| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL7P5j+E1WzC9AsS=ge4oHVTwq7Tov=kGbfJSKGyRzjg6Arg5Q@mail.gmail.com>
Date: Fri, 29 Apr 2016 15:43:28 +0200
From: Ksenija Stanojević <ksenija.stanojevic@...il.com>
To: Marek Vasut <marex@...x.de>
Cc: linux-kernel@...r.kernel.org, lee.jones@...aro.org,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-input@...r.kernel.org, Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
linux-iio@...r.kernel.org, Harald Geyer <harald@...ib.org>
Subject: Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
On Fri, Apr 29, 2016 at 3:15 PM, Marek Vasut <marex@...x.de> wrote:
> On 04/29/2016 01:47 PM, Ksenija Stanojevic wrote:
>> Add core files for mxs-lradc MFD driver.
>>
>> Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@...il.com>
>> ---
>> drivers/mfd/Kconfig | 33 +++++--
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/mxs-lradc.c | 213 ++++++++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/mxs-lradc.h | 210 +++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 449 insertions(+), 8 deletions(-)
>> create mode 100644 drivers/mfd/mxs-lradc.c
>> create mode 100644 include/linux/mfd/mxs-lradc.h
>
> Is there any chance you can also remove the same code from lradc ?
You mean drivers/iio/adc/mxs-lradc.c. I thought to remove it once this
patch set was accepted,
but I can include that in patch set.
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index eea61e3..fff44d6 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -16,7 +16,7 @@ config MFD_CS5535
>> depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
>> ---help---
>> This is the core driver for CS5535/CS5536 MFD functions. This is
>> - necessary for using the board's GPIO and MFGPT functionality.
>> + necessary for using the board's GPIO and MFGPT functionality.
>
> Probably shouldn't be part of the patch ?
Yeah, sorry about that.
>> config MFD_ACT8945A
>> tristate "Active-semi ACT8945A"
>> @@ -319,6 +319,23 @@ config MFD_HI6421_PMIC
>> menus in order to enable them.
>> We communicate with the Hi6421 via memory-mapped I/O.
>>
>> +config MFD_MXS_LRADC
>> + tristate "Freescale i.MX23/i.MX28 LRADC"
>> + depends on ARCH_MXS || COMPILE_TEST
>> + select MFD_CORE
>> + select STMP_DEVICE
>> + help
>> + Say yes here to build support for the low-resolution
>> + analog-to-digital converter (LRADC) found on the i.MX23 and i.MX28
>> + processors. This driver provides common support for accessing the
>> + device, additional drivers must be enabled in order to use the
>> + functionality of the device:
>> + mxs-lradc-adc for ADC readings
>> + mxs-lradc-ts for touchscreen support
>> +
>> + This driver can also be built as a module. If so, the module will be
>> + called mxs-lradc.
>> +
>> config HTC_EGPIO
>> bool "HTC EGPIO support"
>> depends on GPIOLIB && ARM
>> @@ -650,7 +667,7 @@ config EZX_PCAP
>> needed for MMC, TouchScreen, Sound, USB, etc..
>>
>> config MFD_VIPERBOARD
>> - tristate "Nano River Technologies Viperboard"
>> + tristate "Nano River Technologies Viperboard"
>
> Shouldn't be part of this patch
No, I should have check it twice.
>> select MFD_CORE
>> depends on USB
>> default n
>> @@ -898,11 +915,11 @@ config MFD_SMSC
>> select MFD_CORE
>> select REGMAP_I2C
>> help
>> - If you say yes here you get support for the
>> - ece1099 chips from SMSC.
>> + If you say yes here you get support for the
>> + ece1099 chips from SMSC.
>
> DTTO
>
>> - To compile this driver as a module, choose M here: the
>> - module will be called smsc.
>> + To compile this driver as a module, choose M here: the
>> + module will be called smsc.
>>
>> config ABX500_CORE
>> bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
>> @@ -956,8 +973,8 @@ config AB8500_DEBUG
>> depends on AB8500_GPADC && DEBUG_FS
>> default y if DEBUG_FS
>> help
>> - Select this option if you want debug information using the debug
>> - filesystem, debugfs.
>> + Select this option if you want debug information using the debug
>> + filesystem, debugfs.
>
> Same here
>
>> config AB8500_GPADC
>> bool "ST-Ericsson AB8500 GPADC driver"
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 5eaa6465d..236b831 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -203,3 +203,4 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
>> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
>> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
>> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
>> +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
>> diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c
>> new file mode 100644
>> index 0000000..e1c8f9e
>> --- /dev/null
>> +++ b/drivers/mfd/mxs-lradc.c
>> @@ -0,0 +1,213 @@
>> +/*
>> + * Freescale MXS LRADC driver
>> + *
>> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
>> + * Marek Vasut <marex@...x.de>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/mxs-lradc.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +
>> +static struct mfd_cell lradc_adc_dev = {
>> + .name = DRIVER_NAME_ADC,
>> +};
>> +
>> +static struct mfd_cell lradc_ts_dev = {
>> + .name = DRIVER_NAME_TS,
>> +};
>> +
>> +static const char * const mx23_lradc_irq_names[] = {
>> + "mxs-lradc-touchscreen",
>> + "mxs-lradc-channel0",
>> + "mxs-lradc-channel1",
>> + "mxs-lradc-channel2",
>> + "mxs-lradc-channel3",
>> + "mxs-lradc-channel4",
>> + "mxs-lradc-channel5",
>> + "mxs-lradc-channel6",
>> + "mxs-lradc-channel7",
>> +};
>> +
>> +static const char * const mx28_lradc_irq_names[] = {
>> + "mxs-lradc-touchscreen",
>> + "mxs-lradc-thresh0",
>> + "mxs-lradc-thresh1",
>> + "mxs-lradc-channel0",
>> + "mxs-lradc-channel1",
>> + "mxs-lradc-channel2",
>> + "mxs-lradc-channel3",
>> + "mxs-lradc-channel4",
>> + "mxs-lradc-channel5",
>> + "mxs-lradc-channel6",
>> + "mxs-lradc-channel7",
>> + "mxs-lradc-button0",
>> + "mxs-lradc-button1",
>> +};
>> +
>> +struct mxs_lradc_of_config {
>> + const int irq_count;
>> + const char * const *irq_name;
>> +};
>> +
>> +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
>> + [IMX23_LRADC] = {
>> + .irq_count = ARRAY_SIZE(mx23_lradc_irq_names),
>> + .irq_name = mx23_lradc_irq_names,
>> + },
>> + [IMX28_LRADC] = {
>> + .irq_count = ARRAY_SIZE(mx28_lradc_irq_names),
>> + .irq_name = mx28_lradc_irq_names,
>> + },
>> +};
>> +
>> +static const struct of_device_id mxs_lradc_dt_ids[] = {
>> + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
>> + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
>> +
>> +static int mxs_lradc_probe(struct platform_device *pdev)
>> +{
>> + const struct of_device_id *of_id =
>> + of_match_device(mxs_lradc_dt_ids, &pdev->dev);
>> + const struct mxs_lradc_of_config *of_cfg =
>> + &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
>> + struct device *dev = &pdev->dev;
>> + struct device_node *node = dev->of_node;
>> + struct mxs_lradc *lradc;
>> + struct resource *iores;
>> + int ret = 0, touch_ret, i;
>> + u32 ts_wires = 0;
>> +
>> + lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL);
>> + if (!lradc)
>> + return -ENOMEM;
>> + lradc->soc = (enum mxs_lradc_id)of_id->data;
>> +
>> + /* Grab the memory area */
>> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + lradc->base = devm_ioremap_resource(dev, iores);
>> + if (IS_ERR(lradc->base))
>> + return PTR_ERR(lradc->base);
>> +
>> + lradc->clk = devm_clk_get(&pdev->dev, NULL);
>> + if (IS_ERR(lradc->clk)) {
>> + dev_err(dev, "Failed to get the delay unit clock\n");
>> + return PTR_ERR(lradc->clk);
>> + }
>> + ret = clk_prepare_enable(lradc->clk);
>> + if (ret != 0) {
>> + dev_err(dev, "Failed to enable the delay unit clock\n");
>> + return ret;
>> + }
>> +
>> + touch_ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
>> + &ts_wires);
>> +
>> + if (touch_ret == 0)
>> + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
>> + else
>> + lradc->buffer_vchans = BUFFER_VCHANS_ALL;
>> +
>> + lradc->irq_count = of_cfg->irq_count;
>> + lradc->irq_name = of_cfg->irq_name;
>> + for (i = 0; i < lradc->irq_count; i++) {
>> + lradc->irq[i] = platform_get_irq(pdev, i);
>> + if (lradc->irq[i] < 0) {
>> + ret = lradc->irq[i];
>> + goto err_clk;
>> + }
>> + }
>> +
>> + platform_set_drvdata(pdev, lradc);
>> +
>> + ret = stmp_reset_block(lradc->base);
>> +
>
> Drop this newline here
>
>> + if (ret)
>> + return ret;
>> +
>> + lradc_adc_dev.platform_data = lradc;
>> + lradc_adc_dev.pdata_size = sizeof(*lradc);
>> +
>> + ret = mfd_add_devices(&pdev->dev, -1, &lradc_adc_dev, 1, NULL, 0, NULL);
>
> devm_mfd_add_devices()?
>
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to add the ADC subdevice\n");
>> + return ret;
>> + }
>> +
>> + lradc_ts_dev.platform_data = lradc;
>> + lradc_ts_dev.pdata_size = sizeof(*lradc);
>> +
>> + switch (ts_wires) {
>> + case 4:
>> + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
>> + break;
>> + case 5:
>> + if (lradc->soc == IMX28_LRADC) {
>> + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
>> + break;
>> + }
>> + /* fall through an error message for i.MX23 */
>> + default:
>> + dev_err(&pdev->dev,
>> + "Unsupported number of touchscreen wires (%d)\n",
>> + ts_wires);
>> + return -EINVAL;
>> + }
>> +
>> + ret = mfd_add_devices(&pdev->dev, -1, &lradc_ts_dev, 1, NULL, 0, NULL);
>
> devm_mfd_add_devices()?
>
> You might want to split registration of each MFD subdev into separate
> function.
Ok, I will fix it in v2
>> + if (ret) {
>> + dev_err(&pdev->dev,
>> + "Failed to add the touchscreen subdevice\n");
>> + goto err_remove_adc;
>> + }
>> +
>> + return 0;
>> +
>> +err_remove_adc:
>> + mfd_remove_devices(&pdev->dev);
>> +err_clk:
>> + clk_disable_unprepare(lradc->clk);
>> + return ret;
>> +}
>> +
>> +static int mxs_lradc_remove(struct platform_device *pdev)
>> +{
>> + struct mxs_lradc *lradc = platform_get_drvdata(pdev);
>> +
>> + mfd_remove_devices(&pdev->dev);
>> + clk_disable_unprepare(lradc->clk);
>> + return 0;
>> +}
>> +
>> +static struct platform_driver mxs_lradc_driver = {
>> + .driver = {
>> + .name = "mxs-lradc",
>> + .of_match_table = mxs_lradc_dt_ids,
>> + },
>> + .probe = mxs_lradc_probe,
>> + .remove = mxs_lradc_remove,
>> +};
>> +
>> +module_platform_driver(mxs_lradc_driver);
>> +
>> +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:mxs-lradc");
>
> [...]
>
>
> --
> Best regards,
> Marek Vasut
Powered by blists - more mailing lists