Message-ID: <e16045de7488e8e1b157292b3bd4388e@ccbib.org>
Date:	Fri, 29 Apr 2016 19:19:57 +0200
From:	Harald Geyer <harald@...ib.org>
To:	Ksenija Stanojevic <ksenija.stanojevic@...il.com>
Cc:	<linux-kernel@...r.kernel.org>, <lee.jones@...aro.org>,
	<dmitry.torokhov@...il.com>, <linux-input@...r.kernel.org>,
	<jic23@...nel.org>, <knaack.h@....de>, <lars@...afoo.de>,
	<pmeerw@...erw.net>, <marex@...x.de>, <linux-iio@...r.kernel.org>
Subject: Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD

Hi Ksenija,

thanks for working on this.

A bit of nit picking inline.

On 29.04.2016 13:47, Ksenija Stanojevic wrote:
> Add core files for mxs-lradc MFD driver.
>
> Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@...il.com>
> ---
>  drivers/mfd/Kconfig           |  33 +++++--
>  drivers/mfd/Makefile          |   1 +
>  drivers/mfd/mxs-lradc.c       | 213
> ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/mxs-lradc.h | 210
> +++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 449 insertions(+), 8 deletions(-)
>  create mode 100644 drivers/mfd/mxs-lradc.c
>  create mode 100644 include/linux/mfd/mxs-lradc.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index eea61e3..fff44d6 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -16,7 +16,7 @@ config MFD_CS5535
>  	depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
>  	---help---
>  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
> -          necessary for using the board's GPIO and MFGPT 
> functionality.
> +	  necessary for using the board's GPIO and MFGPT functionality.
>
>  config MFD_ACT8945A
>  	tristate "Active-semi ACT8945A"
> @@ -319,6 +319,23 @@ config MFD_HI6421_PMIC
>  	  menus in order to enable them.
>  	  We communicate with the Hi6421 via memory-mapped I/O.
>
> +config MFD_MXS_LRADC
> +	tristate "Freescale i.MX23/i.MX28 LRADC"
> +	depends on ARCH_MXS || COMPILE_TEST
> +	select MFD_CORE
> +	select STMP_DEVICE
> +	help
> +	  Say yes here to build support for the low-resolution
> +	  analog-to-digital converter (LRADC) found on the i.MX23 and 
> i.MX28
> +	  processors. This driver provides common support for accessing the
> +	  device, additional drivers must be enabled in order to use the
> +	  functionality of the device:
> +		mxs-lradc-adc for ADC readings
> +		mxs-lradc-ts  for touchscreen support
> +
> +	  This driver can also be built as a module. If so, the module will 
> be
> +	  called mxs-lradc.
> +
>  config HTC_EGPIO
>  	bool "HTC EGPIO support"
>  	depends on GPIOLIB && ARM
> @@ -650,7 +667,7 @@ config EZX_PCAP
>  	  needed for MMC, TouchScreen, Sound, USB, etc..
>
>  config MFD_VIPERBOARD
> -        tristate "Nano River Technologies Viperboard"
> +	tristate "Nano River Technologies Viperboard"
>  	select MFD_CORE
>  	depends on USB
>  	default n
> @@ -898,11 +915,11 @@ config MFD_SMSC
>         select MFD_CORE
>         select REGMAP_I2C
>         help
> -        If you say yes here you get support for the
> -        ece1099 chips from SMSC.
> +	If you say yes here you get support for the
> +	ece1099 chips from SMSC.
>
> -        To compile this driver as a module, choose M here: the
> -        module will be called smsc.
> +	To compile this driver as a module, choose M here: the
> +	module will be called smsc.
>
>  config ABX500_CORE
>  	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
> @@ -956,8 +973,8 @@ config AB8500_DEBUG
>         depends on AB8500_GPADC && DEBUG_FS
>         default y if DEBUG_FS
>         help
> -         Select this option if you want debug information using the 
> debug
> -         filesystem, debugfs.
> +	 Select this option if you want debug information using the debug
> +	 filesystem, debugfs.
>
>  config AB8500_GPADC
>  	bool "ST-Ericsson AB8500 GPADC driver"
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5eaa6465d..236b831 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -203,3 +203,4 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o
> intel_soc_pmic_crc.o
>  intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
>  obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
>  obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
> +obj-$(CONFIG_MFD_MXS_LRADC)	+= mxs-lradc.o
> diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c
> new file mode 100644
> index 0000000..e1c8f9e
> --- /dev/null
> +++ b/drivers/mfd/mxs-lradc.c
> @@ -0,0 +1,213 @@
> +/*
> + * Freescale MXS LRADC driver
> + *
> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
> + * Marek Vasut <marex@...x.de>
> + *
> + * This program is free software; you can redistribute it and/or 
> modify
> + * it under the terms of the GNU General Public License as published 
> by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/mxs-lradc.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>

IIRC all necessary header files should be included directly from
the source file instead of being pulled in by other header files.

> +static struct mfd_cell lradc_adc_dev = {
> +	.name = DRIVER_NAME_ADC,
> +};
> +
> +static struct mfd_cell lradc_ts_dev = {
> +	.name = DRIVER_NAME_TS,
> +};

All chips using this driver have only one instance of this, so
the above static structs are fine. However below
struct mxs-lradc is allocated dynamically (to allow for
multiple lradc blocks in theory I suppose). I don't have
strong feelings either way, but I think you should make up
your mind one way or the other.

I'd make these structs either members of mxs-lradc or even
allocate them dynamically.

Thanks,
Harald

> +static const char * const mx23_lradc_irq_names[] = {
> +	"mxs-lradc-touchscreen",
> +	"mxs-lradc-channel0",
> +	"mxs-lradc-channel1",
> +	"mxs-lradc-channel2",
> +	"mxs-lradc-channel3",
> +	"mxs-lradc-channel4",
> +	"mxs-lradc-channel5",
> +	"mxs-lradc-channel6",
> +	"mxs-lradc-channel7",
> +};
> +
> +static const char * const mx28_lradc_irq_names[] = {
> +	"mxs-lradc-touchscreen",
> +	"mxs-lradc-thresh0",
> +	"mxs-lradc-thresh1",
> +	"mxs-lradc-channel0",
> +	"mxs-lradc-channel1",
> +	"mxs-lradc-channel2",
> +	"mxs-lradc-channel3",
> +	"mxs-lradc-channel4",
> +	"mxs-lradc-channel5",
> +	"mxs-lradc-channel6",
> +	"mxs-lradc-channel7",
> +	"mxs-lradc-button0",
> +	"mxs-lradc-button1",
> +};
> +
> +struct mxs_lradc_of_config {
> +	const int		irq_count;
> +	const char * const	*irq_name;
> +};
> +
> +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
> +	[IMX23_LRADC] = {
> +		.irq_count	= ARRAY_SIZE(mx23_lradc_irq_names),
> +		.irq_name	= mx23_lradc_irq_names,
> +	},
> +	[IMX28_LRADC] = {
> +		.irq_count	= ARRAY_SIZE(mx28_lradc_irq_names),
> +		.irq_name	= mx28_lradc_irq_names,
> +	},
> +};
> +
> +static const struct of_device_id mxs_lradc_dt_ids[] = {
> +	{ .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
> +	{ .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
> +
> +static int mxs_lradc_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *of_id =
> +		of_match_device(mxs_lradc_dt_ids, &pdev->dev);
> +	const struct mxs_lradc_of_config *of_cfg =
> +		&mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct mxs_lradc *lradc;
> +	struct resource *iores;
> +	int ret = 0, touch_ret, i;
> +	u32 ts_wires = 0;
> +
> +	lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL);
> +	if (!lradc)
> +		return -ENOMEM;
> +	lradc->soc = (enum mxs_lradc_id)of_id->data;
> +
> +	/* Grab the memory area */
> +	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	lradc->base = devm_ioremap_resource(dev, iores);
> +	if (IS_ERR(lradc->base))
> +		return PTR_ERR(lradc->base);
> +
> +	lradc->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(lradc->clk)) {
> +		dev_err(dev, "Failed to get the delay unit clock\n");
> +		return PTR_ERR(lradc->clk);
> +	}
> +	ret = clk_prepare_enable(lradc->clk);
> +	if (ret != 0) {
> +		dev_err(dev, "Failed to enable the delay unit clock\n");
> +		return ret;
> +	}
> +
> +	touch_ret = of_property_read_u32(node, 
> "fsl,lradc-touchscreen-wires",
> +					 &ts_wires);
> +
> +	if (touch_ret == 0)
> +		lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
> +	else
> +		lradc->buffer_vchans = BUFFER_VCHANS_ALL;
> +
> +	lradc->irq_count = of_cfg->irq_count;
> +	lradc->irq_name = of_cfg->irq_name;
> +	for (i = 0; i < lradc->irq_count; i++) {
> +		lradc->irq[i] = platform_get_irq(pdev, i);
> +		if (lradc->irq[i] < 0) {
> +			ret = lradc->irq[i];
> +			goto err_clk;
> +		}
> +	}
> +
> +	platform_set_drvdata(pdev, lradc);
> +
> +	ret = stmp_reset_block(lradc->base);
> +
> +	if (ret)
> +		return ret;
> +
> +	lradc_adc_dev.platform_data = lradc;
> +	lradc_adc_dev.pdata_size = sizeof(*lradc);
> +
> +	ret = mfd_add_devices(&pdev->dev, -1, &lradc_adc_dev, 1, NULL, 0, 
> NULL);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to add the ADC subdevice\n");
> +		return ret;
> +	}
> +
> +	lradc_ts_dev.platform_data = lradc;
> +	lradc_ts_dev.pdata_size = sizeof(*lradc);
> +
> +	switch (ts_wires) {
> +	case 4:
> +		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
> +		break;
> +	case 5:
> +		if (lradc->soc == IMX28_LRADC) {
> +			lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
> +			break;
> +		}
> +		/* fall through an error message for i.MX23 */
> +	default:
> +		dev_err(&pdev->dev,
> +			"Unsupported number of touchscreen wires (%d)\n",
> +			ts_wires);
> +		return -EINVAL;
> +	}
> +
> +	ret = mfd_add_devices(&pdev->dev, -1, &lradc_ts_dev, 1, NULL, 0, 
> NULL);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Failed to add the touchscreen subdevice\n");
> +		goto err_remove_adc;
> +	}
> +
> +	return 0;
> +
> +err_remove_adc:
> +	mfd_remove_devices(&pdev->dev);
> +err_clk:
> +	clk_disable_unprepare(lradc->clk);
> +	return ret;
> +}
> +
> +static int mxs_lradc_remove(struct platform_device *pdev)
> +{
> +	struct mxs_lradc *lradc = platform_get_drvdata(pdev);
> +
> +	mfd_remove_devices(&pdev->dev);
> +	clk_disable_unprepare(lradc->clk);
> +	return 0;
> +}
> +
> +static struct platform_driver mxs_lradc_driver = {
> +	.driver = {
> +		.name = "mxs-lradc",
> +		.of_match_table = mxs_lradc_dt_ids,
> +	},
> +	.probe = mxs_lradc_probe,
> +	.remove = mxs_lradc_remove,
> +};
> +
> +module_platform_driver(mxs_lradc_driver);
> +
> +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:mxs-lradc");
> diff --git a/include/linux/mfd/mxs-lradc.h 
> b/include/linux/mfd/mxs-lradc.h
> new file mode 100644
> index 0000000..c062969
> --- /dev/null
> +++ b/include/linux/mfd/mxs-lradc.h
> @@ -0,0 +1,210 @@
> +/*
> + * Freescale MXS LRADC driver
> + *
> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
> + * Marek Vasut <marex@...x.de>
> + *
> + * This program is free software; you can redistribute it and/or 
> modify
> + * it under the terms of the GNU General Public License as published 
> by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MXS_LRADC_H
> +#define __MXS_LRADC_H
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/stmp_device.h>
> +#include <linux/sysfs.h>
> +
> +#define DRIVER_NAME_ADC "mxs-lradc-adc"
> +#define DRIVER_NAME_TS "mxs-lradc-ts"
> +
> +#define LRADC_MAX_DELAY_CHANS	4
> +#define LRADC_MAX_MAPPED_CHANS	8
> +#define LRADC_MAX_TOTAL_CHANS	16
> +
> +#define LRADC_DELAY_TIMER_HZ	2000
> +
> +#define LRADC_CTRL0				0x00
> +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	BIT(23)
> +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	BIT(22)
> +# define LRADC_CTRL0_MX28_YNNSW /* YM */	BIT(21)
> +# define LRADC_CTRL0_MX28_YPNSW /* YP */	BIT(20)
> +# define LRADC_CTRL0_MX28_YPPSW /* YP */	BIT(19)
> +# define LRADC_CTRL0_MX28_XNNSW /* XM */	BIT(18)
> +# define LRADC_CTRL0_MX28_XNPSW /* XM */	BIT(17)
> +# define LRADC_CTRL0_MX28_XPPSW /* XP */	BIT(16)
> +
> +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	BIT(20)
> +# define LRADC_CTRL0_MX23_YM			BIT(19)
> +# define LRADC_CTRL0_MX23_XM			BIT(18)
> +# define LRADC_CTRL0_MX23_YP			BIT(17)
> +# define LRADC_CTRL0_MX23_XP			BIT(16)
> +
> +# define LRADC_CTRL0_MX28_PLATE_MASK \
> +		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
> +		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
> +		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
> +		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
> +
> +# define LRADC_CTRL0_MX23_PLATE_MASK \
> +		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
> +		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
> +		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
> +
> +#define LRADC_CTRL1				0x10
> +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		BIT(24)
> +#define LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
> +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
> +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
> +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
> +#define LRADC_CTRL1_TOUCH_DETECT_IRQ		BIT(8)
> +#define LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
> +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
> +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
> +#define LRADC_CTRL1_LRADC_IRQ_OFFSET		0
> +
> +#define LRADC_CTRL2				0x20
> +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET	24
> +#define LRADC_CTRL2_TEMPSENSE_PWD		BIT(15)
> +
> +#define LRADC_STATUS				0x40
> +#define LRADC_STATUS_TOUCH_DETECT_RAW		BIT(0)
> +
> +#define LRADC_CH(n)				(0x50 + (0x10 * (n)))
> +#define LRADC_CH_ACCUMULATE			BIT(29)
> +#define LRADC_CH_NUM_SAMPLES_MASK		(0x1f << 24)
> +#define LRADC_CH_NUM_SAMPLES_OFFSET		24
> +#define LRADC_CH_NUM_SAMPLES(x) \
> +				((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
> +#define LRADC_CH_VALUE_MASK			0x3ffff
> +#define LRADC_CH_VALUE_OFFSET			0
> +
> +#define LRADC_DELAY(n)				(0xd0 + (0x10 * (n)))
> +#define LRADC_DELAY_TRIGGER_LRADCS_MASK		(0xffUL << 24)
> +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET	24
> +#define LRADC_DELAY_TRIGGER(x) \
> +				(((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
> +				LRADC_DELAY_TRIGGER_LRADCS_MASK)
> +#define LRADC_DELAY_KICK			BIT(20)
> +#define LRADC_DELAY_TRIGGER_DELAYS_MASK		(0xf << 16)
> +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET	16
> +#define LRADC_DELAY_TRIGGER_DELAYS(x) \
> +				(((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
> +				LRADC_DELAY_TRIGGER_DELAYS_MASK)
> +#define LRADC_DELAY_LOOP_COUNT_MASK		(0x1f << 11)
> +#define LRADC_DELAY_LOOP_COUNT_OFFSET		11
> +#define LRADC_DELAY_LOOP(x) \
> +				(((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
> +				LRADC_DELAY_LOOP_COUNT_MASK)
> +#define LRADC_DELAY_DELAY_MASK			0x7ff
> +#define LRADC_DELAY_DELAY_OFFSET		0
> +#define LRADC_DELAY_DELAY(x) \
> +				(((x) << LRADC_DELAY_DELAY_OFFSET) & \
> +				LRADC_DELAY_DELAY_MASK)
> +
> +#define LRADC_CTRL4				0x140
> +#define LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
> +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n)	((n) * 4)
> +#define LRADC_CTRL4_LRADCSELECT(n, x) \
> +				(((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
> +				LRADC_CTRL4_LRADCSELECT_MASK(n))
> +
> +#define LRADC_RESOLUTION			12
> +#define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
> +
> +enum mxs_lradc_id {
> +	IMX23_LRADC,
> +	IMX28_LRADC,
> +};
> +
> +enum mxs_lradc_ts_wires {
> +	MXS_LRADC_TOUCHSCREEN_NONE = 0,
> +	MXS_LRADC_TOUCHSCREEN_4WIRE,
> +	MXS_LRADC_TOUCHSCREEN_5WIRE,
> +};
> +
> +struct mxs_lradc {
> +	enum mxs_lradc_id	soc;
> +
> +	void __iomem		*base;
> +	struct clk		*clk;
> +
> +	int			irq[13];
> +	const char * const	*irq_name;
> +	int			irq_count;
> +
> +#define BUFFER_VCHANS_LIMITED		0x3f
> +#define BUFFER_VCHANS_ALL		0xff
> +	u8			buffer_vchans;
> +
> +	/*
> +	 * Certain LRADC channels are shared between touchscreen
> +	 * and/or touch-buttons and generic LRADC block. Therefore when 
> using
> +	 * either of these, these channels are not available for the 
> regular
> +	 * sampling. The shared channels are as follows:
> +	 *
> +	 * CH0 -- Touch button #0
> +	 * CH1 -- Touch button #1
> +	 * CH2 -- Touch screen XPUL
> +	 * CH3 -- Touch screen YPLL
> +	 * CH4 -- Touch screen XNUL
> +	 * CH5 -- Touch screen YNLR
> +	 * CH6 -- Touch screen WIPER (5-wire only)
> +	 *
> +	 * The bit fields below represents which parts of the LRADC block 
> are
> +	 * switched into special mode of operation. These channels can not
> +	 * be sampled as regular LRADC channels. The driver will refuse any
> +	 * attempt to sample these channels.
> +	 */
> +#define CHAN_MASK_TOUCHBUTTON		(BIT(1) | BIT(0))
> +#define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 2)
> +#define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 2)
> +	enum mxs_lradc_ts_wires	use_touchscreen;
> +	bool			use_touchbutton;
> +};
> +
> +static inline void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32
> val, u32 reg)
> +{
> +	writel(val, lradc->base + reg + STMP_OFFSET_REG_SET);
> +}
> +
> +static inline void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 
> val,
> +				       u32 reg)
> +{
> +	writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR);
> +}
> +
> +static inline void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32
> val, u32 reg)
> +{
> +	writel(val, lradc->base + reg);
> +}
> +
> +static inline u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
> +{
> +	if (lradc->soc == IMX23_LRADC)
> +		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
> +	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
> +}
> +
> +#endif /* __MXS_LRADC_H */

-- 
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
or bitcoin 1FUtd8T9jRN1rFz63vZz7s2fDtB6d6A7aS

Powered by blists - more mailing lists