[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1461845589-4826-1-git-send-email-patrice.chotard@st.com>
Date: Thu, 28 Apr 2016 14:12:59 +0200
From: <patrice.chotard@...com>
To: <lee.jones@...aro.org>, <linus.walleij@...aro.org>,
<gnurou@...il.com>, <linux-gpio@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <maxime.coquelin@...com>,
<amelie.delaunay@...com>, <shawnguo@...nel.org>,
<kernel@...gutronix.de>, <dinguyen@...nsource.altera.com>,
<vireshk@...nel.org>, <shiraz.linux.kernel@...il.com>,
<thierry.reding@...il.com>, <gnurou@...il.com>,
Patrice Chotard <patrice.chotard@...com>,
<marcel.ziswiler@...adex.com>, <stefan@...er.ch>, <dev@...xeye.de>
Subject: [PATCH v2 00/10] STMPE fixes/rework and add STMPE1600 support
From: Patrice Chotard <patrice.chotard@...com>
This series cleans and fixes some bugs in MFD/GPIO STMPE drivers and prepare
the ground to add new STMPE1600 support.
STMPE1600 datasheet is available here :
http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html
Only STMPE1600 has been tested on STM32 platform. As i have no board with
others STMPE variant(STMPE610/STMPE801/STMPE811/STMPE1601/STMPE1801/STMPE2401
and STMPE2403), i put in CC boards's maintainers which are using others STMPE variant.
If they can kindly check that no regression has been introduce by this series
:
For ARM/FREESCALE IMX / MXC ARM ARCHITECTURE:
_ Shawn Guo <shawnguo@...nel.org>
_ Sascha Hauer <kernel@...gutronix.de>
For ARM/SOCFPGA ARCHITECTURE
_ Dinh Nguyen <dinguyen@...nsource.altera.com>
For SPEAR PLATFORM SUPPORT
_ Viresh Kumar <vireshk@...nel.org>
_ Shiraz Hashim <shiraz.linux.kernel@...il.com>
For Apalis/Colibri board SUPPORT
_ marcel.ziswiler@...adex.com
_ stefan@...er.ch
_ dev@...xeye.de
_ Thierry Reding <thierry.reding@...il.com>
_ Alexandre Courbot <gnurou@...il.com>
For ARM/Ux500 ARM ARCHITECTURE
_ Linus Walleij <linus.walleij@...aro.org>
v1 => v2:
_ update Cc list
_ fix kbuild test robot warnings on original patch 3
_ split patch 6 to extract usage of generic bitmask name
_ split patch 6 and 7 and introduce a new way to access registers
for both mfd/stmpe and gpio/gpio-stmpe drivers.
_ remove patch 8
Patrice Chotard (10):
mfd: stmpe: Add STMPE_IDX_SYS_CTRL/2 enum
mfd: stmpe: Add reset support for all STMPE variant
gpio: stmpe: fix edge and rising/falling edge detection
gpio: stmpe: write int status register only when needed
mfd: stmpe: use generic bit mask name
mfd: stmpe: rework registers access
gpio: stmpe: rework registers access
Documentation: dt: add stmpe1600 compatible string to stmpe mfd
mfd: Add STMPE1600 support
gpio: stmpe: Add STMPE1600 support
Documentation/devicetree/bindings/mfd/stmpe.txt | 2 +-
drivers/gpio/gpio-stmpe.c | 167 +++++++++++++++++-------
drivers/mfd/stmpe-i2c.c | 2 +
drivers/mfd/stmpe.c | 161 +++++++++++++++++++----
drivers/mfd/stmpe.h | 85 ++++++++++--
include/linux/mfd/stmpe.h | 21 +++
6 files changed, 352 insertions(+), 86 deletions(-)
--
1.9.1
Powered by blists - more mailing lists