[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1461740729-30715-1-git-send-email-appanad@xilinx.com>
Date: Wed, 27 Apr 2016 12:35:28 +0530
From: Kedareswara rao Appana <appana.durga.rao@...inx.com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<michal.simek@...inx.com>, <soren.brinkmann@...inx.com>,
<vinod.koul@...el.com>, <dan.j.williams@...el.com>,
<appanad@...inx.com>, <moritz.fischer@...us.com>,
<laurent.pinchart@...asonboard.com>, <luis@...ethencourt.com>,
<anirudh@...inx.com>, <punnaia@...inx.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <dmaengine@...r.kernel.org>
Subject: [PATCH v7 1/2] Documentation: DT: dma: Add Xilinx zynqmp dma device tree binding documentation
Device-tree binding documentation for Xilinx zynqmp dma engine used in
Zynq UltraScale+ MPSoC.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
---
Changes in v7:
- None.
Changes in v6:
- Removed desc-axi-cache/dst-axi-cache/src-axi-cache properties
from the binding doc as it allow broken combinations when dma-coherent
is set as suggested by Rob.
- Fixed minor comments given by Rob related coding(lower case DT node name).
Changes in v5:
- Use dma-coherent flag for coherent transfers as suggested by rob.
- Removed unnecessary properties from binding doc as suggested by Rob.
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None.
.../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
new file mode 100644
index 0000000..f0f0b54
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -0,0 +1,44 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible : Should be "xlnx,zynqmp-dma-1.0"
+- reg : Memory map for gdma/adma module access.
+- interrupt-parent : Interrupt controller the interrupt is routed through
+- interrupts : Should contain DMA channel interrupt.
+- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
+- clock-names : List of input clocks "clk_main", "clk_apb"
+ (see clock bindings for details)
+
+Optional properties:
+- xlnx,include-sg : Indicates the controller to operate in simple or
+ scatter gather dma mode
+- xlnx,ratectrl : Scheduling interval in terms of clock cycles for
+ source AXI transaction
+- xlnx,overfetch : Tells whether the channel is allowed to over
+ fetch the data
+- xlnx,src-issue : Number of AXI outstanding transactions on source side
+- xlnx,src-burst-len : AXI length for data read. Support only power of
+ 2 byte values.
+- xlnx,dst-burst-len : AXI length for data write. Support only power of
+ 2 byte values.
+- dma-coherent : Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@...00000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xFD500000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 117 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ xlnx,include-sg;
+ xlnx,overfetch;
+ dma-coherent;
+ xlnx,ratectrl = <0>;
+ xlnx,src-issue = <16>;
+ xlnx,src-burst-len = <4>;
+ xlnx,dst-burst-len = <4>;
+};
--
2.1.2
Powered by blists - more mailing lists