linux-kernel - [PATCH v2 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on Odroid X/X2/U3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-id: <1461765620-6833-1-git-send-email-k.kozlowski@samsung.com>
Date:	Wed, 27 Apr 2016 16:00:18 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Kukjin Kim <kgene@...nel.org>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	Tobias Jakobi <tjakobi@...h.uni-bielefeld.de>,
	Marek Szyprowski <m.szyprowski@...sung.com>
Cc:	linux-mmc@...r.kernel.org, linux.amoon@...il.com,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [PATCH v2 1/3] ARM: dts: exynos: Define vqmmc for SD card and allow
 disabling regulators on Odroid X/X2/U3

The SD-card vmmc-supply contained incorrectly two regulators. The second
one is ignored. Fix this by defining proper vmmc and vqmmc supplies.
Additionally these regulators do not have to be always on, so allow
disabling them to reduce energy consumption.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>

---

Changes since v1:
1. None
---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index cab0f07d7d28..3d0d44581fbd 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -249,7 +249,6 @@
 				regulator-name = "VDDQ_MMC2_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -345,7 +344,6 @@
 				regulator-name = "LDO21_3.3V";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -482,7 +480,8 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo4_reg &ldo21_reg>;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
 	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
-- 
1.9.1