>> +
>> + msecs = ktime_to_ms(tstamp);
>> + do_div(msecs, MSEC_PER_SEC);
>> + pr_info("PDLOG %d/%02d/%02d %02d:%02d:%02d.%03llu P%d %s\n",
>> + rt.tm_year + 1900, rt.tm_mon + 1, rt.tm_mday,
>> + rt.tm_hour, rt.tm_min, rt.tm_sec, msecs,
>> + PD_LOG_PORT(r->size_port), buf);
nit: Maybe is better use a debug print level here. How often is this called?
>> +}
>> +
>> +static void cros_usb_pd_log_check(struct work_struct *work)
>> +{
>> + struct charger_data *charger = container_of(to_delayed_work(work),
>> + struct charger_data, log_work);
>> + struct device *dev = charger->dev;
>> + union {
>> + struct ec_response_pd_log r;
>> + uint32_t words[8]; /* space for the payload */
>> + } u;
>> + int ret;
>> + int entries = 0;
>> + ktime_t now;
>> +
>> + if (charger->suspended) {
>> + dev_dbg(dev, "Suspended...bailing out\n");
>> + return;
>> + }
>> +
>> + while (entries++ < CROS_USB_PD_MAX_LOG_ENTRIES) {
>> + ret = ec_command(charger->ec_dev, 0, EC_CMD_PD_GET_LOG_ENTRY,
>> + NULL, 0, (uint8_t *)&u, sizeof(u));
>> + now = ktime_get_real();
>> + if (ret < 0) {
>> + dev_dbg(dev, "Cannot get PD log %d\n", ret);
>> + break;
>> + }
>> + if (u.r.type == PD_EVENT_NO_ENTRY)
>> + break;
>> +
>> + cros_usb_pd_print_log_entry(&u.r, now);
>> + }
>> +
>> + queue_delayed_work(charger->log_workqueue, &charger->log_work,
>> + CROS_USB_PD_LOG_UPDATE_DELAY);
>> +}
>> +
>> +static int cros_usb_pd_ec_event(struct notifier_block *nb,
>> + unsigned long queued_during_suspend, void *_notify)
>> +{
>> + struct charger_data *charger;
>> + struct device *dev;
>> + struct cros_ec_device *ec_device;
>> + u32 host_event;
>> +
>> + charger = container_of(nb, struct charger_data, notifier);
>> + dev = charger->dev;
>> + ec_device = charger->ec_device;
>> +
>> + host_event = cros_ec_get_host_event(ec_device);
>> + if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
>> + cros_usb_pd_charger_power_changed(charger->ports[0]->psy);
>> + return NOTIFY_OK;
>> + }
>> +
>> + return NOTIFY_DONE;
>> +}
>> +
>> +static char *charger_supplied_to[] = {"cros-usb_pd-charger"};
>> +
>> +static int cros_usb_pd_charger_probe(struct platform_device *pd)
>> +{
>> + struct device *dev = &pd->dev;
>> + struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
>> + struct cros_ec_device *ec_device;
>> + struct charger_data *charger;
>> + struct port_data *port;
>> + struct power_supply_desc *psy_desc;
>> + struct power_supply_config psy_cfg = {};
>> + int i;
>> + int ret = -EINVAL;
>> +
>> + dev_dbg(dev, "cros_usb_pd_charger_probe\n");
nit: Remove? You can use kernel tracing tools to print functions calls.
>> + if (!ec_dev) {
>> + WARN(1, "%s: No EC dev found\n", dev_name(dev));
>> + return -EINVAL;
>> + }
>> +
>> + ec_device = ec_dev->ec_dev;
>> + if (!ec_device) {
>> + WARN(1, "%s: No EC device found\n", dev_name(dev));
>> + return -EINVAL;
>> + }
>> +
>> + charger = devm_kzalloc(dev, sizeof(struct charger_data),
>> + GFP_KERNEL);
Alignement should match with parentheses.
>> + if (!charger)
>> + return -ENOMEM;
>> +
>> + charger->dev = dev;
>> + charger->ec_dev = ec_dev;
>> + charger->ec_device = ec_device;
>> +
>> + platform_set_drvdata(pd, charger);
>> +
>> + if ((get_ec_num_ports(charger, &charger->num_charger_ports) < 0) ||
>> + !charger->num_charger_ports) {
>> + dev_err(dev, "No charging ports found\n");
>> + ret = -ENODEV;
>> + goto fail;
I think you can return -ENODEV directly here, you don't need to jump to
fail.
>> + }
>> +
>> + for (i = 0; i < charger->num_charger_ports; i++) {
>> + port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
>> + if (!port) {
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>> +
>> + port->charger = charger;
>> + port->port_number = i;
>> + sprintf(port->name, CHARGER_DIR_NAME, i);
>> +
>> + psy_desc = &port->psy_desc;
>> + psy_desc->name = port->name;
>> + psy_desc->type = POWER_SUPPLY_TYPE_USB;
>> + psy_desc->get_property = cros_usb_pd_charger_get_prop;
>> + psy_desc->set_property = cros_usb_pd_charger_set_prop;
>> + psy_desc->property_is_writeable =
>> + cros_usb_pd_charger_is_writeable;
>> + psy_desc->external_power_changed =
>> + cros_usb_pd_charger_power_changed;
>> + psy_desc->properties = cros_usb_pd_charger_props;
>> + psy_desc->num_properties = ARRAY_SIZE(
>> + cros_usb_pd_charger_props);
>> +
>> + psy_cfg.drv_data = port;
>> + psy_cfg.supplied_to = charger_supplied_to;
>> + psy_cfg.num_supplicants = ARRAY_SIZE(charger_supplied_to);
>> +
>> + port->psy = power_supply_register_no_ws(dev, psy_desc,
>> + &psy_cfg);
Guess you can use devm_power_supply_register_no_ws here.
>> + if (IS_ERR(port->psy)) {
>> + dev_err(dev, "Failed to register power supply: %ld\n",
>> + PTR_ERR(port->psy));
>> + continue;
>> + }
>> +
>> + charger->ports[charger->num_registered_psy++] = port;
>> + }
>> +
>> + if (!charger->num_registered_psy) {
>> + ret = -ENODEV;
>> + dev_err(dev, "No power supplies registered\n");
>> + goto fail;
>> + }
>> +
>> + if (ec_device->mkbp_event_supported) {
>> + /* Get PD events from the EC */
>> + charger->notifier.notifier_call = cros_usb_pd_ec_event;
>> + ret = blocking_notifier_chain_register(
>> + &ec_device->event_notifier, &charger->notifier);
>> + if (ret < 0)
>> + dev_warn(dev, "failed to register notifier\n");
>> + }
>> +
>> + /* Retrieve PD event logs periodically */
>> + INIT_DELAYED_WORK(&charger->log_work, cros_usb_pd_log_check);
>> + charger->log_workqueue =
>> + create_singlethread_workqueue("cros_usb_pd_log");
>> + queue_delayed_work(charger->log_workqueue, &charger->log_work,
>> + CROS_USB_PD_LOG_UPDATE_DELAY);
>> +
>> + return 0;
>> +
>> +fail:
>> + for (i = 0; i < charger->num_registered_psy; i++) {
>> + port = charger->ports[i];
>> + power_supply_unregister(port->psy);
If you use devm_power_supply_register_no_ws this is not needed since it
would be called by managed resources infrastructure.
>> + devm_kfree(dev, port);
Guess the managed resources infrastructure will do this for you.
>> + }
>> + platform_set_drvdata(pd, NULL);
>> +
>> + return ret;
>> +}
>> +
>> +static int cros_usb_pd_charger_remove(struct platform_device *pd)
>> +{
>> + struct charger_data *charger = platform_get_drvdata(pd);
>> + struct port_data *port;
>> + int i;
>> +
>> + if (charger->notifier.notifier_call)
>> + blocking_notifier_chain_unregister(
>> + &charger->ec_device->event_notifier,
>> + &charger->notifier);
>> +
>> + for (i = 0; i < charger->num_registered_psy; i++) {
>> + port = charger->ports[i];
>> + power_supply_unregister(port->psy);
>> + }
>> + flush_delayed_work(&charger->log_work);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int cros_usb_pd_charger_resume(struct device *dev)
>> +{
>> + struct charger_data *charger = dev_get_drvdata(dev);
>> + int i;
>> +
>> + if (!charger)
>> + return 0;
>> +
>> + charger->suspended = false;
>> +
>> + dev_dbg(dev, "cros_usb_pd_charger_resume: updating power supplies\n");
>> + for (i = 0; i < charger->num_registered_psy; i++) {
>> + power_supply_changed(charger->ports[i]->psy);
>> + charger->ports[i]->last_update =
>> + jiffies - CROS_USB_PD_CACHE_UPDATE_DELAY;
>> + }
>> + queue_delayed_work(charger->log_workqueue, &charger->log_work,
>> + CROS_USB_PD_LOG_UPDATE_DELAY);
>> +
>> + return 0;
>> +}
>> +
>> +static int cros_usb_pd_charger_suspend(struct device *dev)
>> +{
>> + struct charger_data *charger = dev_get_drvdata(dev);
>> +
>> + charger->suspended = true;
>> +
>> + flush_delayed_work(&charger->log_work);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(cros_usb_pd_charger_pm_ops,
>> + cros_usb_pd_charger_suspend, cros_usb_pd_charger_resume);
>> +
>> +static struct platform_driver cros_usb_pd_charger_driver = {
>> + .driver = {
>> + .name = "cros-usb-pd-charger",
>> + .pm = &cros_usb_pd_charger_pm_ops,
>> + },
>> + .probe = cros_usb_pd_charger_probe,
>> + .remove = cros_usb_pd_charger_remove,
>> +};
>> +
>> +module_platform_driver(cros_usb_pd_charger_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("Chrome USB PD charger");
>> +MODULE_ALIAS("power_supply:cros-usb-pd-charger");
>> --
>> 2.5.5
>>
Best regards,
Enric
Powered by blists - more mailing lists