[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <E1aw5w9-0001S0-Pm@debutante>
Date: Fri, 29 Apr 2016 11:46:17 +0100
From: Mark Brown <broonie@...nel.org>
To: Hans de Goede <hdegoede@...hat.com>
Cc: Mark Brown <broonie@...nel.org>, Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Applied "regulator: axp20x: Fix axp22x ldo_io registration error on cold boot" to the regulator tree
The patch
regulator: axp20x: Fix axp22x ldo_io registration error on cold boot
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From f40d4896bf3284573f1e70e8840c1bcfe1c6bf2d Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@...hat.com>
Date: Wed, 27 Apr 2016 20:38:44 +0200
Subject: [PATCH] regulator: axp20x: Fix axp22x ldo_io registration error on
cold boot
The maximum supported voltage for ldo_io# is 3.3V, but on cold
boot the selector comes up at 0x1f, which maps to 3.8V.
This causes _regulator_get_voltage() to fail with -EINVAL which
causes regulator registration to fail when constrains are used:
[ 1.467788] vcc-touchscreen: failed to get the current voltage(-22)
[ 1.474209] axp20x-regulator axp20x-regulator: Failed to register ldo_io1
[ 1.483363] axp20x-regulator: probe of axp20x-regulator failed with error -22
This commits makes the axp20x regulator driver accept the 0x1f register
value, fixing this.
The datasheet does not guarantee reliable operation above 3.3V, so on
boards where this regulator is used the regulator-max-microvolt setting
must be 3.3V or less.
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/axp20x-regulator.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 89f684295657..514a5e8fdbab 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -217,10 +217,14 @@ static const struct regulator_desc axp22x_regulators[] = {
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
- AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ /* Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints */
+ AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
- AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ /* Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints */
+ AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
--
2.8.0.rc3
Powered by blists - more mailing lists