[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160501164252.GA3581@kozik-lap>
Date: Sun, 1 May 2016 18:42:52 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Hans Verkuil <hverkuil@...all.nl>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-usb@...r.kernel.org,
linux.amoon@...il.com, tjakobi@...h.uni-bielefeld.de,
m.szyprowski@...sung.com,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP
booting
On Sun, May 01, 2016 at 06:01:08PM +0200, Hans Verkuil wrote:
> > Sorry, I meant the hanging issue I got in 4.6, not the ethernet issue.
> > I get the same problem with linux-next. Can you mail me the .config you are using?
>
> Never mind.
>
> > After some more testing I don't think it is hanging, instead it seems that the mmc
> > isn't enabled/found and so it just sits waiting for the root partition to appear.
>
> That was fun. There are two problems that both caused the boot to end at the same
> place: first of all the root partition is now called mmcblk1p1 instead of mmcblk0p1
> in 4.6, so it was just waiting for the root partition to appear. Nothing to do with
> your patch series, just unexpected.
Yes, annoying issue and unfortunately this is known... recommended
solution is to use root=PARTUUID=xxxx (you can get the PARTUUID with
blkid)... or replace the mmc device.
> The second is that enabling CONFIG_VIDEO_S5P_FIMC causes the boot to hang at that
> same place. I suspect there is a deadlock somewhere. I'm digging deeper into that
> but again, unrelated to your patch series.
>
> Anyway, after disabling that config option I was finally able to test your patch
> series:
>
> Tested-by: Hans Verkuil <hans.verkuil@...co.com>
Thanks!
Best regards,
Krzysztof
Powered by blists - more mailing lists