linux-kernel - [PATCH] PCI: hv: report resources release after stopping the bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 29 Apr 2016 11:39:10 +0200
From:	Vitaly Kuznetsov <vkuznets@...hat.com>
To:	linux-pci@...r.kernel.org
Cc:	devel@...uxdriverproject.org, linux-kernel@...r.kernel.org,
	"K. Y. Srinivasan" <kys@...rosoft.com>,
	Haiyang Zhang <haiyangz@...rosoft.com>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Jake Oshins <jakeo@...rosoft.com>
Subject: [PATCH] PCI: hv: report resources release after stopping the bus

Kernel hang is observed when pci-hyperv module is release with device
drivers still attached. E.g. when I do 'rmmod pci_hyperv' with BCM5720
device pass-through-ed (tg3 module) I see the following:

 NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [rmmod:2104]
 ...
 Call Trace:
  [<ffffffffa0641487>] tg3_read_mem+0x87/0x100 [tg3]
  [<ffffffffa063f000>] ? 0xffffffffa063f000
  [<ffffffffa0644375>] tg3_poll_fw+0x85/0x150 [tg3]
  [<ffffffffa0649877>] tg3_chip_reset+0x357/0x8c0 [tg3]
  [<ffffffffa064ca8b>] tg3_halt+0x3b/0x190 [tg3]
  [<ffffffffa0657611>] tg3_stop+0x171/0x230 [tg3]
  ...
  [<ffffffffa064c550>] tg3_remove_one+0x90/0x140 [tg3]
  [<ffffffff813bee59>] pci_device_remove+0x39/0xc0
  [<ffffffff814a3201>] __device_release_driver+0xa1/0x160
  [<ffffffff814a32e3>] device_release_driver+0x23/0x30
  [<ffffffff813b794a>] pci_stop_bus_device+0x8a/0xa0
  [<ffffffff813b7ab6>] pci_stop_root_bus+0x36/0x60
  [<ffffffffa02c3f38>] hv_pci_remove+0x238/0x260 [pci_hyperv]

The problem seems to be that we report local resources release before
stopping the bus and removing devices from it and device drivers may
try to perform some operations with these resources on shutdown. Move
resources release report after we do pci_stop_root_bus().

Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
---
 drivers/pci/host/pci-hyperv.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index f2559b6..c17e792 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -2268,11 +2268,6 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 	hbus = hv_get_drvdata(hdev);
 
-	ret = hv_send_resources_released(hdev);
-	if (ret)
-		dev_err(&hdev->device,
-			"Couldn't send resources released packet(s)\n");
-
 	memset(&pkt.teardown_packet, 0, sizeof(pkt.teardown_packet));
 	init_completion(&comp_pkt.host_event);
 	pkt.teardown_packet.completion_func = hv_pci_generic_compl;
@@ -2295,6 +2290,11 @@ static int hv_pci_remove(struct hv_device *hdev)
 		pci_unlock_rescan_remove();
 	}
 
+	ret = hv_send_resources_released(hdev);
+	if (ret)
+		dev_err(&hdev->device,
+			"Couldn't send resources released packet(s)\n");
+
 	vmbus_close(hdev->channel);
 
 	/* Delete any children which might still exist. */
-- 
2.5.5