[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160427205156.5e823476@kant>
Date: Wed, 27 Apr 2016 20:51:56 +0200
From: Stefan Richter <stefanr@...6.in-berlin.de>
To: linux-kernel@...r.kernel.org
Subject: Re: Regression of v4.6-rc vs. v4.5: hangs after a few minutes after
boot
On Apr 26 Stefan Richter wrote:
> v4.6-rc solidly hangs after a short while after boot, login to X11, and
> doing nothing much remarkable on the just brought up X desktop.
>
> Hardware: x86-64, E3-1245 v3 (Haswell),
> mainboard Supermicro X10SAE,
> using integrated Intel graphics (HD P4600, i915 driver),
> C226 PCH's AHCI and USB 2/3, ASMedia ASM1062 AHCI,
> Intel LAN (i217, igb driver),
> several IEEE 1394 controllers, some of them behind
> PCIe bridges (IDT, PLX) or PCIe-to-PCI bridges (TI, Tundra)
> and one PCI-to-CardBus bridge (Ricoh)
>
> kernel.org kernel, Gentoo Linux userland
>
> 1. known good: v4.5-rc5 (gcc 4.9.3)
> known bad: v4.6-rc2 (gcc 4.9.3), only tried one time
>
> 2. known good: v4.5.2 (gcc 5.2.0)
> known bad: v4.6-rc5 (gcc 5.2.0), only tried one time
>
> I will send my linux-4.6-rc5/.config in a follow-up message.
>
> In theory I could collect more info (simplify the hardware, run
> netconsole, bisect). In practice I cannot do so for the the time being
> due to lack of spare time. That's also the reason why I did not already
> send a report when I tested v4.6-rc2, and why I did not boot v4.6-rc[25]
> more than once yet.
Today I booted a 2nd time into v4.6-rc5, and loaded netconsole shortly
after boot and xdm login to try capturing an oops. But throughout 5 hours
uptime now, the hang was not reproduced.
--
Stefan Richter
-======----- -=-- ==-==
http://arcgraph.de/sr/
Powered by blists - more mailing lists