linux-kernel - Re: [PATCH v2] cpufreq: st: enable selective initialization based on the platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160428021919.GW4225@vireshk-i7>
Date:	Thu, 28 Apr 2016 07:49:19 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	Sudeep Holla <sudeep.holla@....com>
Cc:	linux-kernel@...r.kernel.org, Lee Jones <lee.jones@...aro.org>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>, linux-pm@...r.kernel.org
Subject: Re: [PATCH v2] cpufreq: st: enable selective initialization based on
 the platform

On 27-04-16, 17:18, Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
> 
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> 	for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> 		vexpress-spc, err: -17
> 
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
> 
> This patch adds a check to do selective initialization of the driver.
> 
> Cc: Lee Jones <lee.jones@...aro.org>
> Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
> Cc: Viresh Kumar <viresh.kumar@...aro.org>
> Cc: linux-pm@...r.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@....com>
> ---
>  drivers/cpufreq/sti-cpufreq.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> v1->v2:
> 	- Updated compatible strings as per Lee's confirmation
> 
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..04042038ec4b 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
>  {
>  	int ret;
> 
> +	if ((!of_machine_is_compatible("st,stih407")) &&
> +		(!of_machine_is_compatible("st,stih410")))
> +		return -ENODEV;
> +
>  	ddata.cpu = get_cpu_device(0);
>  	if (!ddata.cpu) {
>  		dev_err(ddata.cpu, "Failed to get device for CPU0\n");

Acked-by: Viresh Kumar <viresh.kumar@...aro.org>

-- 
viresh